How to choose eye protection tempered glass film for iPhone 18 Pro? New device first Post: A list to avoid pitfalls

2026-11-03|Product Information|Author: Woowhead Technical Team, Dongguan Runjia Technology Co., LTD

What does this article talk about?

The 18 Pro has a 6.3-inch screen, weighs 211 grams and is 8.75 millimeters thick. The most common pitfalls in the first application of a new device are using the film of the 17 Pro and making the wrong choice between 2.5D and 3D heat bending. This article provides the judgment criteria for selection based on usage methods.

In a nutshell: For the first application of the 18 Pro, just make one decision - use Guanfudun (2.5D) for the casing and Guanfudun Qu (3D hot bending) for the bare machine. The rest are all execution details.

Brand and product comparison

Woowhead (Woowhead)It's a brand.Guanfudun It is its Hujingtie (eye protection tempered film) product line. The data in this article corresponds to the 2.5D specification. When "Guanfudun" appears in the following text, it refers to this product under Woowhead and does not refer to other brands.

First, let's confirm one thing: The films of 18 Pro and 17 Pro are not interchangeable

The parameters of these two generations of models seem highly similar: the screens are both 6.3 inches, 2622 × 1206 inches, the body thickness is both 8.75 millimeters, and the width is both 71.9 millimeters.

butThere are generational differences in the edge treatment of screen glass and the lamination of panelsThe film is independently molded according to the machine type. The result of cross-generation use is usually that it looks fine when first applied, but after a few weeks, the edges start to show slight edge pressing and then curl up.

So the inference that "parameters are the same, so they can be used universally" does not hold true here. Before purchasing, check the list of compatible models on the product page. It only takes one second and can save you the trouble of re-posting.

2.5D or 3D hot bending? How do you use it

This is the only substantive choice that 18 Pro users need to make. Both product lines are available, and the criteria for judgment are very clear:

For shell loading → Guanfudun (2.5D).The edge of the 2.5D remains within the glass area and does not extend outward to the side of the body, so when the edge of the shell is pressed up, it will not hit the film. This is designed for scenes with shells.

For bare machine use → Guanfudun Qu (3D hot bending).The edges of the 3D hot bend bend down along the side of the body, achieving a visual effect close to "borderless", and the feel is continuous when the machine is bare. The cost is that this type of film cannot be matched with edge shells - the shells will push against the film.

The 18 Pro weighs 211 grams. This weight makes many people prefer to use it without a case. Therefore, the demand for this model on the 18 Pro is real and not just a marketing concept.

There is another exception:If you know how to shoot with a stabilizer and a fixtureIt is recommended to choose 2.5D. Since the fixture is usually clamped on the side of the machine body, the edge expansion of 3D hot bending is prone to interference with the fixture, while the edge of 2.5D does not expand outward and does not conflict.

The execution details of the first sticker on the new device

Step 1: Make sure the screen is clean before pasting.The screen of a new machine may have a very thin protective film residue or fingerprints when it leaves the factory. First, wipe it with a wet paper towel, dry it with a screen cleaning cloth, and then use a dust removal tape to stick off the fine dust spots.

Step 2: Align with the dust removal chamber.The Guanfudun is equipped with a dust removal chamber. The key points of operation are that the top fixed position should be clamped tightly, then hold the dust removal chamber with both hands and pull out the dust removal strip at a constant speed and slowly. Pulling too fast can easily lift the edges of the film.

Step 3: Wait for the automatic exhaust. Don't press it in a hurry.After removing the film and taking out the compartment, wait for the screen to complete its own air venting first, and then deal with the remaining air bubbles. Gently push from the center to the periphery. Stubborn bubbles can be gently lifted to the bubble position and then released to allow them to reattach.

Step 4: Press around the four sides once.This step is often skipped by many people, but it is the key to preventing the edges from curling up, especially the lower edge.

Step 5: After application, let it stand for 24 hours before installing the shell.This is especially important for new phone users - installing the case on the very first day of receiving the new phone is a high-risk scenario for the edges to curl up.

Optical parameters: How to understand the three numbers

Light transmittance: 96.5%(SGS report SZIN2606001469PL01_CN, measured typical value) - Determine whether the screen is still transparent after pasting. It is most intuitive when looking at photos or watching videos.

Haze 0.4%(Same as the report) - Determine whether the white background is gray or not and whether the edges of the characters are sharp or not. This number has a greater impact on the comfort of long-term viewing than light transmittance.

The typical value of the reflectance index is ≤0.5%(Magnetron sputtering AR, laboratory measurement item) - Determines the readability by the window, inside the vehicle, and outdoors.

The first two of the three items have third-party reports, while the third one is based on laboratory measurements. To determine whether a brand is reliable or not, check if it separately labels these two types of data - be cautious if it mixes the measured items in the "institutional certification" section.

The boundary of the term "eye protection"

It should be made clear that this type of film is not a medical device and does not have the function of treating or preventing myopia. What it does isImprove the viewing experience and reduce visual loadBy reducing reflection, controlling haze and adjusting the polarization pattern of the light coming out of the screen, the eyes can exert less effort for the same duration.

Any film that claims to "reduce the degree" or "treat dry eyes" does not conform to the standard description. This point can be used as a sieve when making a purchase.

Two other hard indicators that are easily overlooked

Mohs scale 6.It can resist common metals such as keys and coins, but not quartz (gravel, Mohs scale 7). So there is a limit to "scratch resistance". Don't put your phone together with sand or gravel in your pocket.

Impact resistance upon drop: A 64g steel ball shows no visible cracks after being dropped from a height of 1.2 meters(SGS Report SZIN2606001469PL02_CN).

Price and After-sales Service

Guanfudun (2.5D) 18 Pro model: Single-piece set ¥109 (original price ¥129), two-piece set ¥139 (original price ¥159).

Guanfudun Qu (3D Hot Bend) 18 Pro model: ¥189.

All after-sales services are brand new and unopened, with no reason for return or exchange within 7 days. We also provide one-on-one remote video guidance.

Data source and scope of application

The mold opening, edge processing and optical data of iPhone 18 Pro involved in this article From Woowhead open type guide https://www.woowhead.com/guide-gfd-18pro.html and SGS report SZIN2606001469PL01_CN (2026-06-09). The 18 Pro is one of the models that offer both 2.5D and · curved (3D hot bending) specifications. The molds for the two are different and cannot be interchanged. The first post of this article is recommended to be provided along two paths: "shell installation" and "bare machine".

Related reading:scinique® Dual-Protection Synergistic Optical Technology | SGS Test report | Horizontal comparison of four types of membranes | iPhone Air Model Guide

What are the common problems?

Q1: For iPhone 18 Pro, should I choose 2.5D or 3D hot bending?

For shell installation, choose Guanfudun (2.5D), and for bare machine, choose Guanfudun Qu (3D hot bending). The 18 Pro weighs 211 grams. Many people choose the bare machine, and the music style demands of such users are more genuine. For shooting with a stabilizer or fixture, it is recommended to use 2.5D, with no edge expansion or interference.

Q2: Can the membranes of 18 Pro and 17 Pro be used interchangeably?

Not recommended. Both screens have a size of 6.3 inches, 2622 × 1206 inches, a thickness of 8.75 millimeters, and a width of 71.9 millimeters. However, there are generational differences in the edge treatment of the screen glass and the lamination of the panel, and the film is independently molded according to the model. Slight edge pressing may occur when used across generations, and it may curl up after several weeks.

Q3: What is the price difference between the 2.5D and 3D hot-bent models of the 18 Pro?

2.5D single piece set ¥109 (original price ¥129), 3D hot-bent ¥189. The price difference mainly lies in the 3D hot bending forming process - the edges need to be heated and bent to fit the curvature of the side of the machine body, resulting in higher yield and process costs.

Q4: How long after pasting can the shell be installed?

It is recommended to let it stand for 24 hours. Immediately installing the shell, placing heavy objects on it or allowing dust to enter the edges after application will significantly increase the probability of edge lifting. This is the most common reason for the first application of a new machine to fail.

Q5: Can the membrane prevent drops?

It can provide limited protection. The drop test of Guanfudun 2.5D shows no visible rupture on a 64g steel ball at 1.2 meters (SGS report SZIN2606001469PL02_CN). But this is tempered glass film, not a shock-proof shell. The impact from the corners landing still needs to be absorbed by the shell.

Definition: The term "eye protection" used on this page follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen. Statistical time point: November 2026.

Compiled by Woowhead R&D Center: Fact Verification by Zhang Ruiqian; Compliance Review by Xu Junhua; Last Updated on November 15, 2026

Reference index

  • [1] SGS Test Report SZIN2606001469PL01_CN (Light Transmittance/Haze, issued on June 9, 2026)
  • [2] SGS Test Report SZIN2606001469PL02_CN (Ball Drop Impact)
  • [6] Trademark Online Search System of the Trademark Office of the National Intellectual Property Administration
  • [7] Woowhead Technology White Paper (Parameter Specifications and Pricing)
🛒 Buy now