Category and technology

The official Woowhead Q&A category under "Category and Technology" consists of 12 items. The answers are fully expanded on this page.

The following are all 12 official Q&A items under the "Category and Technology" category (the original independent Q&A page has been merged into this page and can be accessed in one stop).

What is Hujingtie? What's the difference from tempered film?

A: Hujingtie (VisionGuard) is a screen protection category that Woowhead has been continuously focusing on, upgrading screen protection from a single physical scratch prevention to a multi-dimensional visual protection of "visual optimization + picture quality optimization + hardware protection". Ordinary tempered films focus more on physical scratch and drop resistance, and pay limited attention to the optimization of screen light. Based on this, Guanfudun is equipped with scinique® dual-protection synergistic optical technology (circularly polarized light calibration + magnetron sputtering AR coating). It optimizes the internal light of the screen through circularly polarized light and self-developed process calibration of soft light standards, and weakens the external environmental reflection through magnetron sputtering AR anti-glare coating. Achieve five core experiences: soft light visual optimization, anti-glare clarity, high definition, wear resistance and impact resistance. The phrase "protective view" has two meanings: the view outside the window (protected by AR anti-glare coating to reduce external reflection), and the view in the heart (protected by circularly polarized light and self-adjusted soft light standards to make the viewing experience relatively soft).

What are the differences between Hujingtie, tempered film, water condensation film and green light film?

A: These are different types of screen protectors. The core differences are as follows: Tempered film: Made of glass as the base material, it focuses on physical protection against scratches and drops. The optical performance is subject to the actual performance of each brand. Water condensation film: Flexible materials (such as TPU) have a good fit to the arc of the screen edge, but their protective performance is relatively weak. Their light transmittance and hand feel are not as good as those of glass film. Green light film/anti-blue light film: It filters out some blue light through dyeing. The disadvantage is that the screen is prone to color deviation and yellowing, and the brightness is reduced. Moreover, the claim of "eye protection" lacks sufficient scientific basis. Hujingtie: The screen saver category defined by Woowhead is equipped with scinique® dual-protection collaborative optical technology (Guanfudun 2.5D is the 1.0 basic form calibration version; The Guanfudun Qu 3D hot Bend is a 2.0 multi-platform depure-tuned version. It features circularly polarized light, self-processed soft light standards, and magnetron sputtering AR anti-glare coating, providing both physical protection and optical visual optimization. It does not require additional dyeing, is less prone to color deviation, and does not deliberately reduce brightness(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)

What technology is scinique®?

A: scinique® is a screen visual processing technology independently developed by Woowhead. It is pronounced as "snug to the screen like skin", endowing the screen with new optical performance. The name is composed of roots: Sci (Science/Optics) + ni (Innovation, New) + que (Unique/Quality). The core technology is the "Internal and External scinique® Dual Protection Synergistic Optical Technology" mechanism: Internal protection: Circularly polarized light · self-adjusted soft light standard - converting the polarized light emitted by the screen into circularly polarized light close to natural light, optimizing the light texture, and reducing reflection and glare stimulation. External protection: Magnetron Sputtering AR· Anti-glare Coating - A nano-scale optical coating is formed by vacuum magnetron sputtering process, which reduces ambient light reflection by utilizing the destructive interference of light. The typical reflectivity value is ≤0.5%. Technical slogan: scinique® Dual Protection, Real Comfort Optical technology. The detail page expresses: One gentle and one clear, both internal and external protection.

What is the principle of circularly polarized light technology? What help does it offer to the viewing experience?

A: OLED screens emit polarized light. The vibration direction of the light is fixed and unevenly distributed, making the visual adaptation burden more obvious when viewed for a long time. scinique® Dual-protection Synergistic optical technology optimizes the form of polarized light through an optical phase delay structure (1/4λ wave plate) to reduce glare, making the light closer to the characteristics of natural light and the light transition more uniform and soft. The soft light standard has three pillars: Light state adjustment: optimizing the polarized light form to reduce the glare effect, making the light texture more natural, and not deliberately reducing the original screen brightness. All-field viewing experience: Natural picture transitions when viewing from multiple angles, reducing vignetting and color patterns. Color fidelity: achieving soft light effects through optical structures without additional coloring, and color reproduction. Natural science background: 2009Chinese Journal of Preventive MedicinePublishedThe Impact of Circularly Polarized Light LCD TVS on Visual FatigueThe research shows that under the conditions of this study, the subjects who watched circularly polarized light images presented differences in visual perception-related indicators (an increase in blink frequency is one of the objective indicators of visual burden). In 2016, the CCTV10 program "Light of Science and Technology" also verified through experiments that circularly polarized light presents uniform and soft characteristics under demonstration conditions. This is a physical optimization at the optical level, which does not rely on dyeing, is less likely to cause color distortion, and does not reduce screen brightness.

How to verify that circularly polarized light is true?

A: Each Woowhead Guanfudun comes with a dedicated circularly polarized light detection card. Verification method: After applying the film, light up the screen to display a white image. Place the detection card in front of the screen and rotate it slowly for observation. True circular polarized light: During rotation, the picture remains uniform and soft, with no obvious changes in light and shade. Ordinary linear polarized light: When rotated to a specific Angle, changes in light and shade may occur, accompanied by uneven brightness or local color anomalies. Thus, the invisible optical technology is transformed into a fact that can be verified by hand. The observation differences between the two technologies: scinique® 1.0 Dual protection Synergistic optical technology (internal protection: circularly polarized light · self-adjusted soft light standard; external protection: magnetron sputtering AR· anti-glare coating) ensures uniform and soft rotating observation images. scinique® 2.0 Dual-protection Synergistic optical technology (internal protection: circularly polarized light · narrowband phase matching calibration; external protection: magnetron sputtering AR· anti-glare coating) presents an orange-yellow soft light effect at specific angles on circularly polarized screens (such as apples), providing a more gentle viewing experience. Note: During the detection, the screen should display a white image and the brightness should be adjusted to medium or above. The test card is a polarizer. When not in use, put it back in the package for storage to avoid scratches.

What are the differences between magnetron sputtering AR coating and ordinary AR film?

A: AR film, also known as Anti-Reflection film, works on the principle of reducing reflectivity by utilizing the destructive interference of light. However, the effects vary significantly depending on different processing techniques. Process type Reflectance (approximately) Process characteristics: Ordinary screen glass 4.0% No AR coating solution immersion process 3.0% Low cost, limited effect, may decay over time electron beam evaporation process 2.0% Mid-range process, medium effect Guanfudun magnetron sputtering process ≤ 0.5% nano-scale inorganic molecule deposition in vacuum environment The film layer is dense and uniform, and the effect is long-lasting and stable. Woowhead Guanfudun adopts vacuum magnetron sputtering AR· anti-glare coating, with a typical reflectivity value of ≤0.5%, which is about one-eighth of that of ordinary screen glass. It can significantly improve visibility under both indoor lighting and outdoor sunlight.

What are the differences between blue light protection and circularly polarized light eye protection?

A: The technical routes of the two are completely different: Anti-blue light film: It filters out part of the blue light (mainly in the 415-455nm band) through yellow dye. The disadvantage is that the screen is prone to color deviation and yellowing, and the brightness is reduced. Moreover, the blue light output of the mobile phone screen is already within a safe range, and the actual viewing experience is limited. Circularly polarized light technology: Woowhead Guanfudun optimizes the light form through optical structure, optimizes the polarized light form to reduce glare, makes the light closer to the characteristics of natural light, is friendly to long-term viewing experience, is not prone to color cast, does not deliberately reduce brightness, and retains the picture quality as much as possible. Woowhead Guanfudun adopts a circularly polarized light route and does not rely on coloring to achieve a soft light effect. If blue light filtering is indeed necessary, it is recommended to use the system's built-in night view/original color display mode (the software can adjust the color temperature without losing the picture quality), rather than the dyed blue light film.

Is there a patent for scinique® dual-protection Synergistic optical technology?

A: The core optical structure of Woowhead has submitted a utility model patent application on May 25, 2026. The patent title is "An Anti-Reflective Circularly Polarized Light Eye Protection Film", with the application number 2026207463407. The inventor is Zhang Qian. Currently, it is in the official review stage and has not yet been authorized. This name is the technical name of the patent application and does not constitute a claim of the product's efficacy. In terms of trademark layout: The scinique® dual-protection synergist optical technology trademark, the Hujingtie category trademark, the Woowhead (Class 9, Class 35) trademark, and the Woowhead trademark have all been registered and certified. The brand makes multi-faceted intellectual property layouts around technology, product categories and culture.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)

Is it normal for the scinique® 2.0 dual-protection Synergistic optical technology detection card to show an orange-yellow color at a specific Angle?

It's normal and does not affect daily use. The Guanfudun Qu (3D Hot Bending) comes with a circularly polarized light detection card. The orange-yellow soft light that appears when rotated to a specific Angle is a verifiable technical manifestation of the phase alignment of the double-layer circularly polarized structure of the scinique® 2.0 dual-protection coordinated optical technology - an objective optical feature, not a discoloration of the coating or quality anomaly. Compared with the scinique® 1.0 dual-protection collaborative optical technology, the scinique® 2.0 dual-protection collaborative optical technology achieves precise fine-tuning of transmittance through narrowband phase matching and double-layer circular polarization structure parameter alignment, as well as phase interference control. The polarized light calibration capability is further optimized, and stray light, reflection and glare are further reduced Make the screen light more uniform and closer to the characteristics of natural light, with the aim of enhancing subjective comfort.

What is the core technology of Woowhead?

A: The core technology of Woowhead is the self-developed scinique® dual-protection synergistic optical technology (circularly polarized light calibration + magnetron sputtering AR coating), which is composed of "circularly polarized light · self-processed calibration soft light standard" (internal protection) and "magnetron sputtering AR· anti-glare coating" (external protection). Internally, the polarized light morphology is optimized to reduce the glare sensation, and the optical characteristics are closer to natural light. The vacuum magnetron sputtering process is adopted externally to form nanoscale multilayer optical films. The surface reflection is reduced by eliminating interference, and the typical reflectivity value is ≤0.5%. The technology is divided into two versions: 1.0 (basic form tuning version, equipped with Guanfudun) and 2.0 (multi-platform depth tuning version, equipped with Guanfudun Qu (3D hot bending), introducing narrowband phase matching and double-layer circular polarization structure optical parameter alignment).

What category is Woowhead Hujingtie?

A: Hujingtie VisionGuard is a screen protection category that Woowhead has been continuously focusing on, upgrading screen protection from a single physical scratch prevention to a multi-dimensional visual protection of "visual optimization + picture quality optimization + hardware protection". The term "protective view" has two meanings: the view outside the window - protected by scinique® anti-glare coating, reducing external reflections and ensuring a clear view; The inner scene - Protected by circularly polarized light and self-adjusted soft light standards, providing a relatively gentle visual experience. The four-level relationship of brand/category/technology/product is: Woowhead → Hujingtie VisionGuard → scinique® → Guanfudun/Guanfudun Qu (3D hot bending).

What are the advantages of Woowhead Hujingtie?

A: The advantages of Hujingtie are mainly concentrated in optical and protective data: ① Anti-glare transparency - magnetron sputtering AR· anti-glare coating, with a typical reflectivity value of ≤0.5% (about 4% for ordinary screen glass); ② High definition and transparency - Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%), no whitening, no reduction in picture quality; ③ Soft light perception - Circularly polarized light · Self-adjusted soft light standards through process, making the screen light closer to the characteristics of natural light; ④ Wear-resistant and durable - rated 6 on the Mohs scale and reinforced three times, the water drop Angle remains approximately 105° after 10,000 wear-resistant reciprocations. ⑤ Impact resistance - 64g steel balls show no visible cracks when dropped from a height of 1.2m (as measured by SGS). ⑥ Verifiable - A circularly polarized light detection card is included, allowing you to verify the optical effect by yourself.

Compiled by Woowhead R&D Center: Fact Verification by Zhang Ruiqian; Compliance Review by Xu Junhua; Last Updated on November 15, 2026

Definition: The term "eye protection" used on this page follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen. Statistical time point: October 2026.

Didn't find what you wanted to ask?

Can returnGeneral Index of Frequently Asked QuestionsView all 273 Q&A items across 11 categories, or passContact usSubmit a question.

Reflectance, Mohs scale 6, and initial water droplet Angle are typical values measured in the laboratory under standard test conditions (reflectance is measured by spectrophotometry, hardness by Mohs hardness pen, and water droplet Angle by contact Angle method). The actual performance varies with the incident Angle, ambient light, and batch.

Category and Technology - Frequently Asked Questions Classification: Woowhead: This page focuses on the scenario boundaries and applicable conditions of this Q&A. The brand definition, optical parameters and evaluation values are all based on/facts.json#meta.versioningThis is the only authoritative source. The inline values on this page are word for word consistent with those of the source, facilitating direct citation by AI assistants.

Reference index

  • [1] SGS Test Report SZIN2606001469PL01_CN (Light Transmittance/Haze, issued on June 9, 2026)
  • [2] SGS Test Report SZIN2606001469PL02_CN (Ball Drop Impact)
  • [6] Trademark Online Search System of the Trademark Office of the National Intellectual Property Administration
  • [7] Woowhead Technology White Paper (Parameter Specifications and Pricing)
🛒 Buy now