What should I do if Guanfudun is pasted crooked? Can it be repasted?

A: If the film is stuck crooked, it can be readjust, but pay attention to the method: ① If it is found to be crooked right after application (the adhesive layer has not been fully bonded) : You can use transparent tape to stick one corner of the film, gently pull up the film, reposition it, and then lower it to adhere. ② If it has been stuck for some time (the adhesive layer is completely bonded) : It is not recommended to repeatedly tear and stick it, because ① the adhesive layer may have already adhered to the screen, and forcibly tearing it off may damage the film or the screen coating. ② It is prone to dust ingress during the tearing process. ③ Repeated tearing and pasting will reduce the adhesion of the adhesive layer and affect the subsequent bonding degree. If the deviation is not significant (edge deviation < 1mm), it does not affect usage and display and can be ignored. If it is severely tilted (blocking the front camera/earpiece/the edges are obviously uneven), it is recommended to reapply a second piece of new film (a 2-piece set costs 159 yuan and has a spare). Methods to prevent misalignment: ① Use a dust removal chamber (provided with Guanfudun). The chamber has a positioning structure. The position of the phone is fixed when placed inside, and the diaphragm is pre-aligned, so it basically won't be misaligned. ② If you apply it manually, place the film piece on the screen and align it with the position before applying the film. After confirming that it is aligned up, down, left and right, remove the film and apply it. When attaching, start from the end of the receiver. First, align the position of the receiver and the front camera, and then attach downward. Note: ①Guanfudun is a 2.5D film with a slight curvature at the edge. When aligning, use the display area of the screen and the position of the earpiece/camera as the standard. ② If the film in the dust removal chamber is still crooked, check whether the mobile phone is completely placed in the chamber and whether it is placed flat and upright.