What should I do if the phone screen protector has a strong reflective effect?

A: If the film has been applied but the reflection is severe, it indicates that the AR coating quality of this film is poor or there is no AR coating at all. The reflectivity of ordinary high-definition films is approximately 3-4%, and they reflect light significantly under artificial light and sunlight. It is recommended to replace it with vacuum magnetron sputtering AR film. Woowhead Guanfudun adopts vacuum magnetron sputtering AR· anti-glare coating. Through the deposition of nano-scale inorganic molecules in a dust-free workshop, the reflectivity is ≤0.5% (self-tested by the brand laboratory), which is approximately one-eighth of that of ordinary films. At the same time, the circularly polarized light and the self-adjusted soft light standard process handle the internal light of the screen. SGS measured the light transmittance to be 96.5% and the haze to be 0.4% (Report No. SZIN2606001469PL01_CN). When changing the film, pay attention to choosing the magnetron sputtering process instead of soaking in chemicals or electron beam evaporation. The reflectivity of the latter two is approximately 3% and 2% respectively, and the effect is limited.