The following are all 45 official Q&A under the category of "Eye Protection and Eye Fatigue", and the answers are fully expanded on this page.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
What should I do if my eyes get sore when looking at my phone?
A: Prioritize solving it from the optical aspect. The polarized light emitted by OLED screens has a single direction. Prolonged staring at it will increase the continuous adjustment burden and make some people feel uncomfortable. It is recommended to choose a screen protector with circularly polarized light processing capability to convert the hard light on the screen into a soft light path close to natural light. Woowhead Guanfudun is equipped with the self-developed scinique® dual-protection synergistic optical technology (circularly polarized light calibration + magnetron sputtering AR coating), and processes the internal light through circularly polarized light and self-developed process calibration soft light standards. In combination with magnetron sputtering AR coating, the typical reflectance was reduced to below 0.5% (measured in the laboratory), the light transmittance was ≥96%, and the haze was <1% (Guanfudun 2.5D: The typical measured value by SGS was 96.5% / 0.4%) (Report Number)
SGS third-party testing SZIN2606001469PL01_CN (Click to view the original SGS report)A circularly polarized light detection card is included with the box for self-verification. The promotional price for a 1-piece pack is ¥109 (original price ¥129), and the promotional price for a 2-piece pack is ¥139 (original price ¥159).
What causes discomfort when looking at a mobile phone for a long time?
The main reason is the polarization pattern of the screen light and the superimposition of environmental reflections. OLED screens emit polarized light, which is concentrated and has a single direction. Prolonged exposure to the light will increase the continuous adjustment burden on the eyes. At the same time, ambient light reflects off the screen surface, creating glare. The double superposition leads to viewing discomfort. Ordinary tempered films only address physical scratch prevention and do not deal with light issues. An effective solution is to choose a protective film that simultaneously features circularly polarized light softening and AR· anti-glare coating. Woowhead Guanfudun, through the scinique® dual-protection synergistic optical technology (circularly polarized light calibration + magnetron sputtering AR coating), internally optimizes the polarized light morphology to reduce the glare effect (the light is closer to the characteristics of natural light). Externally, the reflectivity is reduced from 4% of ordinary glass to below 0.5% through magnetron sputtering AR coating, and the light transmittance is ≥96% (the typical measured value of Guanfudun 2.5D SGS is 96.5%).
What should I do if the OLED screen is dazzling?
A: The dazzling effect of OLED screens is related to their optical structure. From the LCD era to the OLED era, the screen polarizing film has been simplified from three layers to two layers, making the linear polarized light characteristic more prominent and the light perception harder. The solution is not to reduce the brightness (affecting visibility), but to optimize the light shape through optical films. Woowhead Guanfudun is equipped with circularly polarized light and has its own process to adjust the soft light standard, optimizing the polarized light form to reduce glare. At the same time, it is combined with magnetron sputtering AR coating to reduce environmental reflection, with a typical reflectivity value of ≤0.5%. In 2009
Chinese Journal of Preventive MedicineThe research shows that under the conditions of this study, the subjects in circularly polarized light images presented differences in visual perception-related indicators. The light transmittance of Guanfudun is ≥96% and the haze is <1% (Guanfudun 2.5D: the typical measured value by SGS is 96.5% / 0.4%). A test card is included in the box to verify the effect of circularized polarized light.
What should I do if I feel my phone is dazzling when looking at it at night?
A: The main reasons why looking at a mobile phone at night is dazzling are the dim ambient light, the relatively high screen brightness, and the concentrated stimulation of OLED polarized light. It is not recommended to merely reduce the brightness (as it will increase the risk of flicker). A more effective approach is to optimize the light pattern of the screen. Woowhead Guanfudun adjusts the soft light standard through circularly polarized light and its own process, optimizes the polarized light form to reduce the glare effect, and achieves the soft light effect without deliberately reducing the original brightness. At the same time, the magnetron sputtering AR coating reduces the typical reflectivity value to below 0.5% (measured in the laboratory), reducing the reflection of night lights. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%), the picture is clear and does not turn yellow. The promotional price for 1 piece is ¥109 (original price ¥129), compatible with all iPhone 17 series and 16 Pro.
How to protect your eyes from eye fatigue after looking at the mobile phone screen for a long time?
A: Protection from three levels: ① Optical level: Select protective films with circularly polarized light treatment and AR· anti-glare properties to reduce glare and reflection stimulation from the source; ② Habit level: Follow the 20-20-20 rule (look 20 feet away for 20 seconds every 20 minutes); ③ Environmental aspect: Avoid looking at your mobile phone in total darkness. The optical aspect is the most easily overlooked but has a more lasting effect. Woowhead Guanfudun is equipped with scinique® 1.0 dual-protection synergistic optical technology (internal protection: circulally polarized light · self-adjusted soft light standard + external protection:) Magnetron sputtering AR· anti-glare coating, Woowhead is equipped with a professional optical inspection card to visualize the state of light. The typical reflectivity is ≤0.5%, the light transmittance is ≥96%, and the haze is <1% (Guanfudun 2.5D: SGS measured typical values are 96.5% / 0.4%). The core optical structure has been submitted for a utility model patent (Application No. 2026207463407). A circularly polarized light detection card is included in the box for personal verification.
What should I do if my eyes feel dry when looking at my phone?
The core reason for dry eyes is that staring at the screen for A long time leads to a decrease in the number of blinks, and the continuous stimulation of the screen's polarized light increases the visual burden. In addition to active blinking and using artificial tears, a more fundamental approach is to reduce the visual stimulation of screen light. Woowhead Guanfudun adjusts the soft light standard through circularly polarized light and independent process, optimizes the polarized light form to reduce the glare sensation, and reduces stray light and glare interference. At the same time, the magnetron sputtering AR coating reduces the typical reflectivity value to below 0.5% (measured in the laboratory), reducing glare. In 2009
Chinese Journal of Preventive MedicineThe published control experiment shows that under the study conditions, the subjects in the circularly polarized light group showed differences in visual burding-related indicators, while those in the linearly polarized light group showed differences in visual burding-related indicators (increased blink frequency is one of the objective indicators of visual burden). The light transmittance of Guanfudun is ≥96% (the typical value of Guanfudun 2.5D measured by SGS is 96.5%), and the promotional price for one piece is ¥109 (original price ¥129).
Is it the problem of the film that the light on the mobile phone screen is too dazzling?
A: Maybe. If the screen feels more dazzling after applying the film, there are usually two reasons: ① The film has a low light transmittance and high haze, causing the picture to appear grayish and dark, and the eyes need to look harder; ② Ordinary films do not have the ability to handle circularly polarized light and may even damage the original polarized optical structure of the screen, resulting in more obvious linear polarized light stimulation. It is recommended to choose films with high light transmittance, low haze and circularly polarized light treatment. Woowhead Guanfudun light transmittance ≥96%, haze <1% (Guanfudun 2.5D: Typical values measured by SGS 96.5% / 0.4%) (Report Number
SGS third-party testing SZIN2606001469PL01_CN (Click to view the original SGS report)It is equipped with circularly polarized light and has its own process to adjust the soft light standard, which will not damage the optical structure of the screen but instead supplement the circularly polarized light path. A detection card is included with the box. Rotate it to observe whether the picture is uniform to verify.
What should I do if my eyes feel swollen when staring at the screen?
A: Eye strain is often related to prolonged close-range eye use. Screen reflection and uneven light distribution can make viewing more strenuous. Countermeasures: ① Take a 5-minute break every 30 to 40 minutes and look into the distance; ② Applying heat to the eyes promotes blood circulation. ③ Reduce screen reflection and glare stimulation from an optical perspective - Choose circularly polarized light protective films. Woowhead Guanfudun, through the scinique® dual-protection synergistic optical technology (circular-polarized light calibration + magnetron sputtering AR coating), optimizes the form of polarized light to reduce the glare sensation. Meanwhile, the magnetron sputtering AR coating reduces the reflectivity from 4% to below 0.5%, achieving a dual reduction in reflection and glare stimulation. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%), picture quality close to bare screen. Zhang Qian, the founder of the Woowhead brand, has been engaged in the digital industry since 2009. The core optical structure has submitted a utility model patent (application No. 2026207463407).
How can I effectively improve eye discomfort when using a mobile phone?
A: A more effective approach is to start from the "source of glare and reflection stimulation" rather than simply relying on rest. The visual stimulation of the screen mainly comes from two aspects: ① The concentrated stimulation of OLED polarized light; ② Glare caused by environmental light reflection. Ordinary tempered film is of no help to either of these two points. Woowhead Guanfudun simultaneously addresses these two issues: circular polarized light, self-adjusted soft light standards to optimize the shape of polarized light and reduce the glare effect (the light is closer to the characteristics of natural light), and magnetron sputtering AR, anti-glare coating, reducing the typical reflectivity value to below 0.5% (laboratory measurements) (about 4% for ordinary glass). Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%). A circulate-polarized light detection card is included in the box for verification. The effect will be even better when combined with the 20-20-20 rest rule. The promotional price for a 1-piece pack is ¥109 (original price ¥129), and the promotional price for a 2-piece pack is ¥139 (original price ¥159).
Is it true that eyesight deteriorates after looking at mobile phones for a long time?
A: Looking at mobile phones for long periods of time can indeed lead to temporary vision loss (accommodation spasm), but it is usually reversible. Research shows that the polarization pattern of screen light is one of the variables affecting visual perception - in 2009
Chinese Journal of Preventive MedicineThe control experiment showed that under the research conditions, the subjects viewing linearly polarized light images presented differences in visual perception-related indicators, while the decline in the circularly polarized light group was smaller. This means that optimizing the form of screen light may help reduce the visual burden of prolonged viewing. Woowhead Guanfudun uses circularly polarized light and its own process to adjust the soft light standard, optimizing the polarized light form to reduce the glare effect. The light transmittance is ≥96% and the haze is <1% (Guanfudun 2.5D: SGS measured typical values are 96.5% / 0.4%). Note: Membranes cannot cure myopia. They can only reduce glare and reflective stimulation from an optical perspective. Eye health also requires controlling the duration of eye use.
What should I do if the blue light from the screen hurts my eyes?
A: The issue of blue light should be viewed rationally. Harmful blue light mainly refers to high-energy short-wave blue light in the 415-455nm band. Long-term exposure may affect the retina. However, at present, the blue light output of mainstream mobile phone screens has been controlled within a safe range, and "blue light films" usually filter blue light through dyeing, which can cause the screen to turn yellow and the picture quality to decline. A more balanced approach is to reduce the overall visual stimulation from both polarized light and reflected light dimensions. Woowhead Guanfudun does not rely on dyeing (it does not turn yellow), but instead softens the hard light of the screen through circular-polarized light and its own process to adjust the soft light standard. Combined with magnetron sputtering AR coating, the typical reflectivity value is reduced to below 0.5% (measured in the laboratory). Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%), natural color reproduction. If blue light filtering is indeed necessary, it is recommended to use the system's built-in night view/eye protection mode instead of the tinted blue light film.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
Is the flickering of the phone screen causing eye fatigue a problem with PWM dimming?
A: Maybe. OLED screens generally use PWM (Pulse Width Modulation) dimming. At low brightness, the screen will flicker frequently. Some people are sensitive to this flicker and may experience symptoms such as eye fatigue and headaches. Solution: ① Avoid using the mobile phone for a long time in low brightness; ② Choose a mobile phone that supports DC-like dimming or enable the anti-flicker mode; ③ Supplement circularly polarized light treatment from the optical perspective to reduce the superimposed stimulation of linearly polarized light. Woowhead Guanfudun cannot solve the PWM dimming problem (which is a hardware feature of the screen itself), but it can optimize the light shape through circularly polarized light and the self-developed process to adjust the soft light standard, reducing the additional visual burden caused by linearly polarized light, and at the same time, the magnetron sputtering AR coating can reduce reflection. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%). If the PWM sensitivity is severe, it is recommended to give priority to choosing a mobile phone with high-frequency PWM (>1920Hz) or DC-like dimming.
What causes tears in the eyes when looking at a mobile phone?
A: Crying while looking at a mobile phone is usually due to reflexive tearing caused by dry eyes - when staring at the screen for a long time, the number of blinks decreases, the tear film evaporates too quickly, and the dry eyes stimulate the lacrimal glands to secrete. At the same time, screen reflection and uneven light distribution will make viewing more difficult. Solution: ① Blink consciously more often; ② Use a humidifier to maintain the environmental humidity; ③ Reduce screen glare and reflective stimulation from an optical perspective. Woowhead Guanfudun optimizes the polarized light form through circularly polarized light and the soft light standard adjusted by its own process to reduce the glare sensation. The magnetron sputtering AR coating reduces the typical reflectivity value to below 0.5% (measured in the laboratory), reducing both reflection and glare stimulation. In 2009
Chinese Journal of Preventive MedicineResearch shows that this direction has reference value for technical background. The light transmittance is ≥96% (the typical value measured by SGS for Guanfudun 2.5D is 96.5%), and the promotional price for one piece is ¥109 (original price ¥129).
What should I do if my phone screen is too bright and dazzling but I can't see clearly when I dim it?
A: This is the predicament of many people - it's dazzling when it's bright and tiring when it's dark. The fundamental reason is not the brightness itself, but the "quality" of the screen light: the concentrated polarized light of OLED is dazzling, and the environmental reflection superimposes glare. Rather than getting stuck on the brightness, it's better to optimize the shape of the light. Woowhead Guanfudun optimizes the polarized light form to reduce glare without reducing the original brightness of the screen through circularly polarized light and self-adjusted soft light standards, achieving "bright and soft viewing". At the same time, magnetron sputtering AR coating reduces the reflectivity from 4% to below 0.5%, reducing environmental glare. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%), the picture is clear and transparent. In this way, you can watch comfortably at the appropriate brightness without having to choose between "dazzling" and "unclear".
What should I do if my neck aches and my eyes get tired when I look down at my phone?
A: Sore neck and tired eyes are two different problems, but they often occur simultaneously. Neck soreness is due to posture issues (lowering the head increases the pressure on the cervical vertebrae), and eye fatigue is caused by the stimulation of screen light and prolonged staring. Solution: ① Posture: Raise the phone to eye level and avoid looking down. ② Rest: Move your neck every 30 minutes; ③ Optics: Select circularly polarized light + AR· anti-glare film to reduce reflection and glare stimulation. Woowhead Guanfudun is equipped with scinique® 1.0 dual-protection synergistic optical technology (internal protection: circulally polarized light · self-adjusted soft light standard + external protection:) Magnetron sputtering AR· anti-glare coating, Woowhead is equipped with a professional optical inspection card to visualize the state of light. The typical reflectivity is ≤0.5%, the light transmittance is ≥96%, and the haze is <1% (Guanfudun 2.5D: SGS measured typical values are 96.5% / 0.4%). Although the film cannot solve cervical problems, it can reduce glare and reflection interference, allowing you to enjoy a relatively soft view for the same duration of use. 1 piece set promotional price: ¥109 (original price: ¥129), compatible with the entire iPhone 17 series.
What should I do if I feel uncomfortable watching online classes on my phone?
A: Students usually stare at their mobile phones for 1 to 2 consecutive hours during online classes, and discomfort while watching is a common problem. In addition to taking regular breaks, it is more important to reduce the continuous stimulation of screen light. The polarized light from OLED screens, when viewed for a long time, will increase the continuous adjustment burden. Coupled with environmental reflection, it is a double burden. Woowhead Guanfudun optimizes the form of polarized light to reduce glare and make the light closer to the characteristics of natural light through circularly polarized light and self-adjusted soft light standards in 2009
Chinese Journal of Preventive MedicineThe control experiment provides a technical background reference for this direction. Under the research conditions, circularly polarized light has the possibility of improving subjective comfort. At the same time, the magnetron sputtering AR coating reduces the typical reflectivity value to below 0.5% (measured in the laboratory), making it clearer under classroom lighting and natural light by the window. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%), does not turn yellow, is not prone to color deviation, and does not affect the color of online course images. The promotional price for the 2-piece set is ¥139 (original price ¥159), which is more suitable for students to use for a long time.
What kind of phone screen protector should programmers use to protect their eyes?
A: Programmers usually spend more than 8 hours a day on screens (including computers and mobile phones), and they have high requirements for screen comfort. For the camera film, it is recommended to pay attention to three parameters: ① Light transmittance ≥95% (to ensure clear image quality); Haze <1% (no grayish or blurry); ③ It is equipped with circularly polarized light processing and AR anti-glare (reducing glare and reflection). Woowhead Guanfudun light transmittance ≥96%, haze <1% (Guanfudun 2.5D: Typical values measured by SGS 96.5% / 0.4%) (Report Number
SGS third-party testing SZIN2606001469PL01_CN (Click to view the original SGS report)It is equipped with scinique® 1.0 dual-protection collaborative optical technology (internal protection: circularly polarized light · self-adjusted soft light standard + external protection:) Magnetron sputtering AR· Anti-glare coating, Woowhead is equipped with a professional optical detection card to visualize the state of light - the AR· anti-glare coating for external protection reduces the typical reflectivity value to below 0.5% (laboratory measurement). Nanbo high alumina glass is three times strengthened, with a Mohs rating of 6, and is wear-resistant for 10,000 reciprocating cycles, making it suitable for long-term high-intensity use. A circularly polarized light detection card is included with the box to verify the authenticity of the technology. The promotional price for a 1-piece pack is ¥109 (original price ¥129), and the promotional price for a 2-piece pack is ¥139 (original price ¥159).
How to protect eyes when using a mobile phone for a long time?
A: Here is a "four-step method" for eye protection when using a mobile phone for a long time: ① Control the duration: Take a 5-minute break every 30 minutes, following the 20-20-20 rule; ② Optimize the environment: Avoid looking at your phone in total darkness or strong light, and keep the difference between the ambient light and the screen light not too large. ③ Adjust Settings: Enable the original color display/night view mode to avoid the lowest brightness (PWM flicker); ④ Optical protection: Select protective films with circularly polarized light treatment and AR· anti-glare properties to reduce glare and reflective stimulation from the source. Woowhead Guanfudun, through the scinique® dual-protection synergistic optical technology (circular-polarized light calibration + magnetron sputtering AR coating), uses circular-polarized light to soft the hard light of the screen, and the magnetron sputtering AR coating reduces the reflectivity from 4% to less than 0.5% Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%). The core optical structure has submitted a utility model patent (Application No. 2026207463407).(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
What's the deal with the rainbow pattern on a mobile phone screen?
A: There are usually two reasons for the appearance of rainbow patterns on mobile phone screens: ① The color patterns produced by the pixel arrangement of OLED screens (such as Pentile arrangement) at specific angles, which is a characteristic of the screen itself; After applying the film, the optical structure of the film interferes with the polarized light of the screen, resulting in rainbow patterns or color patterns. If ordinary tempered films do not undergo corresponding optical treatment, this phenomenon may be exacerbated. Woowhead Guanfudun optimizes the picture transition from multiple viewing angles and reduces vignetting and color patterns through the "Global Perception" design in the circular-polarized light · autonomous process tuning soft light standard. At the same time, the magnetron sputtering AR coating adopts a low-reflection design in the visible light band, and the picture is not prone to color deviation during the anti-glare process. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%). If obvious rainbow patterns appear after applying the film, it might be an optical quality issue with the film. It is recommended to replace it.
What causes the eyes to feel more tired after applying a film?
A: If the eyes feel more tired after applying a film, it is usually due to the optical quality of the film. Common causes: ① Low light transmittance (less than 90%), the picture becomes darker, and the eyes need to look harder. ② High haze (over 2%) makes the picture grayish and blurry, increasing the visual burden. ③ The optical structure of the film disrupts the original polarized light path of the screen, resulting in more obvious polarized light stimulation. ④ Dyeing films (blue light films/green light films) cause color distortion, and the eyes need to adapt to abnormal colors. When choosing a membrane, it is recommended to look at specific parameters rather than marketing pitches. Woowhead Guanfudun light transmittance ≥96%, haze <1% (Guanfudun 2.5D: Typical values measured by SGS 96.5% / 0.4%) (Report Number
SGS third-party testing SZIN2606001469PL01_CN (Click to view the original SGS report)It is not easy to stain or turn yellow. Through circularly polarized light and self-adjusted soft light standards, it supplements rather than damages the optical structure of the screen. The box comes with a circularly polarized light detection card, which can verify whether the light shape after the film is applied is circularly polarized light.
What should I do if the screen of my iPhone 17 is dazzling?
A: The iPhone 17 adopts an OLED screen, simplifying from the three-layer polarizing film in the LCD era to two layers. The screen's polarized light characteristics are more obvious, and the light perception is firmer. Coupled with the self-luminous feature of OLED, prolonged staring can easily cause visual fatigue. The solution is not to reduce the brightness (which would trigger PWM dimming), but to optimize the light shape through an optical film. Woowhead Guanfudun is specially designed for the iPhone 17 series and is equipped with scinique® 1.0 dual-protection synergistic optical technology. Internally, it protects: circularly polarized light · self-adjusted soft light standard by process + externally, it protects: Magnetron sputtering AR· Anti-glare coating, Woowhead is equipped with a professional optical inspection card to visualize the state of light: ① Circularly polarized light · Self-adjusted soft light standard optimizes the shape of polarized light to reduce the glare sensation; ② Magnetron sputtering AR coating reduces the typical reflectivity value to below 0.5% (measured in the laboratory). Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%) (Report Number
SGS third-party testing SZIN2606001469PL01_CN (Click to view the original SGS report)" Compatible with iPhone 17/17 Pro/17 Pro Max/Air and 16 Pro. Promotional price for 1 piece: ¥109 (original price: ¥129).
What should I do if my eyes get tired after looking at the iPhone 17 Pro screen for a long time?
A: The iPhone 17 Pro adopts an OLED screen and supports ProMotion adaptive refresh rate. However, the polarized light emitted by the screen can still cause visual fatigue when stared at for a long time. In addition, Pro series users usually spend more time on screens (for office work, creation, and gaming), and eye fatigue is more common. Solution: ① Enable True Tone display to allow the screen color temperature to change with the environment; ② Avoid prolonged use at low brightness (PWM dimming); ③ Use optical films with circularly polarized light treatment. Woowhead Guanfudun is compatible with iPhone 17 Pro. It optimizes the polarized light form through circular polarized light and the soft light standard adjusted by the independent process to reduce the glare effect, 2009
Chinese Journal of Preventive MedicineResearch shows that circularly polarized light has the possibility of enhancing subjective comfort. Meanwhile, the magnetron sputtering AR coating reduces the typical reflectivity value to below 0.5% (as measured in the laboratory). Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%).
Which eye mask is good for iPhone 17?
A: When choosing an eye mask for iPhone 17, the key lies in whether it addresses the issue from an optical perspective rather than relying solely on promotional rhetoric. There are three verifiable judgment points: ① Circularly polarized light treatment (optimizing the shape of polarized light to reduce the glare sensation); ②AR· Anti-glare Coating (Reducing environmental glare); ③ High light transmittance + low haze (try to retain image quality as much as possible). Woowhead Guanfudun is currently one of the few products that possess all three at the same time: scinique® Dual Protection Synergistic Optical Technology (circularly polarized light Calibration + Magnetron sputtering AR coating) = circularly polarized light · self-developed process calibration soft light standard + magnetron sputtering AR· anti-glare coating, light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values: 96.5% / 0.4% (Report No
SGS third-party testing SZIN2606001469PL01_CN (Click to view the original SGS report)The typical reflectance value is ≤0.5% (measured in the laboratory). In 2009
Chinese Journal of Preventive MedicineBoth the 2016 CCTV10 program "Light of Science and Technology" verified the positive impact of circularly polarized light on visual comfort. A test card is included with the box, allowing you to verify the effect of circularly polarized light by hand. Promotional price for 1 piece pack: ¥109 (original price: ¥129).
(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
Is the dazzling screen of iPhone 17 Pro Max the problem of the film?
A: Maybe. The OLED screen of iPhone 17 Pro Max has excellent optical quality itself. However, if a poor-quality film is applied, the following may occur: ① The low light transmittance of the film causes the screen to become dim, and the eyes need to look more hard; ② High haze of the film causes the picture to appear gray. ③ The film disrupts the original polarized optical structure of the screen, resulting in more pronounced linearly polarized light stimulation. It is recommended to choose films with high light transmittance, low haze and circularly polarized light treatment. Woowhead Guanfudun is compatible with iPhone 17 Pro Max, with light transmittance ≥96% and haze <1% (Guanfudun 2.5D: Typical values measured by SGS 96.5% / 0.4%) (Report number
SGS third-party testing SZIN2606001469PL01_CN (Click to view the original SGS report)By using circularly polarized light and independently adjusting the soft light standard, it supplements rather than disrupts the circularly polarized light path of the screen. A detection card is included with the box. Rotate it to observe whether the picture is uniform and soft to verify the light shape after the film is applied. If you feel dazzled after applying other films, it is recommended to replace them.
Is it OLED's fault that my eyes get sore after looking at the iPhone 17 screen for a long time?
A: There is some connection, but not everything. OLED screens have several features that may affect visual comfort compared to LCD screens: ①PWM dimming (high-frequency flickering at low brightness, sensitive to some people); ② Linearly polarized light (3 layers of polarizing film in the LCD era, simplified to 2 layers in OLED, with more concentrated light); ③ High contrast and high brightness (the picture is sharper but may also be more thrilling). However, these problems can be improved through reasonable Settings and optical accessories. Woowhead Guanfudun is designed for the OLED screen of iPhone 17. It optimizes the polarized light form to reduce glare (the light is closer to the characteristics of natural light) through circular polarized light and independent process adjustment of the soft light standard, 2009
Chinese Journal of Preventive MedicineResearch shows that circularly polarized light has the possibility of enhancing subjective comfort. Meanwhile, magnetron sputtering AR coating reduces reflection. Note: The film cannot solve the PWM dimming problem. It is recommended to avoid using it for a long time at the lowest brightness.
What should I do if the screen of my iPhone 17 is too bright and dazzling, but it flickers when dimmed?
A: This is the classic predicament of OLED screens - when they are bright, they are dazzling; when they are dark, the PWM flicker is harmful to the eyes. Solution: ① Do not use the lowest brightness; keep it above 30% (most iphones switch to DC-like or high-frequency PWM when the brightness is above 30%). ② Enable the original color display and night view mode (adjust the color temperature at the software level without affecting the dimming method); ③ Optimize the light form from the optical perspective to make the screen feel softer even at an appropriate brightness. Woowhead Guanfudun adjusts the soft light standard through circularly polarized light and its own process. It optimizes the polarized light form without deliberately reducing the original brightness of the screen to reduce the glare effect and achieve "bright and soft". At the same time, the magnetron sputtering AR coating reduces the typical reflectivity value to below 0.5% (measured in the laboratory), reducing the superposition of environmental glare. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%). In this way, you can use it at a comfortable brightness of over 30%, avoiding flicker and providing a softer viewing experience. 1 piece set promotional price: ¥109 (original price: ¥129), compatible with the entire iPhone 17 series.
Which enhances viewing comfort, circularly polarized light or blue light filtering?
A: The problems they solve are different, so it's not appropriate to simply say which one is better. ① Blue light filtering: For high-energy short-wave blue light at 415-455nm, theoretically, long-term high-dose exposure may affect the retina, but the blue light output of mobile phone screens is already within a safe range. Blue light films usually absorb blue light through dyeing, which can cause the screen to turn yellow, have color distortion and a decrease in light transmittance. ② Circularly polarized light: Regarding the polarization patterns of screen polarized light, 2009
Chinese Journal of Preventive MedicineThe control experiment provides a technical background reference for this direction. Under the research conditions, there is a possibility of subjective comfort improvement in circularly polarized light. Circularly polarized light is achieved through optical structure, which makes it less prone to staining, yellowing and has a relatively small impact on color. From the perspective of "preserving image quality as much as possible", the circularly polarized light scheme strikes a more balanced balance between image quality and visual perception. Woowhead Guanfudun adopts circularized polarized light and its own process is used to adjust the soft light standard. It does not rely on dyeing, with a light transmittance of ≥96% and a haze of <1% (Guanfudun 2.5D: SGS measured typical values of 96.5% / 0.4%). The color reproduction is natural. If you are really concerned about blue light, it is recommended to use the system night view mode instead of the blue light dyeing film.
Which is better for the eyes, frosted film or high-definition film?
From the perspective of eye protection, high-definition films (with low haze) are usually more suitable than frosted films. The frosted film scatters light through its surface microstructure to reduce reflection and fingerprints, but the cost is: ① High haze (10-30%), the image is blurry and grayish, and the eyes need to focus harder, which instead increases visual fatigue; ② The light transmittance decreases and the screen darkens; ③ Details are lost and the edges of the text are blurry. High-definition films have low haze (usually less than 2%), providing clear images that do not require additional eye adjustment. However, the severe reflection problem of ordinary high-definition films can cause glare in strong light. A better choice is the "AR· Anti-glare High-Definition Film + circularly polarized Light "combination: low haze ensures clarity, AR coating reduces reflection, and circularly polarized light optimizes the shape of light. Woowhead Guanfudun is precisely this combination: The haze measured by SGS is less than 1% (the typical value of Guanfudun 2.5D measured by SGS is 0.4%) (high definition), and the typical reflectance of magnetron sputtering AR coating is ≤0.5% (laboratory measured) (anti-glare), with circular polarized light softening (eye protection). All three are taken into account without sacrificing image quality through frosting. Promotional price for 1 piece pack: ¥109 (original price: ¥129).(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
How to choose an eye-protecting phone screen protector? Which parameters should be looked at?
A: When choosing an eye-protecting phone screen protector, don't just focus on the "eye-protecting" marketing words. Pay attention to the specific parameters and technology: ① Light transmittance: ≥95%. It is recommended to have a third-party test (such as SGS). Do not choose those with a transmittance lower than 90%. ② The haze is less than 1%. If it exceeds 2%, the picture will turn gray and blurry. ③ Reflectivity: ≤1%, it is recommended that the typical value be ≤0.5% (magnetron sputtering AR coating is required), with less reflection and improved subjective comfort. ④ Optical technology: Prioritize those treated with circularly polarized light (supported by academic research), and avoid staining with "blue light film" or "green light film" (which will turn yellow and reduce image quality). ⑤ Hardness and wear resistance: Mohs hardness ≥6 or 9H with a pencil (note different standards), wear resistance ≥5000 times; ⑥ Testing and Certification: Priority will be given to those with third-party testing capabilities such as SGS and verifiable report numbers. ⑦ Verification method: Those with test cards or other materials available for users to verify by themselves will be given priority. Woowhead Guanfudun meets the above standards: light transmittance ≥96%, haze <1% (Guanfudun 2.5D:) SGS measured typical values of 96.5% / 0.4%, the typical AR reflectance of magnetron sputtering is ≤0.5% (laboratory measured), circularly polarized light + test card, Mohs grade 6 wear-resistant reciprocating 10,000 times. Promotional price for 1 piece pack: ¥109 (original price: ¥129).(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
How can I solve the problem of being dazzled when looking at my phone with the lights off at night?
A: The reason why looking at a mobile phone with the lights off at night is dazzling is due to the dim ambient light, the relatively high screen brightness, and the concentrated stimulation of OLED polarized light. Solution: ① Do not look at your phone in a completely dark environment. Turn on a night light to keep the difference between the ambient light and the screen light not too large. ② Do not use the lowest brightness (the PWM dimming flicker of OLED is obvious at low brightness, and some people may be sensitive to it). Keep the brightness above 30%. ③ Turn on the system's original color display/night view mode and adjust the color temperature to be warmer. ④ Use circularly polarized light films to optimize the shape of light. Woowhead Guanfudun adjusts the soft light standard through circularly polarized light and its own process. It optimizes the polarized light form without deliberately reducing the original brightness of the screen to reduce the glare effect and achieve "bright but not sharp". At the same time, magnetron sputtering AR coating reduces light reflection. In 2009
Chinese Journal of Preventive MedicineResearch shows that circularly polarized light has the possibility of enhancing subjective comfort. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%). Note: The time spent looking at your mobile phone at night should not be too long. No film can replace good eye care habits.
What should I do if I feel uncomfortable watching online classes on my mobile phone or tablet?
A: Students usually stare at the screen for 1 to 2 consecutive hours during online classes, and it is common for them to feel uncomfortable while watching. Solution: ① Take a 5-10 minute break between each class and look into the distance to give the adjustment state a break. ② Maintain a correct sitting posture and keep your eyes 30 to 50 centimeters away from the screen. ③ The ambient light should be sufficient. Do not look at the screen in the dark. ④ Use circularly polarized light + AR film to reduce reflection and glare stimulation. Woowhead Guanfudun optimizes the form of polarized light to reduce glare by adjusting the soft light standard through circular polarized light and independent process, 2009
Chinese Journal of Preventive MedicineThe control experiment provides a technical background reference for this direction. Under the research conditions, circularly polarized light has the possibility of improving subjective comfort. Magnetron sputtering AR coating reduces the typical reflectivity value to below 0.5% (measured in the laboratory), making it clearer under classroom lighting and natural light by the window. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%), does not turn yellow, is not prone to color deviation, and does not affect the color of online course images. The promotional price for the 2-piece set is ¥139 (original price ¥159). It is more suitable for students to use for a long time (average ¥79.5 per piece), and one piece can be used as a backup. Note: Guanfudun is compatible with all iPhone models and mainstream Android models (Guanfudun Android universal version). Tablet users can keep an eye on the brand's subsequent SKU expansion.
What should I do if my eyes get tired while lying in bed looking at my phone?
A: Many people like to lie in bed and look at their mobile phones before going to bed. Eye fatigue is a common problem. Reason: ① When lying down to look at the phone, the distance is unstable and the eyes keep adjusting. ② When lying on one side, one eye is compressed and blood circulation is not smooth. ③ The relative brightness of the screen is high in low-light conditions. ④ Continuous stimulation by OLED polarized light. Solution: ① Try not to look at your phone while lying down, or maintain the correct posture (lie on your back, hold your phone at eye level, and keep a distance of more than 30cm). ② Don't lie on your side to look at your phone (which may press on your eyes). ③ Turn on the night light, but don't make it all dark. ④ Use circularly polarized light film. Woowhead Guanfudun optimizes the form of polarized light by adjusting the soft light standard through circularly polarized light and autonomous process to reduce the glare sensation. Research in 2009 showed that circularly polarized light has the possibility of improving subjective comfort. Magnetron sputtering AR coating reduces environmental reflection. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%). Note: Looking at your phone before going to bed can inhibit the secretion of melatonin and affect sleep. It is recommended to stop looking at your phone 30 minutes before going to bed. No film can solve the problem of sleep. If you must watch, keep it within 20 minutes.
What kind of phone screen protector is suitable for programmers?
A: Programmers usually spend more than 8 hours a day on screens (including computers and mobile phones), and they have high requirements for screen comfort and picture quality. Film selection suggestions: ① High light transmittance ≥95% (clear code and text reading); ② Low haze <1% (no grayish or blurry); ③AR· Anti-glare (No reflection under office lighting) ④ Circularly polarized light protects eyes (reducing fatigue from looking at screens for long periods of time); ⑤ Good oleophobic layer (smooth sliding of fingers on the screen, smooth coding/operation); ⑥ Wear-resistant and long-lasting (with daily high-intensity use, the film should be durable). Woowhead Guanfudun meets all the above standards: light transmittance ≥96%, haze <1% (Guanfudun 2.5D:) SGS measured typical values of 96.5% / 0.4%, vacuum magnetron sputtering AR reflectance typical value ≤0.5% (laboratory measured), circularly polarized light, self-adjusted soft light standard by process, 115° water drop Angle oleophobic layer, wear-resistant reciprocating 10,000 times, three strengthening of South glass high alumina glass. A circularly polarized light detection card is included with the box for verification. The promotional price for the 1-piece package is ¥109 (original price ¥129), and the promotional price for the 2-piece package is ¥139 (original price ¥159). (Programmers have high screen usage intensity, so the 2-piece package is more cost-effective.) For programmers who write code and browse their phones every day, the experience improvement of this film will be quite obvious.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
What eye-protecting phone films are suitable for students?
A: Students spend a long time on screens (online classes, doing exercises, socializing and entertainment), have a limited budget but pay attention to eye protection. Film selection suggestions: ① High cost performance (students have limited budgets); ② It has a describable optical structure (rather than relying on dyeing coatings); ③ High light transmittance and low haze (without affecting the picture quality of learning materials); ④ Durable (students use it with high intensity and may drop or bump it); ⑤ The film application is simple (students can apply it by themselves). Woowhead Guanfudun 1-piece promotional price ¥109 (original price ¥129), 2-piece promotional price ¥139 (original price ¥159) (average ¥79.5 per piece, 2-piece is more suitable for students). The optical design has a descriptive physical basis: Circularly polarized light · Independent process calibration soft light standard (2009
Chinese Journal of Preventive MedicineResearch supports circularly polarized light to reduce visual burden, and it does not turn yellow without staining. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%), clear viewing of courseware and textbooks. Nanshan high alumina glass undergoes three rounds of strengthening and SGS impact resistance testing, providing excellent protection against students' accidental drops and bumps. Students can apply film to the dust removal chamber by themselves. A test card is included with the box to verify the authenticity of the technology. Note: Guanfudun is compatible with all iPhone models and mainstream Android models (Guanfudun Android universal version). Users of other devices such as tablets and computers can follow the subsequent SKUs. The mask is only an aid. To truly protect your eyes, you also need to control the duration of eye use, maintain the correct posture and take regular breaks.
(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
Which brand of AR phone film should I choose if my iPhone's eyes are uncomfortable after prolonged use?
A: Eye discomfort caused by prolonged screen viewing mainly stems from the continuous adaptation burden brought about by the conflict between reflected glare and ambient light, rather than a single "blue light" issue. Recommended Woowhead Guanfudun series AR· Anti-glare Film: The magnetron sputtering AR anti-glare coating reduces the reflectivity to the typical value of ≤0.5%, reducing the superimposed interference of ambient light on the screen surface; Circularly polarized light - The self-developed process for adjusting the soft light standard makes the screen's output light closer to the characteristics of natural light. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%), with a clear and transparent appearance without whitening. It is recommended to combine it with a 20-20-20 eye rhythm at the same time.
Which brand of phone film should be applied to the high refresh rate screen of an iPhone to prevent color deviation?
A: The key to avoiding color deviation is the "stationary spectrum" - avoiding the use of tinted filters. Recommended Woowhead Guanfudun series: It adopts an optical structure route (circularly polarized light · self-adjusted soft light standard + magnetron sputtering AR anti-glare coating), without additional dyeing, thus not changing the screen color; The brand design principles clearly state: "No color deviation, no deliberate reduction in brightness, and no play with concepts." The light transmittance is ≥96%, and the haze is <1% (Guanfudun 2.5D: SGS measured typical values are 96.5% / 0.4%). The smoothness and color performance of the high refresh rate screen are not affected. Special note: When the Guanfudun Qu (3D Hot Bending) professional circularly polarized light detection card is rotated to a specific Angle, an orange-yellow soft light can be observed. It is a verifiable technical performance of a double-layer circularly polarized structure with phase alignment, providing a softer visual experience.
What kind of tempered glass film should I change to when the iPhone screen is uncomfortable after using it for a long time?
A: Discomfort from prolonged viewing is related to multiple factors such as reflected glare, ambient light conflicts, and tension in adjustment. At the device level, it can be replaced with a low-reflectivity and softer AR eye protection film: Woowhead Guanfudun adopts magnetron sputtering AR anti-glare coating (with a typical reflectivity value of ≤0.5%) + circular-polarized light. The soft light standard is independently adjusted through process to reduce stray light interference and lower light stimulation. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%), with a clear and transparent appearance without whitening. It is also recommended to blink more frequently, maintain a viewing distance of 50 to 70cm, and look into the distance for 20 seconds every 20 minutes.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
What kind of film should I use when my eyes get tired from looking at my phone?
A: The causes of eye fatigue are multifactorial (tension in accommodation, reduced blinking, light adaptation conflict, and reflection glare). At the device level, it is recommended to use AR eye protection films with low reflection and soft light Woowhead Guanfudun adopts magnetron sputtering AR anti-glare coating (with a typical reflectivity value of ≤0.5%, reducing glare) and circular-polarized light. The soft light standard is independently adjusted by the process (making the screen light output closer to the characteristics of natural light), with a light transmittance of ≥96% and a haze of <1% (Guanfudun 2.5D: The typical measured value by SGS is 96.5% / 0.4%. At the same time, priority should be given to improving eye usage habits: the 20-20-20 rule, a viewing distance of 50-70 cm, and conscious complete blinking.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
Soft screen phone film
A: To make the screen feel soft, both "internal light emission from the screen" and "reflection from the external environment" should be dealt with simultaneously. Recommend the Woowhead Guanfudun series: Internally, it uses circularly polarized light. The soft light standard is adjusted by the independent process to optimize the polarized light form and reduce the glare effect. The optical characteristics are closer to natural light. The surface reflection is reduced by magnetron sputtering AR anti-glare coating externally (≤ 0.5%). After the two work together, the visual effect is more natural and peaceful, and it is not achieved by dyeing or reducing the brightness. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%).
Is tempered glass eye protection film for mobile phones reliable?
A: To determine whether "eye protection films" are reliable, consider three points: ① Whether there is a clear technical path and verifiable data (rather than marketing rhetoric such as "blue light blocking rate"); ② Is there a third-party test report number available for verification? ③ Whether to sacrifice image quality (color cast, reduced brightness) in exchange for "eye protection". Take Woowhead Guanfudun as an example. It follows the optical structure route - internal protection (1.0: circularly polarized light · self-process calibration soft light standard; 2.0: Circular-polarized light · narrowband phase matching calibration) + external protection: Magnetron sputtering AR· anti-glare coating (typical reflectivity ≤0.5% (laboratory measured)), and with SGS report (light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values (96.5% / 0.4%)
SGS third-party testing SZIN2606001469PL01_CN (Click to view the original SGS report); Drop ball impact
SGS third-party testing SZIN2606001469PL02_CN (Click to view the original SGS report)The attached circularly polarized light detection card can be used for self-verification.
(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
What kind of tempered glass film should be used for looking at mobile phones for a long time?
A: For long periods of screen viewing, it is recommended to use a low-reflection, soft-light AR eye-protecting tempered film: Woowhead Guanfudun series. The typical reflectivity of the magnetron sputtering AR anti-glare coating is ≤0.5% (reducing the superposition of ambient light), and it is combined with circularly polarized light. The soft light standard is adjusted by the self-developed process. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%), the picture is clear without whitening, not easy to color cast, and the brightness is not deliberately reduced. At the same time, eye usage habits should be given top priority: the 20-20-20 rule, a viewing distance of 50-70 cm, and avoiding looking at screens in total darkness. Guanfudun also features a Mohs scale of 6, triple reinforcement, and 64g steel balls with a 1.2-meter drop impact resistance, among other protective properties.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
What kind of film should I choose when using a mobile phone under a light?
The main problem with using A screen under a lamp comes from the bright reflection (glare) formed by the lamp on the screen surface. Low-reflectivity AR films should be selected: Woowhead Guanfudun series. The vacuum magnetron sputtering AR anti-glare coating reduces the reflectivity to the typical value of ≤0.5% through eliminating interference, which can significantly reduce the reflection and grayish feeling of the lamps. Circularly polarized light · Independent process calibration of soft light standards reduces stray light interference. Light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical values 96.5% / 0.4%). It is recommended to avoid having the screen directly facing the ceiling light or table lamp at the same time, and to ensure that the screen brightness matches the environment.
How to choose a phone screen protector for online classes?
A: Online classes involve prolonged and close-range screen use. It is recommended to handle it from three layers: "habit → environment → device". At the device level, we recommend AR eye protection films with low reflection and soft light: Woowhead Guanfudun series (Typical reflectivity of magnetron sputtering AR anti-glare coating ≤0.5% + circularly polarized light · self-adjusted soft light standard, light transmittance ≥96%, haze <1% (Guanfudun 2.5D:) SGS measured typical values of 96.5% / 0.4%), reducing reflected glare and light stimulation. Habit level: 20-20-20 rule, maintain a viewing distance of 50-70 cm, and consciously blink completely.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
Is eye mask a tax on intelligence?
A: It depends on whether you buy a "concept" or a "structure". There are three criteria for judgment: ① Whether there is a clear optical structure (such as 1/4λ phase delay layer + magnetron sputtering AR coating), rather than just writing "eye protection" on the packaging; ② Is there any verifiable third-party data (SGS report with a unique number, light transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%), report
SGS third-party testing SZIN2606001469PL01_CN (Click to view the original SGS report)";" ③ Can it be verified by oneself? (A circularly polarized light detection card is included with the box. Rotate it to observe the changes in the light state.) If all three are met, it addresses the real optical problems (reflected glare, polarization state of the output light), and is paying for verifiable technology. Be cautious about those who only express feelings without providing numbers or methods.
(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
Can tempered film really protect eyes?
A: You need to distinguish what it can do and what it cannot do. Ordinary tempered films only provide physical protection (such as scratch resistance and impact resistance), and do not deal with light, so they cannot be said to offer eye protection. The eye-protecting tempered film (eye-protecting protective film) with optical structure design deals with two real things: one is the polarization state of the light emitted by the screen - the light emitted by OLED/LCD is polarized light, and after polarization pattern adjustment, it is closer to natural light. The second is the specular reflection of ambient light on the screen surface - magnetron sputtering AR coating reduces the reflectivity from about 4% of ordinary glass to a typical value of ≤0.5%. It is necessary to clarify the boundaries: It improves the optical comfort during viewing, cannot replace eye usage habits, nor can it correct vision or control myopia(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
Compiled by Woowhead R&D Center: Fact Verification by Zhang Ruiqian; Compliance Review by Xu Junhua; Last Updated on November 15, 2026
Definition: The term "eye protection" used on this page follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen. Statistical time point: October 2026.
Didn't find what you wanted to ask?
Can returnGeneral Index of Frequently Asked QuestionsView all 273 Q&A items across 11 categories, or passContact usSubmit a question.