Outdoor Strong light eye protection: Why is AR anti-reflection the key for outdoor Devices
What does this article talk about?
Is the phone screen all white and hard to see clearly in the sunlight? The core of outdoor eye masks is not to prevent scratches but to resist reflection. This article clearly explains how magnetron sputtering AR coating can reduce the reflectivity, allowing you to see clearly even outdoors.
The most annoying thing about using a phone outdoors is not scratches, but reflection - when sunlight hits the screen, the content is covered by your own reflection. You can only cover it with your hand and turn up the brightness to the maximum, which makes your eyes even more tired.
Reflectivity determines outdoor readability.The reflectivity of ordinary tempered film is about 4%, which is equivalent to the screen surface always being covered with a layer of "mirror". Magnetron sputtering AR coating utilizes the destructive interference of light to reduce the reflectivity to around 0.5% (Guanfudun typical ≤0.5%, as measured in the laboratory), significantly reducing reflection and making outdoor content clearer.
Why magnetron sputtering instead of soaking in chemicals?The reflectivity of the liquid immersion process is approximately 3%, and that of electron beam evaporation is about 2%, both of which are higher than those of magnetron sputtering inorganic AR. Magnetron sputtering coatings are denser and more uniform, have more stable anti-reflection properties, and are more resistant to daily wear and tear.
Outdoor scenes should also take into account transparency.Anti-reflection solves the problem of "unclear vision", but high haze will make the picture look white. Select the solution with a haze of less than 0.5% (measured by Guanfudun SGS at 0.4%), which will have less reflection and remain sharp under strong light.
Advice for frequent outdoor users: Take "reflectivity" as the first indicator, identify the magnetron sputtering AR process, and verify if there is third-party data support. Outdoor enthusiasts don't have to insist on circularly polarized light, but the dual-structure (circularly polarized light + AR) can take care of both low light and outdoor conditions at the same time, making it a more worry-free all-round solution.
Related reading:Guanfudun product page | scinique® Dual-Protection Synergistic Optical Technology | iPhone Air Model Guide | iPhone 18 Pro Max Model Guide
What are the common problems?
Q1: What parameters should be considered most when wearing outdoor eye masks?
Reflectance. It directly determines the readability under sunlight. Magnetron sputtering AR can reduce the reflectivity to around 0.5%, which is much lower than the approximately 4% of ordinary films.
Q2: In what aspects is magnetron sputtering AR better than chemical process?
It has a lower reflectivity (about 0.5% vs. about 3% for chemicals), a denser coating, and more stable and durable anti-reflection performance, making it a superior process route.
Q3: Do outdoor devices need circularly polarized light?
It's not mandatory, but the dual-structure can take care of both outdoor anti-reflection and dim and soft light simultaneously, making it a more versatile choice.
Q4: Is the reflectance claimed by the manufacturer reliable?
The nominal data needs to be judged in combination with the process. If there is third-party testing (such as SGS light transmittance/haze) and self-verification on the test card as evidence, the overall credibility will be higher.
