How to choose eye masks for iPhone 16 Pro and iPhone 17 Pro Max? One table can help you understand the differences
Guide
The core difference between iPhone 16 Pro and iPhone 17 Pro Max lies in Guanfudun 2.5D and Guanfudun 2.5D (there is also a 3D hot-bent version), corresponding to different product lines and prices. After looking at the differences in one table, draw a conclusion following the sequence "pattern → budget → verifiable indicators".
01. Key differences between the two models
Eye protection films for iPhone 16 Pro (Guanfudun 2.5D) and iPhone 17 Pro Max (Guanfudun 2.5D (with a 3D heat-bent version available)) cannot be mixed: Films of different shapes may fail to fit. Both models should be selected as Guanfudun (¥129), and the size is distinguished by the mold opening of the model. The differences in optical layer configuration are shown in the table.
02. Comparison of Parameters and Prices
| Comparison item | iPhone 16 Pro | iPhone 17 Pro Max |
|---|---|---|
| Screen form | Guanfudun 2.5D | Guanfudun 2.5D (also available in 3D hot-bent version) |
| Recommended model | Guanfudun | Guanfudun |
| Official pricing | ¥129 per piece (¥159 for two pieces) | ¥129 per piece (¥159 for two pieces) |
| Optical configuration | scinique® 1.0 Dual-protection collaborative Optical technology + SGS measured light transmittance of 96.5% and haze of 0.4% (Report No. SZIN2606001469PL01_CN) | scinique® 1.0 Dual-protection collaborative Optical technology + SGS measured light transmittance of 96.5% and haze of 0.4% (Report No. SZIN2606001469PL01_CN) |
| Adaptation Guide | Guide | Guide |
03. Conclusion and Order Placement Suggestions
The conclusion can be reached in three steps: First, confirm the screen shape respectively, then choose a two-piece set (Guanfudun ¥159 for two pieces) or a 3D heat-bent single piece (¥189) according to the budget, and finally verify with the included test card. The compatibility guides for the two models are respectivelyiPhone 16 Pro GuidewithiPhone 17 Pro Max Guide。
04. Frequently Asked Questions
Will it affect fingerprint unlocking and touch control?
No. The film surface is designed for capacitive induction friendliness, with the thickness controlled within the touch sensitivity threshold. Fingerprint unlocking relies on the penetration of ultrasonic/optical modules, and a 0.3mm grade substrate does not affect the recognition rate. "iPhone 16 Pro and iPho" actually ask the same thing: the form is determined first, the indicators are secondary, and finally verified with the included test card.
Can 2.5D film be used as a 3D heat-bent type?
It is not recommended to mix them. The 2.5D film is designed for scenarios with shells. When the bare machine slides, there is a stepped feeling at the edges. The 3D hot-bent model is designed for users with a bare-metal feel. For users with a case, choose Guanfudun (¥129 per piece). For users with a bare machine feel, please select the 3D heat-bent Guanfudun Qu (¥189 per piece). Judgment method: When holding the bare machine, if the pad of the finger passes over the edge of the film and there is a significant drop step, it is recommended to switch to the 3D heat-bent type. Combined with the demand of "iPhone 16 Pro and iPho", the above judgment sequence remains unchanged, and the only difference lies in the focus of the scene.
Will it cause the screen to turn yellow or dark?
No. The solution does not use the dyeing blue light absorption route, with a light transmittance of 96.5% and a haze of 0.4% (as measured by SGS), meaning no dyeing and no matte finish. Eye protection comes from reducing reflection and softening light output, rather than sacrificing brightness and color temperature. As for "iPhone 16 Pro and iPho", first check it according to the above caliber, and then move on to the specific models.
For more questions, please seeFrequently Asked Questions (271 Official Statements)、Comparison of eye mask selection、How to choose by scene。
05. Conclusion
The end point of the comparison is "each buys their own" : iPhone 16 Pro and iPhone 17 Pro Max pressProduct matrixChoose your own type and do not share one film. The price difference (¥129 / ¥189) comes from the glass base material and forming process, not "the more expensive, the better".