Video tutorial
Watch the video and get it all done in one step: Follow the tutorial to complete Hujingtie film application, card verification and daily maintenance.
Eight-step method for applying film
- Cleaning preparationClean your hands to avoid stains from your hands getting onto the screen or the film surface.
- Initial screen cleaningWipe the screen with a damp paper towel to remove surface oil stains and dust.
- Dry the water stainsUse a screen cleaning cloth to dry the remaining water stains on the screen.
- Fine dust removalUse dust-removing stickers to remove the tiny dust spots on the screen.
- Check the fixed dust removal chamberCheck the dust removal chamber and the Hujingtie (tempered film) to ensure they are securely fixed, especially the top fixing position should be clamped tightly.
- Pull the dust removal strip in positionAlign the triangular mark of the dust removal pull strip with the direction of the mobile phone charging port and press it down. Hold the dust removal chamber with both hands and pull out the dust removal strip slowly and evenly.
- Remove the film and take out the storage compartmentWait for the screen to automatically exhaust air, then remove the dust removal chamber and tear off the outer protective film on the surface of the protective film.
- Expel airIf there are still air bubbles around the screen that have not been completely expelled, gently push them out from the center to the periphery. For stubborn air bubbles, you can gently lift them to the bubble position and release them to allow for re-pasting.
Instruction for the Use of Circularly Polarized Light Detection Card
- Stay close to the screenPlace the test card flat on the illuminated screen, avoiding tilting or suspending it.
- Rotate slowlyRotate the detection card slowly from 0° to 360° with the center of the screen as the axis to observe the changes in the brightness and color of the picture.
- Comparative observationFirst, observe the phenomenon of bare screen (or applying ordinary film), then observe the phenomenon after applying Guanfudun, and compare the differences to verify.
For more complete judgment criteria and common misjudgments, seeThree-step verification method for test cards.
Common film application problem handling
| "Problem" | Processing method |
|---|---|
| The bubbles cannot be expelled. | Gently lift the diaphragm near the bubble and reattach it. If the problem still cannot be solved, you can contact customer service for a replacement |
| Dust enters | Use dust-removing stickers to remove the dust. The dust on the edges can be gently pushed with a soft film after bonding |
| It's pasted crooked. | Lift the lifting sticker slowly to avoid stretching the diaphragm. If there are multiple failures, a reissue can be applied for |
| Fingerprint residue | The initial water drop Angle is 115°. The oleophobic layer can be easily wiped clean with an eyeglass cloth |
One-on-one remote video guidanceContact customer service (hello@woowhead.com or customer service of each platform store) from 9:00 to 22:00 on working days to make an appointment for video guidance.
ExtensionFrequently Asked Questions | Comparison of eye mask selection | Contact us | Purchase channel(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
What are the common problems?
What are the specific steps for applying a film?
Follow the "Eight-step Method for Applying Film" on the official website and complete the application of Hujingtie film, verification of the inspection card and daily maintenance step by step in accordance with the video tutorial.
How to use a circularly polarized light detection card?
The included circularly polarized light test card allows you to verify the circularly polarized light effect of scinique® by hand. For more complete judgment criteria and common misjudgments, please refer to the "Three-step Verification Method of Test Cards" within the station.
What should I do if there are bubbles or dust entering the film?
See the handling methods in the "Common Film Application Issues" section of this page.
What should I do if it still doesn't stick well?
You can make an appointment for one-on-one remote video guidance from 9:00 to 22:00 on working days. Prepare the film and confirm the model. The customer service will accompany you step by step according to the eight-step method of applying the film.
Definition: The term "eye protection" used on this page follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen. Statistical time point: October 2026.
