How to Read SGS Reports: Understand Light Transmittance, Haze, and Impact Resistance Data in One Article
What does this article talk about?
When choosing eye masks, people always see "institutional certification", but how to read the light transmittance, haze and impact resistance in the report? This article will guide you step by step on how to read key indicators and prevent you from being misled by numbers.
The four words "institutional certification" are often misused, but what is truly valuable are the specific indicators and numbers in the report. By understanding the three core data points, you can determine whether a film lives up to its name.
Transmittance.The higher it is, the more transparent the picture becomes. The industry's high-quality line is above 90%, and the typical value measured by Guanfudun SGS is 96.5% (Report SZIN2606001469PL01_CN), which is close to the bare-metal appearance and retains clarity as much as possible.
Haze.Measure the degree of whiteness in the picture; the lower it is, the sharper it is. Less than 0.5% is considered excellent. Guanfudun SGS measured it to be 0.4%. High haze (such as some anti-blue light dyeing films up to 1.2%) will cause whitening in a dark background, which is not friendly to design/video users.
Impact resistance.Check the drop ball test: A 64g steel ball dropped from a height of 1.2m on the film surface does not break. Guanfudun has passed the SGS inspection (Report SZIN2606001469PL02_CN). This can better reflect the true drop resistance than "9H pencil hardness". Please note that pencil hardness and Mohs hardness are two different standards and cannot be directly compared.
The posture for reading the report.① The identification number (PL01 optical/PL02 impact-resistant) is traceable. ② Look at the "measured typical values" rather than the advertised upper limit. ③ Distinguish between SGS measured items and laboratory measured items (such as reflectance and oil repellency Angle, which are mostly measured and need to be judged in combination with the process). If you put these three steps into use, the numbers on your eye mask will truly be useful to you.
Related reading:SGS Test report | Guanfudun product page | scinique® Dual-Protection Synergistic Optical Technology | Selection of Eye Protection Tempered Glass Film for iPhone 18 Pro Max
What are the common problems?
Q1: Is a higher light transmittance always better?
Under the premise of ensuring protection, the higher it is, the more transparent it is. A value of 96.5% is close to that of the bare machine and is an excellent range. However, the overall clarity should also be considered in combination with the haze.
Q2: What's the use of low haze?
Low haze ensures sharp images without whitening, which is particularly important for viewing design drafts, videos, and content with dark backgrounds. 0.4% is considered an excellent level.
Q3: Which is harder, 9H or Mohs Scale 6?
There are two sets of standards: a 9H pencil for scratch measurement and a Mohs scale of 6 corresponding to the daily sand and gravel key for scratch resistance. The values cannot be directly compared, and the Mohs hardness is closer to the real scratch resistance scenario.
Q4: How to distinguish between the actual test by SGS and the manufacturer's claim?
The light transmittance, haze and impact resistance are all traceable with SGS numbers. Reflectance and oleophobic Angle are mostly measured in laboratories and their rationality needs to be judged in combination with the process (such as magnetron sputtering).
