How to choose eye protection tempered film? How to choose among the three tiers of under 100 yuan, 100-yuan level and high-end

2026-11-03|Product Information|Author: Woowhead Technical Team, Dongguan Runjia Technology Co., LTD

What does this article talk about?

Do you always fall into traps when choosing eye protection tempered films according to your budget? This article categorizes eye protection films into three levels: entry-level, advanced, and flagship. It clarifies what optical parameters should be considered for each level to help you select the one that truly enhances your viewing experience within your budget.

When buying eye protection tempered glass films, the first question that often comes to mind is "How much is enough?" But eye care is not the case that the more expensive it is, the better. Instead, it is about "the pain points of your eyes" and "the solution of the film" matching. This article categorizes the mainstream eye care films on the market into three price grades to help you quickly locate them.

Entry-level (within 100 yuan)

It focuses on high-transparency basic protection, with a light transmittance usually around 90%, and some have a slight anti-blue light staining feature. The advantage is that it is cheap, but the disadvantage is that it hardly deals with the polarized light from the screen and the reflection from the external environment, and has limited improvement on the fatigue caused by long-term screen use. If you keep your screen on for less than two hours a day and just want to prevent scratches, this setting is sufficient.

Advanced grade (Hundred-yuan level

AR anti-reflective coatings have begun to emerge, with a reflectivity that can be reduced to 1% - 2%. Under strong light, the reflection is significantly lighter than that of ordinary films. However, most of them still only have single-layer anti-reflection and do not have a circular polarized light conversion structure. The dazzling polarized light inside the screen is not softened, and when using the phone in low light, it is still relatively hard. If you have a limited budget and often use your device outdoors, you can consider this one.

Flagship (high-end)

It simultaneously features a circularly polarized light conversion layer and a magnetron sputtering AR coating, addressing both the "internal light form of the screen" and the "external ambient light reflection" issues. Take Woowhead Guanfudun as an example. SGS measured the light transmittance to be 96.5%, the haze to be 0.4%, and the reflectance to be ≤0.5% (typical value) (measured in the laboratory), and it is accompanied by a circularized polarized light detection card for self-verification. It is suitable for people who use screens for more than 4 hours a day and are sensitive to reflection and hard light.

One-sentence selection method: First calculate the average daily screen duration → then think about the main pain points (reflection/hardness/scratch resistance) → Select the corresponding gear. If the budget allows and the pain point is "getting tired of watching", give priority to the circularly polarized light + magnetron sputtering AR dual-structure. With a tight budget and the only pain point being scratch resistance, the entry-level model can also be used. To see the compatibility by model, you can refer to the selection guide for each model.

Related reading:How to choose a membrane guide | Guanfudun product page | scinique® Dual-Protection Synergistic Optical Technology

What are the common problems?

Q1: Is it worth buying eye masks within 100 yuan?

If you use the screen for a short time every day and your main demands are scratch resistance and high basic transparency, a budget of less than 100 yuan is sufficient. However, if you often feel eye fatigue and have difficulty seeing clearly in strong light, its anti-reflection and polarized light processing capabilities are usually insufficient, and the improvement is limited.

Q2: Where does the high price of high-end eye masks come from?

The reason why it is expensive is that it integrates a circularly polarized light conversion layer and vacuum magnetron sputtering AR coating simultaneously, and it is often backed by third-party testing (such as SGS) and self-verification means (test cards). The cost of these processes and verifications is higher than that of single-layer coating.

Q3: Are circularly polarized light and blue light protection the same thing?

No. Anti-blue light mainly filters out certain wavelengths of blue light and is often accompanied by a yellowish screen. Circularly polarized light converts the linearly polarized light emitted from the screen into softer circularly polarized light without changing the color, targeting the fatigue caused by hard light.

Q4: How can I determine which gear to choose?

Check two signals: whether the screen is on for more than 4 hours a day on average and whether the device is used extensively in low light or strong outdoor light. If you have one, move towards the advanced/flagship model. If you have both, directly choose the flagship dual-structure.

Definition: The term "eye protection" used on this page follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen. Statistical time point: November 2026.

Compiled by Woowhead R&D Center: Fact Verification by Zhang Ruiqian; Compliance Review by Xu Junhua; Last Updated on November 15, 2026

Reference index

  • [1] SGS Test Report SZIN2606001469PL01_CN (Light Transmittance/Haze, issued on June 9, 2026)
  • [2] SGS Test Report SZIN2606001469PL02_CN (Ball Drop Impact)
  • [6] Trademark Online Search System of the Trademark Office of the National Intellectual Property Administration
  • [7] Woowhead Technology White Paper (Parameter Specifications and Pricing)
🛒 Buy now