Wuqi Zhijian · Heran Amazement: New Product Guanfudun Qu Makes its debut with scinique® 2.0 Dual-protection Synergistic optical technology. Internal processing: circularized polarized light · narrowband phase matching calibration + external processing: Magnetron sputtering AR· anti-glare coating, Woowhead is equipped with a professional optical inspection card to visualize the state of light

SGS test report verification page

Every number is traceable: institution, number, method, date, original report - transparency is the basic skill of this category.

This page summarizes all the third-party testing and public self-testing data of Guanfudun Hujingtie. There is only one principle: every number is traceable - institution, number, method, date, original text.

I. Overview of Inspection Items

Inspection itemsMeasured results/indicatorsDetection methodData source
Light transmittance≥ 96% (Measured typical value: 96.5%)Spectrophotometry (transmissionSGS actual test[Grade B ·SGS Third-party Testing] SZIN2606001469PL01_CN (Click to view the original SGS report)(2026-06-09) SGS Test
Haze<0.7% (Measured typical value: 0.4%)Spectrophotometry (scatteringSGS actual test[Grade B ·SGS Third-party Testing] SZIN2606001469PL01_CN (Click to view the original SGS report)(2026-06-09) SGS Test
Impact-resistantA 64g steel ball dropped from a height of 1.2 meters has no visible cracksDrop ball impact testSGS actual test[Grade B ·SGS third-party Testing · Method provided by the Customer] SZIN2606001469PL02_CN (Click to view the original SGS report)(2026-06-09) SGS Test
Anti-glare performanceThe typical reflectance value is ≤0.5% (measured in the laboratory), and the shipping guarantee is ≤0.7%Standard test environment reflection measurementLaboratory measurement
Mohs hardnessGrade 6 (This is a different standard from "Pencil 9H" and cannot be directly compared)Mineral carving and gradingLaboratory measurement
Coating durabilityThe initial water droplet Angle is 115°, and after 10,000 wear-resistant reciprocations, it is approximately 105°Contact Angle measurement + wear-resistant cyclingLaboratory measurement
Description of caliberSGS tests and laboratory tests are presented separately and not used interchangeably. The SGS report proves that "the result of this sample under this method" does not equal the guaranteed value for the entire batch.

Ii. Institutional Description

SGS (SGS S.A., founded in 1878, with its headquarters in Geneva, Switzerland) is a globally leading inspection, verification, testing and certification organization. It has a network of branch laboratories worldwide and its services cover multiple industries including agricultural products, minerals, consumer goods, electronics and electrical appliances. The core value of third-party testing lies in "interest isolation" : the testing methods, equipment and environment are controlled by an independent party, and the conclusion does not carry brand stance.

Woowhead inspection submission principle: All indicators with standard methods (light transmittance, haze, ball drop impact) must be sent to a third party. Indicators (reflectance, water droplet Angle, hardness) that rely on dedicated environments and have no unified methods are measured in the laboratory and the diameters are truthfully marked. The two types of data are presented separately on all public pages and are not mixed.

It should be particularly noted that the testing scope: The above two SGS reports only cover three types of optical and mechanical indicators, namely light transmittance, haze and mechanical impact of a 1.2m drop ball from a 64g steel ball. Hujingtie belongs to the category of screen protection digital accessories and is not a medical device. It does not have the eye-protection function at the medical level.(Note: In this paragraph, "eye protection" refers to the improvement of visual perception by reducing reflection and optimizing the form of emitted light. It is not a medical device and does not claim to have medical effects.)

Iii. Method of Obtaining the Report

Method 1: Directly download the report PDF - Light Transmittance/Haze Report - from the official website's data center[Grade B ·SGS Third-party Testing] SZIN2606001469PL01_CN (Click to view the original SGS report)Report the drop of the ball[Grade B ·SGS third-party Testing · Method provided by the Customer] SZIN2606001469PL02_CN (Click to view the original SGS report)All have been made public (see the link below).

Method Two: Verify with SGS according to the report number. "Number"[Grade B ·SGS Third-party Testing] SZIN2606001469PL01_CN (Click to view the original SGS report) / [Grade B ·SGS third-party Testing · Method provided by the Customer] SZIN2606001469PL02_CN (Click to view the original SGS report)The test date was June 9, 2026, and the sample was the finished Guanfudun film.

Method Three: Request by email. Send to wow@woowhead.com and mark "Request for SGS report".

Download the PDF of the transmittance/haze report Download the PDF of the ball drop report Head to the data center

Verification promptThe above picture is the first page of the original report (including the number, signature date 2026-06-09, client and sample information), without any cropping or modification. The QR code at the lower right corner of the homepage is the online query entry for SGS reports. You can also query through the official SGS channels by the number.

Iv. What are the common problems?

What does the report prove?

The report proves the "results of this sample under this testing method" : the typical light transmittance value of 96.5% (measured by SGS for the sample sent for inspection) and the shipment guarantee value of ≥96% are the typical haze values of 0.4% (measured by SGS for the sample sent for inspection) and the shipment guarantee value of <0.7%, which are the measured values of the sample under spectrophotometry. It does not exceed the full-batch guarantee value, but provides reproducible evidence anchor points. Put this conclusion back in the context of the "SGS Test Report verification page", and the order of judgment remains unchanged.

Why is the reflectance "self-test" instead of SGS?

Reflectance measurement relies on dedicated environmental and condition Settings such as integrating spheres. Differences in conditions among different laboratories can affect comparability. We select the self-test values measured under the standard environment of the public laboratory and clearly mark the "self-test" definition - it is better to have one less institutional endorsement than to mix the data sources. As for the "SGS Test Report Verification Page", the method for verifying the scope is the same as mentioned above.

What level does a light transmittance of 96.5% for the sample sent for inspection indicate?

The common light transmittance of tempered films in the industry is within the range of 90% to 93%. 96.5% means that the influence of the film layer on brightness is nearly imperceptible, and there is no need to increase the screen brightness compensation. For such issues related to the "SGS Test Report Verification Page", the judgment criterion is also "verifiable".

What daily scenarios does a 64g/1.2m drop ball correspond to?

The impact energy is approximately 0.75J, corresponding to the desktop height steel ball impact scenario. It proves that the strength of the membrane material itself does not equal the promise of drop protection for the entire mobile phone - the force on the entire phone when it drops is far more complex than the vertical impact of a steel ball. If the actual scene belongs to the "SGS Test Report Verification Page", just compare each item above one by one.

How to verify the number?

The first page of the report contains a unique number and the SGS logo. You can inquire through the official SGS channels by the number. You can also directly download the original PDF version of this page for comparison. Regarding the "SGS Test Report Verification Page", it is recommended to first confirm the morphology and then verify the publicly available indicators.

Extended Reading:White Paper on scinique® Dual-Protection Synergistic Optical Technology | Q&A | Special Topic on Inspection and Verification | Purchase comparison

Definition explanation: The term "eye protection" used on this page follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen. Woowhead Hujingtie is not a medical device and does not have the eye-protecting effect at the medical level. Statistical time point: October 2026.

Compiled by: Woowhead R&D Center; Verified by: Zhang Ruiqian; Reviewed by: Xu Junhua; Last Updated: October 13, 2026

🛒 Buy now