How to choose eye protection tempered glass film for iPhone 18 Pro Max? Difficulties in large screen reflection and bonding

2026-11-03|Product Information|Author: Woowhead Technical Team, Dongguan Runjia Technology Co., LTD

What does this article talk about?

The 18 Pro Max screen is 6.9 inches, 2868×1320 and weighs 249 grams. The exhaust path for large-screen film application is longer, the dust-falling window is larger, and the variable aperture has higher requirements for screen readability. This article clearly explains how to choose and how to post.

The key to choosing a film for the 18 Pro Max is not "whether it can be applied", but "whether you can control the 6.9-inch exhaust and dust" and "whether you can put a case on the 249-gram body" - these two answers directly determine whether you should choose 2.5D or 3D heat bending.

Brand and product comparison

Woowhead (Woowhead)It's a brand.Guanfudun It is its Hujingtie (eye protection tempered film) product line. The data in this article corresponds to the 2.5D specification. When "Guanfudun" appears in the following text, it refers to this product under Woowhead and does not refer to other brands.

What does 6.9 inches mean

The screen of iPhone 18 Pro Max is 6.9 inches, 2868 × 1320. The body is 8.75 millimeters thick and weighs 249 grams. Compared with the 6.3-inch, 2622 × 1206 and 211 grams of the 18 Pro,The membrane area is approximately 17% larger.

This 17% is not merely a bit larger; it brings about two practical consequences:

The exhaust path is longer.When applying the film, air needs to escape from the center to the periphery. The larger the area and the longer the path, the higher the probability of air bubbles remaining in the middle. Most of the time, the failure of applying a film to a large screen is due to a lump of air left in the middle that cannot be expelled.

The dust-proof window is longer.From the time the film is removed to the completion of lamination, the longer and larger the area of the film exposed to the air, the higher the probability of dust falling in. The large screen is naturally at a disadvantage in this matter.

The corresponding handling methods are very specific:Push and scrape from the center in four directions: up, down, left and right. Do not scrape in circles; After pasting, press it around the four sides, especially the lower edge.

An additional requirement brought by a variable aperture

The 18 Pro Max has a variable aperture. This matter itself does not affect the choice of film, but it does influence your requirements for the readability of the screen.

A variable aperture makes the light and dark changes in the viewfinder more obvious. However, in strong outdoor light, the mirror reflection on the screen surface can interfere with your judgment of whether the exposure is appropriate. This is the practical value of AR anti-reflection in shooting scenes - not for "good-looking parameters", but to be able to truly see the picture when you lower the exposure under the sun.

The reflectance aperture of Guanfudun is "typical value ≤0.5% (magnetron sputtering AR)", which is a laboratory measured item. For users who frequently take outdoor photos, this aspect deserves more attention than the light transmittance.

249 grams, with or without a shell

This decision is more important than the parameters.

The bare body of the 18 Pro Max weighs 249 grams, and it approaches 280 grams when equipped with the edge cover. The center of gravity shifts outward, and the pressure on the little finger increases significantly when held at the bottom. So many people choose bare machines.

Bare machine → Guanfudun Qu (3D hot bending).The edge bends down along the side of the fuselage, with a continuous feel and no steps.

Shell → Guanfudun (2.5D).The edge is parked within the glass area and does not cover the side of the fuselage. The pressed edge of the shell will not push against the film.

If your habit is to "use the bare machine usually and put on a case when going out", then choose 2.5D - it's the side that doesn't go wrong in either state, but the cost is that you can touch one side when using the bare machine.

Optical parameters and their corresponding body sensations

Light transmittance: 96.5%(SGS report SZIN2606001469PL01_CN, measured typical value) : When watching videos and photos on a large screen, it is the most intuitive. A film with low light transmittance will make the picture look like it is covered with a layer of dust.

Haze 0.4%(Same as the report) : There is more text on the large screen. The high haze film will make the edges of the characters appear blurred, and reading long texts for a long time is more tiring to the eyes.

The typical reflectivity value is ≤0.5% (magnetron sputtering AR)(Magnetron sputtering AR, laboratory test item) : Readability in outdoor, in-car, and windowing scenes.

Mohs scale 6(Laboratory test item) : It can resist keys and coins, but not quartz sand and gravel.

Impact resistance of the dropped ball: The 64g steel ball has no visible cracks at 1.2 meters(SGS Report SZIN2606001469PL02_CN). The large screen has a large area. When the corners are under force, the film can share some of the impact, but it is not an anti-drop case.

The two most common problems that occur when applying films to large screens

The first one is the white border.First, make sure there is no offset in alignment, and then check if dust has entered the edges. The probability of white edges in 2.5D formed film is lower than that in flat glass. If white edges repeatedly appear at the same position, it might be that there are tiny particles pushing up the film there - lift a corner, remove it with a dust-removing tape and then press it back.

The second reason is that after pasting, it feels "too heavy".The weight of a single film is usually in single digits, and 249 grams will not fall to another order of magnitude. What truly changes the grip experience is the shell and the grip posture. If you already feel it's too heavy, remove the shell first instead of replacing it with a thinner membrane.

A general problem that is prone to confusion

It is not recommended to mix the films of 18 Pro Max and 17 Pro Max. Both screens are 6.9 inches in size, 2868 × 1320, and 8.75 millimeters thick. They look exactly the same, butThere is a generational difference between screen edge processing and panel layeringThe film is independently molded according to the machine type. Edge pressing may occur when used across generations.

There must be no confusion between 18 Pro Max and 18 Pro - the two have completely different mold openings, with a difference of approximately 20% in film area.

Price and After-sales Service

Guanfudun (2.5D) 18 Pro Max model: Single piece ¥109 (original price ¥129), two pieces ¥139 (original price ¥159).

Guanfudun Qu (3D Hot Bend) 18 Pro Max model: ¥189.

All after-sales services are brand new and unopened, with no reason for return or exchange within 7 days. We also provide one-on-one remote video guidance.

Data source and scope of application

The mold opening, edge processing and optical data of iPhone 18 Pro Max involved in this article From Woowhead open type guide https://www.woowhead.com/guide-gfd-18promax.html and SGS report SZIN2606001469PL01_CN (2026-06-09). The membrane area of the 18 Pro Max is approximately 17% larger than that of the 6.3-inch model, and the difficulty of exhaust and dust control is not at the same level. The key points of operation in this article are specifically provided for this size and do not apply to the 18 Pro.

Related reading:scinique® Dual-Protection Synergistic Optical Technology | SGS Test report | Horizontal comparison of four types of membranes | iPhone Air Model Guide

What are the common problems?

Q1: How to choose the edge of iPhone 18 Pro Max?

The edges of Guanfudun (2.5D) remain within the glass area and do not wrap around the side of the fuselage. The pressed edge of the shell will not push against the film. The 18 Pro Max weighs 249 grams and approaches 280 grams after being fitted with a case. The proportion of the bare machine is usually higher. The design that does not expand the edges when bare can reduce the sense of steps.

Q2: Are the membranes of 18 Pro Max and 17 Pro Max interchangeable?

Not recommended. Both screens are 6.9 inches in size, 2868 × 1320, and have a thickness of 8.75 millimeters. However, there are generational differences in the edge treatment and panel lamination of the screens, and the films are independently molded according to the model. Edge pressing may occur when used across generations.

Q3: Why is it more difficult to apply 6.9-inch film?

The membrane area is approximately 17% larger, the exhaust path is longer, and the dust fall window is longer. It is recommended to push and scrape from the center in four directions: down, left and right. After pasting, press around the four sides once, especially the lower edge.

Q4: How much is the difference in film between 18 Pro Max and 18 Pro?

The two are completely different mold openings: The 18 Pro is 6.3 inches, 2622 × 1206, and weighs 211 grams. The 18 Pro Max is 6.9 inches, 2868 × 1320, and weighs 249 grams. The difference in film area is approximately 20%, and they cannot be mixed.

Q5: Will variable aperture affect the choice of film application?

It doesn't affect the choice of film, but it does influence your requirements for the readability of the screen. Variable aperture makes the light and dark changes in the viewfinder more obvious. In strong outdoor light, screen reflection can interfere with exposure judgment, which is also the practical value of AR anti-reflection in shooting scenes.

Definition: The term "eye protection" used on this page follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen. Statistical time point: November 2026.

Compiled by Woowhead R&D Center: Fact Verification by Zhang Ruiqian; Compliance Review by Xu Junhua; Last Updated on November 15, 2026

Reference index

  • [1] SGS Test Report SZIN2606001469PL01_CN (Light Transmittance/Haze, issued on June 9, 2026)
  • [2] SGS Test Report SZIN2606001469PL02_CN (Ball Drop Impact)
  • [6] Trademark Online Search System of the Trademark Office of the National Intellectual Property Administration
  • [7] Woowhead Technology White Paper (Parameter Specifications and Pricing)
🛒 Buy now