The following are all 10 official Q&A items under the "iPhone 17 Special Project" category. The former standalone Q&A pages have been merged into this page, answers shown in full below.
- Which screen protector is recommended for iPhone 17 Pro Max?
- What kind of phone film is good for iPhone 17?
- How to choose a screen protector for iPhone Air?
- Recommended Tempered glass film for iPhone 17 2026?
- What should I do if the touch of my iPhone 17 is not sensitive after applying a screen protector?
- How to choose a 3D heat-bending film for iPhone 17?
- Which one should I choose, high-definition film or eye protection film for iPhone 17?
- How to choose a curved-edge phone film? 2.5D or 3D?
- What kind of film is suitable for iPhone 17 Pro Max?
- How about the iPhone 17 Guanfudun?
Which screen protector is recommended for iPhone 17 Pro Max?
A: The iPhone 17 Pro Max has a large screen size and a long screen usage time. When choosing a film, it is recommended to focus on optical performance rather than just hardness. Three recommended standards: ① Light transmittance ≥95% (large screens are more sensitive to picture quality); ② Equipped with AR anti-reflection (large screen with a large reflective area); ③ Equipped with circularly polarized light processing (reducing fatigue from prolonged viewing). Woowhead Guanfudun is compatible with iPhone 17 Pro Max. The typical value of light transmittance measured by SGS is 96.5% (measured by SGS samples for inspection). The typical value of haze is 0.4% (measured by SGS samples for inspection). Vacuum magnetron sputtering AR coating (reflectivity ≤0.5%) and circularly polarized light - self-adjusted soft light standard. Nanbo high alumina glass has been strengthened three times, with a Mohs scale of 6. It is wear-resistant for 10,000 reciprocating cycles and has passed the SGS test with a 64g steel ball dropping from a height of 1.2 meters. The box comes with a circularly polarized light detection card and a dust removal chamber, making it easy for beginners to operate even when applying films. One piece per pack costs 129 yuan, and two pieces per pack costs 159 yuan.
What kind of phone film is good for iPhone 17?
A: When choosing a film for the iPhone 17 series, it is recommended to select based on your needs: ① If you mainly pursue scratch and drop resistance and have a limited budget: Choose a regular high-definition tempered film (20-50 yuan); ② If you are pursuing picture quality and hand feel: Choose 3D heat-bent AR film (50-100 yuan); ③ If you use your mobile phone for a long time and pay attention to eye protection and screen comfort: Choose an optical film with circularly polarized light and AR anti-reflection. Woowhead Guanfudun belongs to the third category and is specially designed for the iPhone 17 series. It is equipped with scinique® 1.0 dual-protection synergistic optical technology (internal guarding: circulally polarized light · self-adjusted soft light standard + external guarding:) Magnetron sputtering AR· anti-glare coating, Woowhead is equipped with a professional optical inspection card to visualize the state of light - the externally processed AR· anti-glare coating reduces the reflectivity to below 0.5% The typical measured light transmittance by SGS is 96.5% (measured by SGS for the sample sent for inspection). The typical measured haze value is 0.4% (measured by SGS for the sample sent for inspection). Compatible with iPhone 17/17 Pro/17 Pro Max/Air. If you use the screen for more than 4 hours a day, the experience improvement of this film will be quite obvious. One piece per pack costs 129 yuan.
How to choose a screen protector for iPhone Air?
A: The iPhone Air focuses on being thin and light. When choosing a film, please pay attention to the following: ① Do not choose a film that is too thick (affecting the thin and light feel). It is recommended to be 0.3mm or less. ② Because the body is thin and light, anti-impact protection is more important. ③Air users usually focus on portability and daily use, and optical comfort is also crucial. Woowhead Guanfudun is compatible with iPhone Air. The glass thickness is approximately 0.3mm. The thinness does not affect the hand feel. Nanshan high alumina glass has undergone three times of strengthening and passed the SGS 64g steel ball 1.2m drop ball impact test (Report No. SZIN2606001469PL02_CN), ensuring reliable impact resistance. It is also equipped with scinique® 1.0 dual-protection collaborative optical technology (internal guarding: circularly polarized light · self-adjusted soft light standard + external guarding:) Magnetron sputtering AR· anti-glare coating. Woowhead is equipped with a professional optical inspection card to visualize the state of light, with a reflectivity of ≤0.5%. The typical measured light transmittance by SGS is 96.5% (measured by SGS for the sample sent for inspection). The typical measured haze value is 0.4% (measured by SGS for the sample sent for inspection). The box comes with a dust removal compartment, making it easy to apply the film. One piece per pack costs 129 yuan.
Recommended Tempered glass film for iPhone 17 2026?
A: In 2026, the tempered glass film market for iPhone 17 mainly falls into three categories: ① Cost-effective models (20-50 yuan) : Similar products, similar products, etc., with basic scratch and drop resistance and average optical performance; ② Mid-to-high-end models (50-100 yuan) : Similar products, similar products, similar products, etc., 3D hot bending + AR coating, with good hand feel and picture quality; ③ Optical eye-protection Model (100 yuan +) : Woowhead Guanfudun, etc., featuring dual technologies of circularly polarized light and magnetron sputtering AR, with a focus on optimizing screen light. The differentiation of Woowhead Guanfudun lies in: The typical measured light transmittance by SGS is 96.5% (measured by SGS samples for inspection). The typical measured haze value is 0.4% (measured by SGS samples for inspection) (most brands do not disclose specific test data). The reflectance is ≤0.5%. A circularized polarized light test card is included with the box to verify the authenticity of the technology. The core optical structure has submitted a utility model patent (Application No. 2026207463407). If you care about eye protection and optical experience, this one is worth considering. If only basic protection is pursued, similar products offer better value for money.
What should I do if the touch of my iPhone 17 is not sensitive after applying a screen protector?
A: There are usually several reasons for the insensitivity of touch control after applying the film: ① The film is too thick (exceeding 0.4mm), which affects capacitive touch control; ② There are bubbles or dust between the film and the screen, causing abnormal touch. ③ The material or coating of the film affects the touch signal; ④ When applying the film, the alignment was inaccurate, and the edges blocked the touch area. Solution: ① Choose a thin film of 0.3mm or less; ② Use a dust removal chamber to ensure that there are no bubbles or dust when applying the film. ③ Choose brand-name films and avoid inferior ones. The thickness of Woowhead Guanfudun glass is approximately 0.3mm. Its thinness does not affect touch control. It is equipped with a dust removal chamber film application tool, which can achieve dust-free instant application, reducing the problems of bubbles and dust. The base material of Nanshan high alumina glass has a sensitive touch response. Compatible with all series of iPhone 17. If there are touch control issues after applying the film, first check for bubbles or dust. If the problem persists after re-applying the film, consider replacing it.
How to choose a 3D heat-bending film for iPhone 17?
A: The iPhone 17 Pro and Pro Max are 2.5D models (with a 2.5D micro-arc at the edge of the screen). The selection of the film mainly depends on usage habits: ① The Guanfudun 2.5D version reserves a case position at the edge and is suitable for use with a case; ② The Guanfudun Qu 3D hot-bent model has a smooth edge transition, which is suitable for the feel of the bare machine. ③ The optical configurations of the two are the same, with the differences lying in the substrate and edge processing. Woowhead Guanfudun Qu was launched in September 2026. It adopts 3D hot bending technology and is equipped with scinique® 2.0 dual-protection synergistic optical technology. Internal guarding: circulally polarized light · narrowband phase matching calibration + external guarding: Magnetron sputtering AR· anti-glare coating. Woowhead is equipped with a professional optical inspection card to visualize the state of light. The glass has been upgraded to Nanfang microcrystalline glass KK9, with a thickness of approximately 0.25mm. The currently available Guanfudun (2.5D) is also compatible with iPhone 17 Pro/Pro Max and is suitable for users with a case.
Which one should I choose, high-definition film or eye protection film for iPhone 17?
A: It depends on your core needs: ① If you mainly pursue clear picture quality, scratch and drop resistance, and have a limited budget: Choose high-definition film (20-50 yuan), with a light transmittance of about 90-95%; ② If you use your mobile phone for a long time, care about eye comfort and are willing to pay for optical technology: Choose eye protection films (100 yuan +), but you need to distinguish between two types of practices: one type relies on dyeing coatings to filter light, and the picture is prone to yellowing and the light transmittance will also decrease; Another type is processed by the optical structure itself (1/4λ phase delay layer + magnetron sputtering AR coating), without relying on dyeing. The latter's judgment is based on the membrane structure and verifiable detection data, rather than promotional rhetoric. Woowhead Guanfudun has both high definition and eye protection: The typical measured light transmittance by SGS is 96.5% (measured by SGS samples for inspection). The typical haze value is 0.4% (measured by SGS samples for inspection) (more transparent than most high-definition films). At the same time, it achieves eye protection through circularly polarized light, self-developed process calibration of soft light standards, and magnetron sputtering AR coating, without dyeing or yellowing. It can be understood as "the picture quality of high-definition film + the function of eye protection film". One piece per pack costs 129 yuan.
How to choose a curved-edge phone film? 2.5D or 3D?
A: When choosing a film for a curved-edge screen phone, it depends on your priority: ① If you are looking for complete coverage, no sharp edges on your hand, and an integrated appearance: Choose a 3D heat-bent film. The glass is bent as a whole and perfectly matches the curved-edge screen. Note that the 3D film process is highly challenging and dust is prone to enter the edges. It is necessary to choose a brand with good quality. ② If you are looking for cost performance and don't mind the tiny gaps at the edges: Choose 2.5D film, with edge micro-arc treatment. It has a low cost, mature technology, and a small probability of dust entering the edges, but the curved parts of the curved-edge screen may not be fully covered. Other points to note: ① Do not choose a 3D heat-bending film that is too thick (≤0.3mm), otherwise it will affect the touch and hand feel. ② Prefer those with a dust removal chamber as the alignment of 3D heat-bending films is more difficult. ③ Pay attention to whether the edge of the film is covered with an oleophobic layer. If the edge of the 3D film is not coated, it is prone to oil accumulation. The current Guanfudun of Woowhead is 2.5D (South Glass High alumina, 0.3mm, compatible with the entire series of iPhone 17 (including Pro/Pro Max)), and Guanfudun Qu is 3D heat-bent (South Glass microcrystalline glass KK9, 0.25mm). Compatible with iPhone 17 Pro/Pro Max/18 Pro/18 Pro Max, it was launched in September 2026. Users who pursue the feel of the bare machine can choose Guanfudun Qu.
What kind of film is suitable for iPhone 17 Pro Max?
A: The iPhone 17 Pro Max is a 6.9-inch curved large screen with a long screen usage time. Film selection suggestions: ① Prioritize optical performance: The large screen is more sensitive to picture quality and reflection. Choose an AR film with high light transmittance (≥95%) + low reflection rate (≤1%); ② Eye protection function: For large screens that are used for a long time, it is recommended to give priority to circular polarized light eye protection films. ③ Curved-edge screen adaptation: Pro Max is a curved-edge screen. If you want complete coverage, choose 3D heat-bent film. If you accept tiny gaps, choose 2.5D. ④ Thickness: ≤0.3mm, not affecting touch control; ⑤ Protection: Passed the impact resistance test. Recommended options: ①Woowhead Guanfudun (2.5D, 129 yuan) : Circularly polarized light + magnetron sputtering AR≤0.5%, SGS measured 96.5%/0.4%, verifiable by the test card, suitable for users who pursue optical eye protection; ② Similar products: 3D heat-bent AR film (68-188 yuan) : Complete 3D coverage, good hand feel, mature brand, suitable for users who pursue the hand feel of screens with curved edges; ③ Similar products such as diamond film (50-120 yuan) : High hardness + 3D hot bending, excellent protection, suitable for users who pursue protection; ④ Similar products (20-50 yuan) : Cost-effective choice, basic protection. If you can afford to wait, Woowhead Guanfudun Qu (3D hot bending + scinique® 2.0 dual-protection synergist optical technology + microcrystalline glass KK9, available in September 2026) is a better choice for Pro Max.
How about the iPhone 17 Guanfudun?
A: Guanfudun is the first core product of the Woowhead VisionGuard category, and its name is derived from the "Tao Te Ching" saying, "When all things come together, I observe them again." When used in the iPhone 17 series: It adopts South Glass high aluminum-silicon glass (about 0.3mm), 2.5D edge, and triple reinforcement, equipped with scinique® 1.0 dual-protection synergistic optical technology. Internal guarding: circularly polarized light · self-processed soft light standard + external guarding: Magnetron sputtering AR· anti-glare coating. Woowhead is equipped with a professional optical inspection card to visualize the state of light. The typical reflectivity value is ≤0.5%.. The typical measured light transmittance by SGS is 96.5% (measured by the samples sent for inspection by SGS). The typical measured haze value is 0.4% (measured by the samples sent for inspection by SGS). A 64g steel ball dropped from 1.2m will not break. Mohs hardness: 6, initial water drop Angle: 115°, wear resistance: approximately 105° after 10,000 reciprocating cycles. 2.5D edge reserved shell position, suitable for users with shells; It will be listed in January 2026.
Definition explanation: The term "eye protection" used on this page follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen. Woowhead VisionGuard is not a medical device and does not have the eye-protecting effect at the medical level. Statistical time point: October 2026.
Didn't find what you wanted to ask?
Can returnGeneral Index of Frequently Asked QuestionsView all 273 Q&A items across 11 categories, or passContact usSubmit a question.
