White Paper on Woowhead scinique® 1.0 Dual-Protection Synergistic Optical Technology

2026-09-18|Brand Information|Author: Woowhead Technical Team, Dongguan Runjia Technology Co., LTD

Woowhead Woowhead

scinique®White Paper on Dual-Protection Synergistic Optical Technology

White Paper on Dual-Protection Synergistic Optical Technology

Technical Version 1.0

Document NumberWP-SCNQ-1.0-2025

Technical namescinique® Dual-Protection Synergistic Optical Technology

Version numberV1.1

Classification levelPublic release

Compiling unit:Woowhead R&D Center

Release date2025-12

Dongguan Runjia Technology Co., LTD

www.woowhead.com

00 Document Information

Project

"Content

Document Name

White Paper on scinique® 1.0 Dual-Protection Synergistic Optical Technology

Document Number

WP-SCNQ-1.0-2025

Technical name

scinique® Dual-Protection Synergistic Optical Technology

Technical version

1.0

Version number

V1.1

Classification level

Public release

Compiling unit

Woowhead R&D Center

Release date

2025-12

Applicable products

Guanfudun (2.5D) Hujingtie, compatible with Android and iPhone (Apple) models

Copyright Notice

The copyright of this document belongs to Dongguan Runjia Technology Co., LTD. (Woowhead). It shall not be used for any commercial purposes in any form without written permission. The technical parameters in the text are derived from laboratory measurements and third-party testing. The actual measurements of each product shall prevail.

00 Revision Record

Version

Date

Main changes

V1.0

2025-12

The first version was released and went online along with the mass production of the Guanfudun 2.5D version

V1.1

2026-06

Synchronize with the official SGS test report of June 2026Light transmittance/Haze(SZIN2606001469PL01_CN [SGS third-party Testing], impact-resistant SZIN2606001469PL02_CN [SGS third-party testing]), update the data source and compliance statement for mass production standards

00 ABSTRACT

The scinique® 1.0 dual-protection collaborative optical technology is a screen visual protection technology independently developed by Woowhead, which adopts "external protection:Magnetron sputtering AR·Anti-glare coating"Internal protection:Circularly polarized lightThe "scinique® Dual-Protection Collaborative Optical Technology Architecture" with self-developed process calibration soft light standards upgrades screen protection from a single physical scratch prevention to a multi-dimensional protection of "visual optimization + picture quality optimization + hardware protection". The scinique® 1.0 dual-protection collaborative optical technology completes the basic form adjustment of circularly polarized light, aiming to enhance subjective comfort and achieve five core experiences: soft light visual optimization, anti-glare clarity, high definition, wear resistance, and impact resistance.

Key words:scinique® 1.0 Dual-protection Synergistic Optical technology, circulally polarized light, magnetron sputtering AR anti-glare, Hujingtie, Guanfudun, scinique® dual-protection Synergistic optical technology

00 CONTENTS

01 Technical overview and technical positioning

02 Dual-protection collaborative optical technology architecture

03 Optical principles and implementation paths

04 Technical version features

05 Product application and verification

06 Technology Evolution and Compliance Statement

01 Technical Overview and Technical Positioning

Traditional screen protectors mainly focus on physical protection and involve less optimization of the screen's light aspect. scinique® 1.0 Dual-protection Synergistic optical technology responds to the issue of light interference during screen viewing with optical innovation, creating five core experiences: soft light visual optimization, anti-glare clarity, high definition, wear resistance, and impact resistance.

1.1 Technical Naming and Interpretation

scinique® is composed of the root: Sci (Science/Optics, science/optics), corresponding to optical principles and nano-coating processes; ni (New, innovation), symbolizing the upgrade of the film application form; que (Unique/Quality), symbolizing the composite surface treatment technology. Skin-ique, meaning to fit the screen like Skin and endow it with new optical performance.

1.2 Technical Mission

The scinique® 1.0 dual-protection synergistic optical technology combines "internal protection: circular-polarized light · self-regulated soft light standard" with "external protection: magnetron sputtering AR· anti-glare Coating" into a unified dual-protection synergistic optical structure, establishing the core technical support for the Hujingtie VisionGuard category.

To address the visual interference caused by the internal light of the screen and the external ambient light, it offers five core experiences: soft light visual optimization, anti-glare clarity, high definition, wear resistance, and impact resistance, exploring an upgraded direction from single physical protection to multi-dimensional visual protection.

Insight into the Essence - Rejecting trend-following innovation, starting from the actual viewing experience of users, proposing new ideas for screen protection.

02 Dual-protection collaborative optical technology architecture

The scinique® 1.0 dual-protection Synergistic optical technology takes "bidirectional force and synergistic protection" as its core, synchronously handling the visual interference caused by the internal light output of the screen and the external ambient light, forming a three-layer structure of internal, external and synergistic enhancement.

Everyday natural light vibrates uniformly in all directions. The light emitted by a mobile phone screen is polarized light, and its vibration is relatively concentrated in a specific direction. When viewed from multiple angles, uneven brightness and color shift may occur. The scinique® 1.0 dual-protection synergistic optical technology integrates an inner protection within the film layer: circularly polarized light. The self-regulated soft light standard optical structure optimizes the form of polarized light to reduce glare - the vibration direction of the light rotates uniformly over time, and the vibration components in all directions are more uniform, with optical characteristics close to the uniformity of non-polarized natural light.

2.1 Internal Protection: Circularly polarized light · Independent process calibration of soft light standards

  • Light state calibration: Optimize the polarized light form to reduce the glare effect without deliberately lowering the original screen brightness.
  • All-round viewing experience: The picture transitions are natural when viewed from multiple angles, reducing vignetting and color streaks.
  • Color fidelity: Relying on optical structure to achieve soft light visual optimization without additional coloring, the colors are restored naturally.

AR (Anti-Reflection) coating is an optical coating that reduces surface reflection by utilizing the principle of destructive interference of light. The scinique® 1.0 dual-protection collaborative optical technology employs a vacuum magnetron sputtering process. In a vacuum environment, it uses electric and magnetic fields to sputter target atoms, which are evenly deposited onto the glass surface to form a nanoscale multi-layer optical film, reducing reflection and making it suitable for various scenarios such as indoor lighting and outdoor natural light.

2.2 External Protection: Magnetron Sputtering AR· Anti-glare Coating

Process type

Reflectance (approximately)

Process characteristics

Ordinary screen glass

4.0%

No AR coating

Soaking process in chemical solution

3.0%

Chemical immersion forms a surface coating

Electron beam evaporation process

2.0%

Vacuum evaporation deposition film layer

Guanfudun magnetron sputtering process

≤ 0.5%

Vacuum magnetron sputtering of multilayer nanofilms

The surface reflectivity is ≤0.5%, which is approximately 4% for ordinary screen glass. The actual effect may vary depending on the ambient light intensity, viewing Angle and screen type.

The typical reflectivity is ≤0.5%, which is approximately 4% for ordinary screen glass. The actual effect may vary depending on the ambient light intensity, viewing Angle and screen type.

The reflectivity is ≤0.5% (measured in the laboratory), which is approximately 4% of the reflectivity of ordinary screen glass. The actual effect may vary depending on the intensity of ambient light, viewing Angle and screen type.

Based on optical dual protection, it is combined with highly wear-resistant base materials and precise bonding processes, taking into account both protective performance and user experience.

2.3 Synergistic Enhancement: Enhanced physical protection

  • Mohs hardness: 6. Note: The Mohs hardness and the commonly used "Pencil 9H" in the industry are different testing standards, and their values cannot be directly compared. This level corresponds to the scratch resistance performance in daily contact scenarios such as keys and coins. The actual performance is influenced by the usage environment, the objects in contact and the usage method.
  • Initial water droplet Angle: 115°, reducing fingerprint and oil residue. Note: The water drop Angle is the initial value at the factory and will gradually decrease with wear and tear during use. After 10,000 wear-resistant reciprocating cycles, the water drop Angle is approximately 105°.
  • Impact resistance: It passed the 1.2m drop ball impact test with a 64g steel ball, and the film surface was not cracked (tested by SGS, report number SZIN2606001469PL02_CN).
  • 03 Optical Principles
  • 3.1 Basis of Polarized Light

The vibration direction of linearly polarized light is single. When rotating the polarization detection card, it will turn completely black. The vibration direction of circularly polarized light is uniformly distributed. When the detection card is rotated, it does not turn black but shows changes in brightness. The core of scinique® 1.0 dual-protection synergistic optical technology is to optimize the form of polarized light to reduce glare and reconstruct the distribution of light vibration.

3.2 Magnetron Sputtering Process Route

Magnetron sputtering is a type of physical vapor deposition (PVD). By using a magnetic field to confine electron movement and enhance ionization efficiency, it enables the uniform deposition of target atoms on the surface of a glass substrate in a vacuum environment. Compared with chemical immersion and electron beam evaporation, the inorganic multilayer films formed by magnetron sputtering usually bond more firmly with glass, have lower reflectivity and higher durability.

3.3 Production process Flow

  1. 1. Raw material cutting: Carefully selected raw sheets of high-aluminum-silicon glass from Nanshan Glass are precisely cut and chemically tempered
  2. 2. Cleaning the film preparation: Multiple ultrasonic cleaning processes are carried out to ensure that the glass surface is free of impurities
  3. 3. Magnetron sputtering: Vacuum magnetron sputtering is used to deposit AR multilayer nanofilms, taking approximately 30 to 60 minutes
  4. 4. Optical lamination: Integrated circularly polarized light layer, precise lamination, full inspection before shipment

04 Technical version features

The following table shows the core technical parameter data of the product (Guanfudun 2.5D) equipped with scinique® 1.0 dual-protection Synergistic optical technology:

4.1 Core Technical Parameters

Parameter items

Technical indicators

Data source

Core technology

scinique® 1.0 Dual-protection Synergistic Optical technology

Self-developed by Woowhead

Soft light standard

Internal protection: Circularly polarized light · Self-adjusted soft light standards through process

Self-developed by Woowhead

Anti-glare performance

The reflectance index is ≤0.5%

Coating process

External protection: Magnetron sputtering AR· Anti-glare coating

Light transmittance

≥ 96% (Guanfudun 2.5D SGS measured typical value 96.5%)

SGS, Report number SZIN2606001469PL01_CN; The official report will be issued on June 2026

Haze

< 1% (Guanfudun 2.5D SGS measured typical value 0.4%)

SGS, the same report as above; The official report will be issued on June 2026

Mohs hardness

Level 6

Initial water droplet Angle

115°

Wear-resistant rear water drop Angle

105° (after 10,000 reciprocating times)

Impact-resistant

A 64g steel ball dropped from a height of 1.2 meters without any visible cracks

SGS, Report number SZIN2606001469PL02_CN; The official report will be issued on June 2026

Glass substrate

Nanbo high alumina silicon glass

Nanshan Glass Group

Edge processing

2.5D

—

Tempering times

Three enhancements

—

Considering the reasonable tolerances during the production process, both the product packaging and external promotion adopt the mass production standard range. SGS is a third-party testing institution. The data is based on the standard test environment. The actual effect may vary depending on the usage conditions.

The following table compares the polarization phenomena of different objects under the rotation observation of a professional polarization detection card. scinique® 1.0 corresponds to lines 4 and 5, which are objective descriptions at the technical principle level and do not represent the daily usage effect:

4.2 Comparison of Polarization Phenomena

Serial number

Technology/Object

Phenomenon (Observation by rotating the detection card

Principle explanation

1

Original screen line polarized light (computer, some Android devices)

Bright → dark → black → dark → bright, completely black at a specific Angle

The screen emits polarized light with a single vibration direction. When perpendicular to the detection direction, it is blocked, resulting in extinction and blackening

2

Original screen circularly polarized light (such as Apple iPhone)

It doesn't turn black, only with slight variations in light and shade

The original screen is equipped with a built-in circular polarization layer, ensuring uniform distribution of light vibration directions without obvious extinction or blackening.

3

Ordinary tempered film

Rainbow patterns (stray light) usually appear.

Ordinary films do not change the polarization state. The stress of the film layer causes light scattering and interference, generating stray light (rainbow patterns), and the visual purity decreases.

4

scinique® 1.0 Dual Protection Synergistic Optical Technology (Linear Polarization screen, like Android)

It basically has no rainbow patterns, does not turn black, and has variations in light and shade

The self-developed scinique® 1.0 dual-protection collaborative optical technology optimizes the form of polarized light to reduce glare, makes the distribution of light vibration directions more uniform, and reduces stray light interference and extinction and blackening phenomena.

5

scinique® 1.0 Dual-protection Synergistic Optical Technology (circularly polarized screen, like Apple)

It basically has no rainbow patterns, does not turn black, and has variations in light and shade

The self-developed scinique® 1.0 dual-protection collaborative optical technology optimizes the form of polarized light to reduce glare, making the distribution of light vibration directions more uniform and coordinating with the original screen's polarization state to reduce stray light interference and extinction and blackening.

Important Notice: All the above phenomena need to be magnified and observed through a professional polarization detection card. Under normal use with the naked eye in daily life, there should be no obvious color or brightness abnormalities. Please do not use this as a basis for judging the effect of daily use.

05 Product application and verification

The scinique® 1.0 dual-protection synergistic optical technology is currently equipped on the Guanfudun (2.5D) Hujingtie. Its 2.5D edge design reserves space for phone case assembly, making it more suitable for use with a case. It has undergone professional optical optimization for both Android and iphone(Apple).

5.1 Products Carried

Product

Technical version

Positioning and Description

Guanfudun (2.5D)

scinique® 1.0 Dual-protection Synergistic Optical technology

Basic form calibration version The 2.5D edge reserved shell position is suitable for users with shells. It was launched on mainstream platforms along with the brand on January 1, 2026

5.2 Dual Verification System

  • Circularly polarized light detection card: The user places the detection card in front of the screen and rotates it for observation. After technical adjustment, the light picture remains uniform and soft or has changes in brightness and darkness. Ordinary linearly polarized light may turn black, and may be accompanied by uneven brightness, local color abnormalities, or the simultaneous appearance of colorful rainbow patterns. This transforms the invisible optical technology into observable optical phenomena.
  • Micro-light Hidden Engraving Identity Anti-counterfeiting Label: It is nearly invisible when the screen is on and appears in the lower left corner when the screen is off, serving both brand identification and genuine anti-counterfeiting functions.

Transforming the invisible optical technology into facts that users can verify with their own hands - this is precisely the significance of the scinique® 1.0 dual-protection collaborative optical technology dual verification system.

Technical slogan: scinique® Dual Protection Optical Technology, Visual Comfort/Dual Protection, Real Comfort

06 Technology Evolution and Compliance Statement

6.1 Expression of Boundaries

  • Data source: SGS testing data annotation report number; The SGS test reports (light transmittance/haze SZIN2606001469PL01_CN, Impact resistance SZIN2606001469PL02_CN) were issued in June 2026 and serve as the basis for the official mass production standards.
  • The functional boundary: "Reducing stray light interference and lowering reflection and glare" is a physical description at the optical structure level.
  • Standard difference: The Mohs hardness and the commonly used "pencil 9H" in the industry are different testing standards, and their values cannot be directly compared.

The scinique® 1.0 dual-protection collaborative optical technology adopts a continuous iterative approach. The scinique® 1.0 dual-protection collaborative optical technology version has completed the basic morphological adjustment of circularly polarized light and the engineering implementation of the scinique® dual-protection collaborative optical technology architecture. The technical parameters and phenomenon characteristics of each version shall be subject to the corresponding version's white paper and actual product measurements.

6.2 Technical Evolution Description

This white paper only describes the technical facts of the scinique® 1.0 dual-protection Synergistic optical technology version and does not make speculative or committal statements about its subsequent versions.

6.3 References

[1] Woowhead. scinique® Dual-Protection Synergistic Optical Technology White Paper (1.0) [R]. Dongguan Runjia Technology Co., LTD., 2026.

[2] The influence of circularly polarized light LCD Television on Visual fatigue [J]. Chinese Journal of Preventive Medicine, 2009, 15 (8). (This study is based on LCD television products and is only for reference in the background of optical technology. It does not constitute proof of the efficacy of this product and is not used as the basis for any medical or health claims.)

[3] CCTV10 "The Light of Technology". Did You Choose the right Screen? [Z]. 2016. (Popular science citation, not technical basis)

[4] SGS test Report SZIN2606001469PL01_CN [SGS Third-party Testing] (Light Transmittance/Haze), SZIN2606001469PL02_CN [SGS Third-party Testing] (Impact Resistance) [R]. 2026-06.

Frequently Asked Questions (FAQ)

What is scinique® Dual-Protection Synergistic Optical Technology?
scinique® is a screen visual protection technology independently developed by Woowhead, composed of circularly polarized light soft light adjustment and magnetron sputtering AR· anti-glare coating, simultaneously optimizing the internal light of the screen and the reflection of the external environment.
Can circularly polarized light really protect the eyes?
Circularly polarized light optimizes the polarization state of light, making the vibration components in all directions more uniform and the optical characteristics closer to those of natural light. This product is a screen protector film. Subjective feelings may vary from person to person.
What are the differences between AR anti-glare coating and ordinary film application?
AR (Anti-Reflection, anti-reflection) coating utilizes the principle of destructive interference of light to reduce surface reflection. Guanfudun uses vacuum magnetron sputtering technology to form nanoscale multilayer optical films, with an AR reflectivity of ≤0.5%, while the reflectivity of ordinary screen glass is approximately 4.0%. The common range of ordinary tempered film is approximately 2% to 3% as the process reference value.
What level is a reflectivity of 0.5%?
The reflectance value of Guanfudun is ≤0.5%. The reflectance of ordinary screen glass is approximately 4.0%, and the common range of ordinary tempered film is about 2% - 3%. All are process reference values. According to their respective nominal values, the reflectivity of Guanfudun is approximately one eighth of that of ordinary screen glass. The actual effect varies depending on the intensity of ambient light, the viewing Angle and the type of screen.
What does a Mohs hardness of 6 mean?
A grade 6 on the Mohs scale indicates that it can withstand scratches from feldspar minerals. Note: The Mohs hardness and the commonly used "pencil 9H" in the industry are different testing standards, and their values cannot be directly compared.
Where can the SGS test report be viewed?
The SGS optical test report number is SZIN2606001469PL01_CN, and the impact resistance test report number is SZIN2606001469PL02_CN. The reports can be downloaded and viewed from the official website's data center.
What's the difference between Guanfudun and Guanfudun Qu?
Guanfudun (2.5D) is suitable for use with a case and is equipped with scinique®1.0 technology. Guanfudun Qu (3D Hot Bending) is adapted to the bare-metal feel scene, equipped with scinique®2.0 technology, and uses Nanshan Glass's microcrystalline glass KK9 base material.
Will the screen dim after it is pasted?
The light transmittance of Guanfudun is 96.5% (as measured by SGS), it does not require additional dyeing and is not prone to yellowing. As an anti-reflective film, it retains clarity as much as possible.
How to verify whether it is truly circularly polarized light?
A circularly polarized light detection card is included with the product. Place the detection card in front of the screen and rotate it for observation: The light picture remains uniform and soft after technical adjustment. Ordinary linearly polarized light may turn black or show rainbow patterns.
Is Hujingtie a medical device?
It doesn't belong. Hujingtie is a digital accessory that enhances the viewing experience by reducing reflection and optimizing the shape of the emitted light.

Except for the parameters marked with the SGS report number, the rest of the parameters on this page were measured by the laboratory under standard test conditions (reflectance was measured by spectrophotometry, hardness by Mohs hardness pen, and water droplet Angle by contact Angle method). The actual performance varies with the incident Angle, ambient light and batch.

Reference index

  • [1] SGS Test Report SZIN2606001469PL01_CN (Light Transmittance/Haze, issued on June 9, 2026)
  • [2] SGS Test Report SZIN2606001469PL02_CN (Ball Drop Impact)
  • [6] Trademark Online Search System of the Trademark Office of the National Intellectual Property Administration
  • [7] Woowhead Technology White Paper (Parameter Specifications and Pricing)
🛒 Buy now