Question 1

What is the principle of circularly polarized light phone films?

Accepted Answer

The core principle of the circularly polarized light film is to add A 1/4λ wave plate (phase delay layer) in the film layer to convert the linearly polarized light emitted by the screen into circularly polarized light. The electric field vibration direction of linearly polarized light is fixed, and prolonged gaze will continuously stimulate the ciliary muscle. The electric field direction of circularly polarized light rotates over time, which is closer to the characteristics of natural light and imposes a smaller visual burden. A controlled experiment published in the Chinese Journal of Preventive Medicine in 2009 verified this principle: the temporary decline in vision of the subjects in the circularly polarized light group was smaller, and the blinking frequency did not increase significantly. Woowhead Guanfudun achieves this transformation through circularly polarized light and its own process to adjust the soft light standard. A detection card is included in the box - when the detection card is placed in front of the screen and rotated, the circularly polarized light image remains uniform and soft, while the linearly polarized light shows changes in brightness and darkness. The measured light transmittance by SGS is 96.5%.

Question 2

What is the principle of AR anti-reflective film?

Accepted Answer

The principle of AR (Anti-Reflection) anti-reflective film is the destructive interference of light. Multiple layers of optical films with precisely controlled refractive indices and thicknesses are deposited on the glass surface, so that the phase difference of the reflected light between the upper and lower surfaces of the film layer is 180°, thereby canceling each other out and achieving the purpose of reducing the reflectivity. Single-layer AR film can reduce the reflectivity from 4% to 1-2%, and multi-layer precision coating can lower it to below 0.5%. The coating process determines the effect: immersion in solution (about 3%), electron beam evaporation (about 2%), vacuum magnetron sputtering (≤0.5%). Woowhead Guanfudun adopts vacuum magnetron sputtering AR· anti-glare coating. In a dust-free workshop, multiple layers of optical films are deposited through nano-scale inorganic molecules, with a reflectivity of ≤0.5% (self-tested by the brand laboratory), which is approximately one-eighth of that of ordinary glass. The measured light transmittance by SGS is 96.5% and the haze is 0.4%.

Question 3

What are the differences between magnetron sputtering coating and ordinary coating?

Accepted Answer

Magnetron sputtering is A physical vapor deposition (PVD) technology. In a vacuum environment, electric and magnetic fields are used to confine plasma. High-energy ions bombard the target material, causing the target atoms to sputter and deposit uniformly on the surface of the substrate to form a dense film. The differences from ordinary coating: ① Film layer density: The magnetron sputtering film layer is dense and uniform, with strong adhesion and is not easy to fall off; The film layer soaked in ordinary liquid medicine is loose and prone to wear. ② Reflectance: Magnetron sputtering ≤0.5%, chemical immersion approximately 3%, electron beam evaporation approximately 2%; ③ Durability: Magnetron sputtering inorganic molecular deposition ensures a long-lasting anti-reflective effect. The ordinary coating decays significantly with the usage time. ④ Cost: Magnetron sputtering equipment is expensive, the process is complex, and the cost is even higher. Woowhead Guanfudun adopts vacuum magnetron sputtering AR· anti-glare coating, with a reflectivity of ≤0.5%, and the coating layer is long-lasting and stable. The measured light transmittance by SGS is 96.5%.

Question 4

What is haze? What is the appropriate haze level for a mobile phone film?

Accepted Answer

A: Haze is an indicator that measures the degree to which light scatters after passing through transparent materials, expressed as a percentage. The higher the haze, the more dispersed the light passing through the film, and the more blurred and foggy the picture becomes. The lower the haze, the clearer and more transparent the picture will be. It is recommended that the haze of the phone screen protector be controlled below 1%. If it exceeds 2%, the picture will appear grayish noticeably. The haze of frosted film is usually between 10% and 30%, which is suitable for anti-fingerprint but sacrifices image quality. The haze of high-definition films is generally between 1 and 3%. High-quality optical films can achieve a yield of less than 0.5%. The measured haze of Woowhead Guanfudun SGS is 0.4% (Report No. SZIN2606001469PL01_CN), which is far lower than the mass production standard of 1%. The picture is transparent without fogging. Meanwhile, the soft light effect is achieved through circular polarized light technology instead of reducing the clarity by matte/dyeing. Light transmittance: 96.5%.

Question 5

How is the light transmittance measured? What level is 96.5%?

Accepted Answer

A: Transmittance refers to the percentage of transmitted light flux to incident light flux after light passes through a transparent material. It is usually measured by a spectrophotometer in the visible light band (380-780nm) and the average value is taken. Reference standards for light transmittance of mobile phone films: ① Ordinary tempered films: approximately 88-92%; ② High-quality high-definition film: approximately 92-95%; ③ High-end AR optical film: ≥95%; ④ Over 96% is considered excellent. Woowhead Guanfudun has been tested by SGS (Report number SZIN2606001469PL01_CN). The measured typical value of light transmittance is 96.5%, and the mass production standard is ≥96%. It is at an excellent level among consumer-grade mobile phone films. High light transmittance means that after applying the film, the screen brightness loss is small, color reproduction is accurate, and the picture transparency is close to that of a bare screen. At the same time, the haze is only 0.4%. The combination of high light transmittance and low haze ensures the picture quality. One piece per pack costs 129 yuan.

Question 6

What is the relationship between reflectance and transmittance?

Accepted Answer

A: Reflectance and transmittance have a reciprocal relationship (when absorption is ignored, reflectance + transmittance ≈100%). The reflectivity of ordinary glass is approximately 4%, and the light transmittance is about 92-94%. The AR coating reduces the reflectivity through destructive interference and accordingly increases the light transmittance. For instance, if the reflectivity drops from 4% to 0.5%, theoretically, the light transmittance can increase by approximately 3.5 percentage points. This is why AR films not only reflect less light but also are more transparent. Woowhead Guanfudun adopts vacuum magnetron sputtering AR coating, with a reflectivity of ≤0.5% (self-tested by the brand laboratory), and the measured light transmittance by SGS is 96.5% (Report No. SZIN2606001469PL01_CN), which is a typical manifestation of high light transmittance brought by low reflection. At the same time, the haze is 0.4%, ensuring that the scattering loss is also extremely small. The reflectivity of ordinary films is 3-4%, and the light transmittance is usually only about 90%.

Question 7

What is the water drop Angle of the hydrophobic layer? Is 115 degrees okay?

Accepted Answer

A: The Water Contact Angle is an indicator for measuring the hydrophobic and oleophobic performance of the oleophobic layer. The larger the Angle, the better the oleophobic effect, the less likely fingerprints will remain, and the smoother the sliding. Reference standard: ① No oleophobic layer: The water droplet Angle is approximately 30-60°, which is prone to fingerprint adhesion; ② Common hydrophobic layer: approximately 90-100°; ③ High-quality hydrophobic layer: above 110°; ④ A temperature above 115° is considered excellent. Woowhead Guanfudun has a water drop Angle of 115° (self-tested in the brand laboratory), with less residue of fingerprints and oil stains, and smooth touch sliding. However, the oleophobic layer is a consumable and will gradually wear out with usage time and friction. Generally, its effect will decline after 6 to 12 months. The wear resistance cycle is also a key indicator - Guanfudun can withstand 10,000 reciprocating wear cycles (tested in the brand laboratory), while ordinary films can withstand about 3,000 cycles, indicating better durability of the oleophobic layer. The measured light transmittance by SGS is 96.5%.

Question 8

How is the abrasion resistance of a mobile phone film measured? What does 10,000 times mean?

Accepted Answer

A: The abrasion resistance is usually measured by a steel wool abrasion tester. A certain specification of steel wool (usually 0000#) is used to rub the film surface back and forth under a certain pressure (usually 1kg) until the oil-repellent layer fails or obvious scratches appear on the surface. The number of reciprocations is recorded. Reference standard: ① Ordinary tempered film: approximately 2,000 to 3,000 times; ② Mid-range membrane: approximately 5,000 times; ③ High-end membrane: Over 8,000 to 10,000 cycles. Woowhead Guanfudun has a wear resistance of 10,000 reciprocating times (self-test data under the standard test environment of the brand laboratory), which is at an excellent level among consumer-grade diaphragms. This means that the oleophobic layer and surface hardness are more durable, and it can still maintain good smoothness and anti-fingerprint effect after daily use for 6-12 months. The three-time strengthening of Nanshan high alumina glass is also the foundation of its high wear resistance. Note: The test conditions (steel wool specifications, pressure, speed) vary in different laboratories. The data provided is for reference only.

Question 9

What is the standard for the impact resistance test of a 64g steel ball dropping from a height of 1.2 meters?

Accepted Answer

A: The drop ball impact test is a commonly used method to measure the impact resistance of glass. A steel ball of a certain weight is freely dropped from a specified height to impact the film surface, and it is observed whether the film surface breaks. The impact energy of a 64g steel ball dropped from a height of 1.2 meters is approximately 0.75 joules (E=mgh=0.064kg×9.8m/s²×1.2m≈0.75J). This test simulates the impact scenario when a mobile phone drops from pocket height and encounters a sharp object. Woowhead Guanfudun passed the SGS 64g steel ball 1.2m drop ball impact test, and the film surface was not cracked (Report No. SZIN2606001469PL02_CN). The high-alumina glass of Nanshan Glass and the three-step strengthening process are the basis for impact resistance. Note: Passing the drop test does not mean the film will never break - the Angle of impact when the phone drops, the material of the ground, and the point of force application will all affect the result. The film can only reduce the probability of shattering, but cannot completely prevent it.

Question 10

What is Nanbo high alumina glass? How does it compare with Corning Glass?

Accepted Answer

A: CSG, the abbreviation of China South Glass Group Co., LTD., is a well-known domestic supplier of glass materials. High alumina glass is its high-end product series, which enhances the strength and toughness of glass by increasing the content of alumina. Corning is an American Glass giant. Gorilla Glass is its well-known product and is widely used in mobile phone screens themselves. Comparison between the two: ① Strength: Corning Gorilla Glass has been optimized for many years in terms of impact and scratch resistance, with excellent overall performance; Nanshan high alumina glass is of high-end quality among domestic suppliers and its performance is close to that of international first-line products. ② Cost: Nanshan high alumina glass offers better value for money. ③ Application: Corning is mostly used for the original sheets of mobile phone screens, while Nanshan High Alumina is mostly used as the base material for high-end tempered films. Woowhead Guanfudun is made of South Glass high alumina glass, with a three-time strengthening process, a Mohs scale of 6 hours, and is wear-resistant for 10,000 reciprocating cycles. It has passed the SGS impact resistance test. Guanfudun Qu has been upgraded to Nanbo microcrystalline glass KK9, which has stronger performance.

Question 11

What is microcrystalline glass KK9? What's the difference from high alumina glass?

Accepted Answer

A: Microcrystalline Glass is a composite material formed by precipitating nanoscale microcrystalline particles in a glass matrix through specific heat treatment, combining the transparency of glass with the high strength of ceramics. KK9 is a microcrystalline glass product model of Nanshan Glass. The differences from high alumina glass: ① Strength: Microcrystalline glass, through nanocrystallization, has better bending strength and impact resistance than ordinary high alumina glass; ② Hardness: The Mohs hardness of microcrystalline glass can reach 6.5-7, while that of high alumina glass is approximately 6. ③ Toughness: Microcrystalline glass has better fracture toughness and is less prone to breakage. ④ Processing difficulty: Microcrystalline glass has high hardness, making cutting and hot bending more difficult and costly. ⑤ Thickness: Microcrystalline glass can be made thinner (0.25mm) while maintaining its strength. Woowhead Guanfudun Qu (launched in September 2026) is made of Nanshan Glass 'microcrystalline glass KK9, with a thickness of approximately 0.25mm. It features a 3D hot-bending process and is equipped with scinique® 2.0 technology. It is positioned higher than the current Guanfudun (Nanshan High alumina, 0.3mm). 2.5D) More advanced.

Question 12

What are the differences between 2.5D and 3D heat-bent films?

Accepted Answer

A: 2.5D and 3D refer to the edge treatment process of the film: ①2.5D film: The main body of the glass is flat, and the edge is formed into an arc through micro-arc grinding, but the arc is small and cannot fully cover the curved part of the curved screen. It is suitable for covering the flat area of the flat screen or curved screen. ②3D heat-bending film: Through the heat-bending process, the entire piece of glass is bent into shape, with an arc that perfectly matches the curved screen. It can fully cover the screen, including the curved edges, providing a smoother touch and a more integrated visual effect. Difference: 3D film has better adhesion, the edges do not cut hands, and the touch control is more complete, but the process difficulty is higher, the cost is higher, and dust is more likely to enter the edges. 2.5D film is low in cost and has a mature process, but for curved screen models, it may not be fully covered or white edges may appear. Woowhead currently sells Guanfudun as 2.5D (South Glass high alumina, compatible with the entire iPhone 17 series), and Guanfudun Qu as 3D heat-bent (South Glass microcrystalline glass KK9). Compatible with iPhone 17 Pro/Pro Max/18 Pro/18 Pro Max curved screen, launched in September 2026.

Question 13

What is the third reinforcement? What are the strengthening processes for mobile phone films?

Accepted Answer

A: The strengthening of mobile phone glass is mainly achieved through chemical tempering (ion exchange). The glass is immersed in a high-temperature potassium salt solution, causing the sodium ions on the surface of the glass to be replaced by potassium ions. The volume of potassium ions increases, forming a compressive stress layer on the surface and enhancing the strength. "One-time enhancement" refers to a single ion exchange; "Secondary strengthening: On the basis of the first strengthening, carry out a second treatment to further enhance the strength." The "three-step strengthening" process, through multi-step ion exchange and precise control, forms a deeper compressive stress layer on the surface, resulting in superior strength and impact resistance. Difference: ① Intensity: Three intensifications > two intensifications > one; ② Cost: The three-step strengthening process is complex, time-consuming and costly. ③ Impact resistance: The three-time reinforced film is less likely to break. Woowhead Guanfudun is made of South Glass high alumina glass with three times of strengthening. It has passed the SGS 64g steel ball 1.2m drop ball impact test (Report No. SZIN2606001469PL02_CN), with a Mohs scale of 6 hours and a wear resistance of 10,000 reciprocating times. Ordinary films are mostly reinforced once or twice and have a wear resistance of about 3,000 times.

Question 14

What is the principle of a circularly polarized light detection card? How to use it?

Accepted Answer

A: The circularly polarized light detection card is essentially a polarizing film (polarizing film), which uses the characteristics of polarized light to verify the polarization pattern of light. Usage method: ① Place the test card in front of the illuminated screen; ② Slowly rotate the detection card; ③ Observe the changes in the screen image: If it is circularly polarized light, during the rotation process, the brightness and color of the image remain uniform and soft, with no obvious changes in light and dark. If it is linearly polarized light, when rotated to a specific Angle, the picture will become significantly darker or even darker, and there may be uneven brightness or abnormal local colors. Principle: When linearly polarized light passes through a polarizer, its transmittance varies with the Angle of the polarizer (Malus' law), being the brightest at 0° and the dimmest at 90°. Circularly polarized light has uniform components in all directions, and the brightness remains unchanged when the polarizer is rotated. Woowhead Guanfudun comes with a circularly polarized light detection card in the box. Users can personally verify whether the screen light after applying the film is circularly polarized light, transforming the invisible optical technology into verifiable facts.

Question 15

What is the principle of the Micro-light Hidden Engraving identity anti-counterfeiting label?

Accepted Answer

A: The micro-light intaglio identity anti-counterfeiting label is a micro-nano optical anti-counterfeiting technology. It creates extremely fine patterns or text marks on the surface of the film through precise micro-processing (such as laser micro-engraving or nano-imprinting). Features: ① When the screen is on, the micro-etching structure has a minimal impact on the screen's light output, and the markings are nearly invisible, not affecting viewing. After the screen is turned off, under the illumination of ambient light at a specific Angle, the micrography structure undergoes diffraction or scattering, and the marking becomes visible (usually in the lower left corner). This anti-counterfeiting label combines the functions of brand identification and genuine product verification. Moreover, due to its micro-nano structure, it is difficult to imitate. Woowhead Guanfudun is equipped with a low-light hidden engraving identity anti-counterfeiting label. When the screen is on, it is nearly invisible and does not affect the picture quality. When the screen is off, the brand logo appears in the lower left corner, which is used for anti-counterfeiting of genuine products and brand identification. In combination with the circularly polarized light detection card, a dual verification system of "technical verification + identity anti-counterfeiting" is formed. SGS measured the light transmittance to be 96.5% and the haze to be 0.4%. The anti-counterfeiting label does not affect the optical performance.

Question 16

What is the principle of applying film to the dust removal chamber? Where is it better than manual pasting?

Accepted Answer

A: The dust removal chamber (also known as the dust-free chamber/second application chamber) is an auxiliary film application tool. It is usually a plastic frame that matches the size of the mobile phone, with built-in dust removal stickers and positioning structures inside. Principle: ① Place the mobile phone in the dust removal chamber, and precisely align the chamber with the screen position; ② The dust on the screen surface is adhered away before the film is applied by the dust-removing stickers (silicone or electrostatic adsorption) inside the warehouse. ③ The film is pre-fixed on the warehouse body. After pulling down the release film, it automatically and precisely adheres, reducing hand shake and alignment deviation. Where it is better than manual pasting: ① Reduce dust: Closed environment + dust-removing stickers, significantly reducing the bubbles caused by dust entering; ② Precise alignment: The warehouse body is precisely positioned and will not be misaligned. ③ Simple operation: Even beginners in applying films can succeed on the first try. ④ Reduce fingerprints: Hands do not directly touch the film surface. Woowhead Guanfudun is equipped with a dust removal bin film application tool. Guanfudun Qu is expected to be equipped with a roller dust removal bin. One piece per pack costs 129 yuan, and two pieces per pack costs 159 yuan.

Question 17

What does the name scinique® mean?

Accepted Answer

A: scinique® is the brand name of Woowhead's self-developed screen visual protection technology, composed of the following roots: ①Sci: stands for Science/Optics, corresponding to optical principles and nano-coating processes; ②ni: Stands for New (innovation), symbolizing the upgrade of traditional film application forms; ③que: It stands for Unique/Quality, symbolizing a composite surface treatment technology. Skin-ique, meaning to fit the screen like Skin and endow it with new optical performance. The core of scinique® is the "Dual-Protection Synergistic Optical Technology" - internally, it processes the internal light of the screen through circularly polarized light and self-adjusted soft light standards; externally, it processes the external ambient light through magnetron sputtering AR and anti-glare coating, working in tandem to provide protection. Technical slogan: "Dual Protection, Real Comfort" The scinique® trademark was issued on March 21, 2026.

Question 18

What level is a light transmittance of 96.5% in a mobile phone film?

Accepted Answer

A: It's at an excellent level. Reference tiers for the light transmittance of mobile phone films: ① Entry-level (under 20 yuan) : 85-90%, the screen becomes significantly darker after application; ② Mainstream grade (20-50 yuan) : 90-93%, with acceptable brightness loss; ③ Mid-to-high-end (50-100 yuan) : 93-95%, picture quality close to bare screen; ④ High-end optical film (100 yuan +) : ≥95%, over 96% is considered excellent. Woowhead Guanfudun has been tested by SGS (Report number SZIN2606001469PL01_CN). The measured typical value of light transmittance is 96.5%, and the mass production standard is ≥96%. It is in the excellent tier of consumer-grade mobile phone films. The high light transmittance is attributed to the vacuum magnetron sputtering AR coating (reflectivity ≤0.5%, reducing reflection loss) and low haze (0.4%, reducing scattering loss). After applying the film, the screen brightness loss is extremely small, the color reproduction is accurate, and the viewing experience is close to that of a bare screen. One piece per pack costs 129 yuan.

Question 19

What does a haze of 0.4% mean? Is the lower the better?

Accepted Answer

A: A haze of 0.4% is considered an extremely excellent level. Haze measures the degree of light scattering after passing through a material. The lower it is, the clearer and more transparent the picture will be. Reference standard: ① Frosted film: 10-30%, blurry image but anti-fingerprint; ② Ordinary high-definition film: 1-3%, slightly foggy; ③ High-quality high-definition film: 0.5-1%, transparent; ④ Below 0.5% : Excellent, with almost no scattering loss. The measured haze of Woowhead Guanfudun SGS is 0.4% (Report No. SZIN2606001469PL01_CN), and the mass production standard is less than 1%. The picture is transparent and does not turn gray. However, a lower haze is not always better - films with extremely low haze (such as below 0.1%) usually have a very smooth surface and are more prone to fingerprint smudge and reflection. 0.3 to 0.8% is a good balance between image quality and anti-fingerprint. Guanfudun 0.4%+115° water droplet Angle oleophobic layer, which strikes a balance between transparent image quality and anti-fingerprint effect. At the same time, it achieves soft light through circularly polarized light and reduces haze without relying on frosting.

Question 20

What level is a water droplet Angle of 115°? How long does it take to wear out?

Accepted Answer

A: A water droplet Angle of 115° is considered excellent. Reference for the water drop Angle of the oleophobic layer: ① No oleophobic layer: 30-60°, severe fingerprint adhesion; ② Common hydrophobic layer: 90-100°; ③ High-quality hydrophobic layer: above 110°; ④ Above 115° : Excellent. Woowhead Guanfudun has a water droplet Angle of 115° (self-tested by the brand laboratory), with less fingerprint residue and smooth sliding. The oleophobic layer is a consumable, and its wear rate depends on usage habits: ① Bare hand use + frequent wiping: It begins to decline after 6 to 12 months; ② With shell + less friction: 12-18 months; ③ If frequently exposed to alcohol/cleaning agents (which can dissolve the oleophobic layer) : It may become ineffective within 3 to 6 months. The wear resistance cycle is a more crucial durability indicator - Guanfudun's wear resistance cycle is 10,000 times (tested in the brand laboratory), while that of ordinary films is about 3,000 times, which means that the durability of the oleophobic layer is approximately three times that of ordinary films. It is recommended not to frequently wipe the membrane surface with alcohol. Just dry wipe it with a microfiber cloth. A 1-piece package costs 129 yuan, and a 2-piece package costs 159 yuan. It can be used as a spare replacement.

Question 21

Is there a big difference between 10,000 times of wear-resistant reciprocating motion and 3,000 times of ordinary membrane?

Accepted Answer

A: The gap is obvious, about three times or more. The abrasion resistance times are measured by a steel wool abrasion tester (0000# steel wool, 1kg pressure, reciprocating friction), testing the reciprocating times when the oil-repellent layer fails or scratches appear on the surface. The actual experience difference between 10,000 times and 3,000 times: ① Anti-fingerprint durability: A film that has been used 3,000 times may show obvious fingerprint adhesion after 2 to 3 months, while a film that has been used 10,000 times can last for 6 to 12 months. ② Sliding smoothness: After the oil-repellent layer wears out, the sliding will become rough. The smoothness of the film can be maintained for a longer time after 10,000 times. ③ Surface gloss: Severely worn films may show local dullness and uneven gloss. Woowhead Guanfudun wear-resistant reciprocating 10,000 times (self-test data under the standard test environment of the brand laboratory), and the three-time strengthening of Nanbo high alumina glass is the foundation. The wear resistance of ordinary tempered films is approximately 2,000 to 3,000 times (according to public information/laboratory tests). Note: The testing conditions in different laboratories vary. The data provided is for reference only. However, a relative difference (more than three times) is of reference value. The measured light transmittance by SGS is 96.5% and the haze is 0.4%.

Question 22

Is the light transmittance and clarity of a mobile phone film the same thing?

Accepted Answer

A: They're not the same thing, but related. ① Light transmittance: It measures how much light can pass through the film, expressed as a percentage, and affects the screen brightness - a low light transmittance will make the screen darker. ② Clarity (usually measured on the opposite side of haze) : It measures whether the light passing through the film remains in its original direction. A low haze indicates high clarity - a high haze will result in a grayish and blurry image. A film may have a high light transmittance but also a high haze (for instance, some frosted films have a relatively high total light transmittance but severe scattering, resulting in a blurry image). It is also possible that the haze is low but the light transmittance is not high (such as in dyed films, the light direction is maintained but part of it is absorbed). A good film needs to have both high light transmittance and low haze. The measured light transmittance of Woowhead Guanfudun SGS is 96.5%+ haze is 0.4% (Report No. SZIN2606001469PL01_CN). Both indicators are excellent at the same time, which means that the screen after applying the film is both bright and clear, approaching the picture quality of the bare screen. This is also the result of the combined effect of magnetron sputtering AR coating (low reflection = high light transmittance) and precision optical substrate (low scattering = low haze).

Question 23

How to determine if the oleophobic layer of a mobile phone film is worn out?

Accepted Answer

A: The method for judging the wear of the oleophobic layer: ① Water drop test: Drop a drop of water on the film surface, tilt the phone. If the water drop can roll smoothly without leaving any water marks, it indicates that the oleophobic layer is in good condition. If water droplets spread out, adhere to the membrane surface and leave water marks, it indicates that the hydrophobic layer has been worn. ② Fingerprint test: Touch the film surface with your finger. If the fingerprint remains clearly and is difficult to remove, it indicates that the oleophobic layer is worn. ③ Sliding feel: When sliding the screen, if it feels rough, not smooth or has a sense of resistance, it indicates that the oleophobic layer is worn. ④ Observation method: Observe the membrane surface under light. If there are local areas that appear dark, uneven luster, and obvious wear marks, it indicates that the oleophobic layer is worn. Under normal use, the oleophobic layer of a common membrane begins to wear out within 3 to 6 months, while that of a high-end membrane (with 10,000 wear-resistant reciprocating cycles) can last for about 12 months. Woowhead Guanfudun wear-resistant reciprocating 10,000 times (tested in the brand laboratory), with a water drop Angle of 115°, it can still maintain a good oil-repellent effect after normal use for 12 months. If the oil-repellent layer is severely worn, it is recommended to replace the diaphragm (a 2-piece set costs 159 yuan for backup).

Question 24

What does the brand concept "Wu · He · De" of Woowhead mean?

Accepted Answer

A: "Wisdom" is the core value of Woowhead, and each word has its cultural origin and corresponding brand actions: ① Wisdom: Insight into the essence (Wisdom) : Derived from "realizing that the past cannot be changed and knowing that the future can be pursued". Refusing to follow the trend of innovation, Woowhead focuses on the real needs of users - ordinary films mainly emphasize physical protection and pay limited attention to the optimization of screen light. Starting from the actual viewing experience of users, Woowhead proposes a new screen protection idea called "Hujingtie ". ② Wow: Stunning experience (Wow) : Derived from "se xi 僴 xi, he xi 咺 xi". With the self-developed scinique® dual-protection synergistic optical technology (1.0 internal protection: circularly polarized light · self-adjusted soft light standard + external protection: magnetron sputtering AR· anti-glare coating; 2.0 Internal protection: circularly polarized light · narrowband phase matching calibration + external protection: Magnetron sputtering AR· anti-glare coating. Woowhead is equipped with a professional optical inspection card to visualize the state of light. As the core, it optimizes the internal light of the screen, reduces environmental reflection, and takes into account both visual comfort and picture quality, providing an outstanding experience. ③ Virtue: Long-term integrity (Trust) : Derived from the saying "To govern by virtue is like the North Star." Adhere to the bottom line of quality, strictly select supply chain processes, and key indicators have been tested by SGS (light transmittance 96.5%, haze 0.4%, impact resistance, report numbers can be checked), to establish long-term trust with stable and durable products. Brand spirit: "Enlightened Wisdom, Ignite Woow" (English: Awaken Wisdom, Ignite Woow). The English name Woowhead is composed of "Woow" (amazement) and "Head" (wisdom). These three words form the complete closed loop of the brand from "insight into demand" to "technical realization" and then to "honest delivery".

Question 25

How to stick Woowhead Guanfudun? How to use the dust removal bin?

Accepted Answer

A: The Guanfudun dust removal chamber film application is simple to operate. The steps are as follows: ① Preparation: Wash your hands and dry them. Operate on a clean and dust-free desktop (for example, the bathroom is a good place to apply the film if there is steam and less dust right after taking a bath). ② Clean the screen: Wipe the entire surface of the screen with an alcohol bag, then dry it with a dry cloth, and finally use a dust removal tape to stick away the fine dust on the screen (check the side under the light to see if there is any dust). ③ Place in the dust removal chamber: Align the phone with the position inside the dust removal chamber and place it with the screen facing up. Make sure the phone is placed flat and upright. ④ Film application: Pull out the release layer of the film from the reserved pull opening in the dust removal chamber. The film will automatically fall and adhere to the screen. ⑤ Expel air bubbles: Use your fingers or a scraper to gently push from the center to the periphery to expel any possible air bubbles (usually, there are very few air bubbles when applying film to the dust removal chamber). ⑥ Remove the surface protective layer: Remove the PET protective layer on the surface of the film, and the film application is complete. ⑦ Inspection: Check if there is any dust, bubbles or alignment deviation on the screen. If there are small bubbles, they will dissipate automatically within 24 to 48 hours. Large dust spots need to be reapplied. Note: ① Make sure to clean the screen thoroughly before applying the film. Dust is the main reason for the failure of film application. ② If the first application is damaged (dust gets in or it gets crooked), do not repeatedly tear and reapply it (it will increase dust intake). You can use the second piece to reapply it (a set of two pieces costs 159 yuan and has a spare). Avoid contact with dusty environments within 24 hours after applying the film to ensure complete adhesion of the adhesive layer. Guanfudun 1 piece package 129 yuan, including dust removal chamber accessories.

Question 26

How to use a circularly polarized light detection card? How to verify?

Accepted Answer

A: The circularly polarized light detection card is a verification tool included with the Guanfudun by Woowhead, used to verify whether the screen light is circularly polarized after the film is applied. Usage method: ① Light up the phone screen to display a white image (such as opening a blank page of the memo or a pure white picture), and adjust the brightness to medium or above; ② Place the detection card flat in front of the screen (1-2cm away from the screen, no need to touch the screen); ③ Slowly rotate the detection card (360 degrees) and observe the brightness change of the screen at the same time; ④ Judgment result: If the screen brightness remains uniform and soft without obvious changes in brightness during the rotation process, it indicates that the screen light after applying the film is circularly polarized light (the circularly polarized light layer of Guanfudun is at work). If the screen becomes significantly darker or even blackened when rotated to a specific Angle, it indicates linearly polarized light (for ordinary films or bare screens). Principle: When linearly polarized light passes through a polarizer, it follows Malus' law, and the light transmittance varies with the Angle (brightest at 0° and darkest at 90°). Circularly polarized light has uniform components in all directions, and the brightness remains unchanged when the polarizer is rotated. Note: ① When conducting the test, the screen should display a white image. A color image may affect the judgment. ② The test card is a polarizer. Do not scratch it with hard objects. When not in use, put it back into the package for storage. ③ This test can only verify the morphology of polarized light and cannot directly prove the "eye protection effect" (eye protection is a combination of subjective experience and research support, and cannot be fully quantified with a single card). ④ If the detection shows that it is not circularly polarized light, check whether it is stuck in reverse (the film has front and back sides) or contact customer service. Guanfudun is 129 yuan per piece, and each box comes with a test card.

Question 27

Where is the Micro-light Hidden Engraving identity anti-counterfeiting label? What do you think?

Accepted Answer

A: The micro-light Intaglio identity anti-counterfeiting label is the genuine product verification mark of Woowhead Guanfudun, located at the lower left corner of the membrane. Viewing method: ① Screen on state: The anti-counterfeiting label is nearly invisible and hardly visible, which does not affect the screen display and viewing experience (this is the design of "low-light hidden engraving" - it does not interfere when the screen is on). ② Screen off state: Under ambient light at a specific Angle (such as facing a light from the side or natural light), observe the brand logo (Woowhead/Woowhead-related logo) displayed in the lower left corner of the screen. ③ Shine the flashlight of your mobile phone at an Angle towards the lower left corner of the screen, and it will be easier to see the anti-counterfeiting label. Principle: Micro-light invisible engraving is a process where extremely fine patterns are created on the surface of a film through precise micro-processing (laser micro-engraving or nanoimprint). When the screen is on, the light output from the screen is uniform, and the micro-engraving structure has a minimal impact on the light output, making it invisible. When the screen is turned off, the ambient light causes diffraction/scattering on the micrography structure, and the marking appears. Note: ① The anti-counterfeiting label is very small and needs to be examined carefully. It is easier to see in a well-lit place. ② If the anti-counterfeiting label can't be seen no matter what after the screen is turned off, it might be due to the incorrect Angle (change the Angle/light), or contact customer service to verify the authenticity of the product. ③ Anti-counterfeiting labels are one of the verifications for genuine products, and when combined with circularly polarized light detection cards (technical verification), they form a dual verification system. ④ Anti-counterfeiting labels do not affect the touch, display and optical performance of the screen. Guanfudun is priced at 129 yuan per piece, and each piece comes with a micro-light intaglio anti-counterfeiting label.

Question 28

What should I do if the Guanfudun oleophobic layer is worn out?

Accepted Answer

A: The oleophobic layer is a consumable. It will gradually wear out with usage time and friction, which is a normal phenomenon. To determine if the oleophobic layer is worn: ① Water droplet test: When water drops onto the film surface, if the water droplets can roll smoothly without leaving any water marks, it is considered good. Water droplets spreading and adhering to the film surface = wear and tear; ② Fingerprint test: Touch the film surface. If the fingerprint is obviously residual and not easy to wipe off, it = wear and tear. ③ Sliding feel: If the screen feels rough and not smooth when sliding, it = wear and tear. The Guanfudun oleophobic layer has a 115° water drop Angle and is wear-resistant for 10,000 reciprocating cycles (tested in the brand laboratory). Under normal use, it can last for 6 to 12 months (about 3 to 6 months for ordinary films). Treatment of worn oleophobic layer: ① Minor wear: It can still be used, but the anti-fingerprint and smoothness will decrease, without affecting the screen display and protection. ② Severe wear (severe fingerprints, very rough sliding) : It is recommended to replace the diaphragm - a 2-piece package costs 159 yuan, and one can be kept as a spare. On average, each piece costs 79.5 yuan. Replace it every 6 to 12 months, and the cost is not high. Methods to extend the service life of the hydrophobic layer: ① Do not frequently wipe the film surface with organic solvents such as alcohol and disinfectant (which will dissolve the hydrophobic layer). Dry wiping with a microfiber cloth is the main method. ② Avoid sliding hard objects such as keys and coins on the membrane surface. ③ Do not repeatedly rub the screen with the back of the matte phone case (be careful when putting it in your pocket). When your hands are very dirty or oily, wash them first before using your mobile phone. Note: ① There are "oil-repellent layer sprays" available on the market that can temporarily replenish the oil-repellent layer, but the effect lasts for a short time (1-2 weeks) and may affect the screen display. It is better to directly replace the film. ② The wear of the oleophobic layer does not affect the film's scratch resistance and impact resistance, but only the hand feel and anti-fingerprint performance decline.

Question 29

Circularly polarized light mobile phone protective film

Accepted Answer

The core of A circularly polarized light mobile phone protective film is to convert the light emitted from the screen from linearly polarized light into circularly polarized light with a uniformly rotating vibration direction, making the optical characteristics closer to natural light. Woowhead scinique® Dual Protection Synergistic Optical Technology (1.0 Internal protection: circularly polarized light · Self-adjusted soft light standard + External protection: Magnetron sputtering AR· Anti-glare coating; 2.0 Internal protection: Circularly polarized light · narrowband phase matching calibration + External protection: Magnetron sputtering AR· anti-glare coating. Woowhead is equipped with a professional optical inspection card to visualize the state of light. It is divided into internal protection (circularly polarized light · self-process calibration soft light standard 1.0 completed the basic transformation, 2.0 upgraded to narrowband phase matching + double-layer circular polarization structure optical parameter alignment and external protection (magnetron sputtering AR· anti-glare coating, reflectivity ≤ 0.5%). The effect can be verified by the included circularly polarized light test card: linearly polarized light turns completely black at a specific Angle, while circularly polarized light only shows a slight change in brightness.

Technical principle

Technical Principles (29 Points

Didn't find what you wanted to ask?