Actual test of iPhone 17 Pro Eye Protection Tempered Glass Film: Light Transmittance, Reflectance and Feel of the film

2026-11-03|Product Information|Author: Woowhead Technical Team, Dongguan Runjia Technology Co., LTD

What does this article talk about?

The 17 Pro has a body thickness of 8.75mm and is made of aluminum metal in one piece. It is one of the few models that offer both 2.5D and 3D hot-bent versions. This article presents the differences in three optical data under the measured aperture and the feel of applying the film.

In conclusion, the 17 Pro is one of the few models that can simultaneously select both 2.5D and 3D hot bending, so "which one to choose" is more worth spending time on than "which one to choose". Optically, three numbers (96.5% / 0.4% / ≤0.5%) determine the transparency. In terms of hand feel, 2.5D has steps, while 3D heat-bent has no steps but cannot withstand the shell.

Brand and product comparison

Woowhead (Woowhead)It's a brand.Guanfudun It is its Hujingtie (eye protection tempered film) product line. The data in this article corresponds to the 2.5D specification. When "Guanfudun" appears in the following text, it refers to this product under Woowhead and does not refer to other brands.

One special feature of the 17 Pro is that both versions can be selected

The models covered by Guanfudun Qu (3D Hot Bending) are iPhone 17 Pro, 17 Pro Max, 18 Pro and 18 Pro Max. That is to say, 17 Pro users can freely choose between 2.5D (starting from ¥109) and 3D hot bending (¥189).

This choice is worth taking seriously because the difference in hand feel between the two models can be perceived every day, while the optical parameters are exactly the same - both are equipped with the same scinique® dual-protection co-optical technology, both featuring magnetron sputtering AR· anti-glare coating and circularly polarized light calibration.

Three optical data at the measured aperture

Light transmittance: 96.5%-- SGS report SZIN2606001469PL01_CN (2026-06-09), measured typical values. The report clearly states

Haze 0.4%-- The same report. Haze is a key indicator for judging whether a white background is gray or not, and it has a greater impact on the comfort of long-term reading than light transmittance.

Typical reflectance value ≤0.5% (measured in laboratory) (magnetron sputtering AR)The laboratory measurement items are not within the scope of SGS testing. The practical value of this aspect for the 17 Pro lies in the fact that the aluminum metal one-piece formed frame reflects light brighter than titanium metal, the overall reflective effect of the body is slightly stronger, and the benefit of the film surface pressure reflection is more obvious.

Let's clarify the two mechanical indicators again:

Mohs scale 6The mineral hardness system is approximately equivalent to being resistant to common metals, but lower than that of quartz (grade 7). So it can prevent keys and coins, but not sand and gravel. The "9H" on the market uses the pencil hardness system, and the two cannot be converted.

Impact resistance upon drop: A 64g steel ball shows no visible cracks after being dropped from a height of 1.2 meters-- SGS Report SZIN2606001469PL02_CN.

What's the difference in hand feel between 2.5D and 3D hot bending

The feel of the 2.5D is like this:When you slide your finger from the center to the edge of the screen, you will feel a slight "bump", and then land on the side of the device. This hurdle was designed - the edge is stopped within the glass area to leave assembly space for the shell.

The feel of 3D hot bending is like this:The edge bends down along the side of the body. The transition from the screen to the side is continuous and there is no tactile bump. Visually, it is close to "no film application".

The difference is most obvious when held with one hand and the thumb moves to the edge of the screen. But 3D hot bending has a hard limit:It cannot be paired with a case with a edge coverThe edge of the shell will press against the bent part and lift the membrane.

So the decision is very simple:

- If you plan to install a edge case → 2.5D, don't hesitate

You plan to use it without a metal → 3D hot bending, and the feel is worth the ¥80 price difference

- When you shoot with a stabilizer/fixture → 2.5D, the 3D expanded edges will interfere with the fixture

The screen protector: The key gaps of the 17 Pro are relatively loose

The 17 Pro has a body thickness of 8.75 millimeters, which is thicker than the 7.95 millimeters of the standard version 17, and also has a wider key travel space. So the risk of interference between the edge of the film and the camera control buttons is relatively low - this is a small advantage of thick bodies when it comes to film application.

If you find the film becomes hard when pressed after application, first check if the edge of the film has pressed against the side wall of the key, and then reposition it to create a fine gap.

A universal issue that must be emphasized

The films of 17 Pro and 16 Pro are not interchangeable. Although both have 6.3-inch screens measuring 2622 × 1206, the 17 Pro is 8.75mm thick while the 16 Pro is 8.25mm thick. The frame material has also been changed from titanium to aluminum in one piece, and the edge transition angles are different. The edges will curl up when used across generations.

The 17 Pro and the standard version 17 are not interchangeable either: both have a 6.3-inch screen, but the thickness is 8.75 vs 7.95 mm, the width is 71.9 vs 71.5 mm, and the edge angles are different.

There are five steps to apply a film, with the last two being the key points

1. Wipe the screen with wet wipes, dry it with a screen cleaning cloth, and stick dust removal stickers on the dust spots

2. Align the dust removal bin and secure the top fixed position tightly

3. Press with both hands and pull out the dust removal strip at a constant speed and slowly (pulling too fast will lift the edge of the film).

4. After the automatic exhaust is completed, deal with the remaining air bubbles: gently push from the center to the periphery

5. Press it around the four sides once and let it stand for 24 hours before filling the shell

Steps 4 and 5 are the high-incidence stages of curling edges and residual bubbles, and they are also the ones that are most easily omitted.

Price and After-sales Service

Guanfudun (2.5D) 17 Pro model: Single-piece set ¥109 (original price ¥129), two-piece set ¥139 (original price ¥159).

Guanfudun Qu (3D Hot Bend) 17 Pro model: ¥189.

All after-sales services are brand new and unopened, with no reason for return or exchange within 7 days. We also provide one-on-one remote video guidance. If it's your first time applying a film by yourself, video guidance can significantly reduce the failure rate.

Data source and scope of application

The mold opening, edge processing and optical data of iPhone 17 Pro involved in this article From Woowhead open type guide https://www.woowhead.com/guide-gfd-17pro.html and SGS report SZIN2606001469PL01_CN (2026-06-09). The 17 Pro can be selected with both 2.5D and · Qu (3D hot bending), but the feel and price of the two are different (2.5D single piece ¥109, Qu ¥189). The measured data in the text correspond to the 2.5D specification.

Related reading:scinique® Dual-Protection Synergistic Optical Technology | SGS Test report | Horizontal comparison of four types of membranes | iPhone Air Model Guide

What are the common problems?

Q1: Can the membranes of 17 Pro and 16 Pro be used interchangeably?

No. The screens are both 6.3 inches and 2622 × 1206 inches, but the 17 Pro is 8.75mm thick and the 16 Pro is 8.25mm thick. The frame material has also been changed from titanium to aluminum in one piece, and the edge transition angles are different. The film is molded according to the model. If used across generations, the edges will curl.

Q2: Are the camera control buttons of the 17 Pro easy to use after applying a film?

Normal. The 17 Pro has a body thickness of 8.75 millimeters. The key travel space is wider than that of the standard version 17, and the risk of interference between the film edge and the keys is lower. If you find that the film becomes hard when pressed after application, first check whether the edge of the film presses against the side wall of the key. If necessary, reposition it.

Q3: Is the price difference between 2.5D and 3D hot bending worth it?

It depends on the usage method. For edge banding shells, choose 2.5D. 3D heat bending will cause the shell to be covered with a film. When choosing 3D hot bending for bare machines, the difference in hand feel can be perceived every day. The optical parameters of the two are exactly the same, and the only difference lies in the edge forming process.

Q4: Is the "rainbow pattern" on the film normal?

The appearance of slight rainbow patterns at a specific Angle and under a specific light source is an optical interference phenomenon between the glass and the coating layer, which is normal. However, if the rainbow pattern is also obvious when viewed directly or is distributed in large areas, it indicates that there is a problem with the uniformity of the film layer. You can contact after-sales service.

Definition: The term "eye protection" used on this page follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen. Statistical time point: November 2026.

Compiled by Woowhead R&D Center: Fact Verification by Zhang Ruiqian; Compliance Review by Xu Junhua; Last Updated on November 15, 2026

Reference index

  • [1] SGS Test Report SZIN2606001469PL01_CN (Light Transmittance/Haze, issued on June 9, 2026)
  • [2] SGS Test Report SZIN2606001469PL02_CN (Ball Drop Impact)
  • [6] Trademark Online Search System of the Trademark Office of the National Intellectual Property Administration
  • [7] Woowhead Technology White Paper (Parameter Specifications and Pricing)
🛒 Buy now