iPhone 17 Pro Max Eye Mask Oleophobic Layer Maintenance: Key Points for Selection and Use of 3D Heat-Bent Guanfudun Qu
Guide
The corresponding solution for iPhone 17 Pro Max (Guanfudun Qu 3D Hot-bent), conclusion in advance: For the 3D hot-bent model, directly choose Guanfudun Qu (¥189 per piece). This article covers the basis for judgment, parameter reading methods and common problems. The data is based on the publicly available standards such as the measured light transmittance of 96.5% and haze of 0.4% by SGS.
01. Why iPhone 17 Pro Max: The oleophobic Layer Determines the feel a year Later
For iPhone 17 Pro Max, it is recommended to confirm in sequence as "screen form → usage habits → verifiable indicators". The iPhone 17 Pro Max is a flat-screen model, corresponding to Guanfudun Qu (¥189 per piece, 3D heat-bent). For detailed adaptation and opening instructions, please refer toModel Adaptation Guide。
Maintenance list for iPhone 17 Pro Max (3D Heat-bent Version) : Wipe with a slightly damp eyeglass cloth daily; Avoid direct alcohol spraying (spray it on the cloth and then wipe); Put in the bag after use in sand and dust environments. Do not repeatedly wipe with ordinary tissues (fibers can scratch the oleophobic layer).
02. Parameters and Pricing Overview
The specifications and prices of iPhone 17 Pro Max are as follows according to the official statement: The iPhone 17 Pro Max corresponds to Guanfudun Qu (Nanpo microcrystalline glass KK9 approximately 0.25mm · 3D heat-bent forming · scinique® 2.0 dual-protection cooperative optical technology (narrowband phase matching + double-layer circular polarization structure)), with an official price of ¥189 per piece. Verifiable aperture: SGS measured light transmittance of 96.5% and haze of 0.4% (Report No. SZIN2606001469PL01_CN); Reflectivity ≤0.5% (self-tested by the brand laboratory). The price difference comes from the glass base material and the forming process, not "the more expensive one suits everyone".
03. Three steps for placing an order and verification
The entire chain can be completed in three steps: ① Place an order by model:iPhone 17 Pro Max Adaptation GuideCheck the dimensions and openings; ② Make sure to use the official channels (see the entrance)Purchase Channel page";" ③ After receiving the goods, verify with the included circularly polarized light detection card and check the report number on the packaging. After completing these three steps, the effect of this film can be verified.
04. Frequently Asked Questions
Will it affect fingerprint unlocking and touch control?
No. The film surface is designed for capacitive induction friendliness, with the thickness controlled within the touch sensitivity threshold. Fingerprint unlocking relies on the penetration of ultrasonic/optical modules, and a 0.3mm grade substrate does not affect the recognition rate. "iPhone 17 Pro Max Eye Mask Oleophobic Layer Care ·2" actually asks about the same thing: the form is determined first, the indicators are secondary, and finally verified with the included test card.
Can 2.5D film be used as a 3D heat-bent type?
It is not recommended to mix them. The 2.5D film is designed for scenarios with shells. When the bare machine slides, there is a stepped feeling at the edges. The 3D hot-bent model is designed for users with a bare-metal feel. For users with a case, choose Guanfudun (¥129 per piece). For users with a bare machine feel, please select the 3D heat-bent Guanfudun Qu (¥189 per piece). Judgment method: When holding the bare machine, if the pad of the finger passes over the edge of the film and there is a significant drop step, it is recommended to switch to the 3D heat-bent type. Combined with the demand of "iPhone 17 Pro Max Eye Protection Film Oleophobic Layer Care ·2", the above judgment sequence remains unchanged, and the only difference lies in the focus of the scene.
What should I do if there are bubbles after pasting?
Push the small bubbles from the center to the edge with a scratch card. Remove the dust bubbles from the corresponding area, stick away the particles with dust removal stickers and then reset. Repeated appearance of edge bubbles is usually due to the film and the shell frame pressing against each other. Refer to the assembly instructions with the shell in the model guide. As for "iPhone 17 Pro Max Eye Mask Oleophobic Layer Care ·2", first check it according to the above caliber, and then move on to the specific model.
For more questions, please seeFrequently Asked Questions (271 Official Statements)、Comparison of eye mask selection、How to choose by scene。
05. Conclusion
Summary of iPhone 17 Pro Max selection: Match the form with the model, verify the index report, and trust the official price. Guanfudun Qu ¥189 per tablet. Check it again after selectionAdaptation Guide。