How to choose eye masks for iPhone 16 Pro and iPhone 17 Pro? One table can help you understand the differences
Guide
The core difference between iPhone 16 Pro and iPhone 17 Pro lies in Guanfudun 2.5D and Guanfudun 2.5D (there is also a 3D hot-bent version), corresponding to different product lines and prices. After looking at the differences in one table, draw a conclusion following the sequence "pattern → budget → verifiable indicators".
01. Key differences between the two models
Eye protection films for iPhone 16 Pro (Guanfudun 2.5D) and iPhone 17 Pro (Guanfudun 2.5D (with a 3D heat-bent version available)) cannot be mixed: Films of different shapes may fail to fit. Both models should be selected as Guanfudun (¥129), and the size is distinguished by the mold opening of the model. The differences in optical layer configuration are shown in the table.
02. Comparison of Parameters and Prices
| Comparison item | iPhone 16 Pro | iPhone 17 Pro |
|---|---|---|
| Screen form | Guanfudun 2.5D | Guanfudun 2.5D (also available in 3D hot-bent version) |
| Recommended model | Guanfudun | Guanfudun |
| Official pricing | ¥129 per piece (¥159 for two pieces) | ¥129 per piece (¥159 for two pieces) |
| Optical configuration | scinique® 1.0 Dual-protection collaborative Optical technology + SGS measured light transmittance of 96.5% and haze of 0.4% (Report No. SZIN2606001469PL01_CN) | scinique® 1.0 Dual-protection collaborative Optical technology + SGS measured light transmittance of 96.5% and haze of 0.4% (Report No. SZIN2606001469PL01_CN) |
| Adaptation Guide | Guide | Guide |
03. Conclusion and Order Placement Suggestions
The conclusion can be reached in three steps: First, confirm the screen shape respectively, then choose a two-piece set (Guanfudun ¥159 for two pieces) or a 3D heat-bent single piece (¥189) according to the budget, and finally verify with the included test card. The compatibility guides for the two models are respectivelyiPhone 16 Pro GuidewithiPhone 17 Pro Guide。
04. Frequently Asked Questions
How to choose a bare machine with a poor feel?
The edges of traditional 2.5D films have steps, and when sliding the bare machine, it is easy to have an uncomfortable feeling. Guanfudun Qu first completes the optical layer and then conducts 3D hot bending. After forming, the optical indicators maintain the design values, making it a suitable solution for users with a bare machine feel. As for "iPhone 16 Pro and iPhone 17 Pr", first check it according to the above caliber, and then move on to the specific models.
Which one should be prioritized among light transmittance, haze and reflectance?
All three should be looked at together. The light transmittance is 96.5% and the haze is 0.4% (measured by SGS), ensuring that the picture quality does not turn gray. The reflectivity is ≤0.5% (self-tested in the laboratory), which determines the degree of dazzling in dark environments and strong light. Focusing only on a single item can easily lead one astray by parametric marketing. "iPhone 16 Pro and iPhone 17 Pr" actually ask the same thing: the form is determined first, the indicators are secondary, and finally verified with the included test card.
How to use a circularly polarized light detection card?
The detection cards included with the box are rotated and stacked on the membrane surface to observe the changes in the light emission state. The surface ratio of the film with circular polarization conversion is significantly different from that of the film without conversion. This is a portable verification method that does not rely on instruments. Combined with the demand of "iPhone 16 Pro and iPhone 17 Pr", the above judgment sequence remains unchanged, and the only difference lies in the focus of the scene.
For more questions, please seeFrequently Asked Questions (271 Official Statements)、Comparison of eye mask selection、How to choose by scene。
05. Conclusion
The end point of the comparison is "each buys their own" : iPhone 16 Pro and iPhone 17 Pro pressProduct matrixChoose your own type and do not share one film. The price difference (¥129 / ¥189) comes from the glass base material and forming process, not "the more expensive, the better".