Interpretation of iPhone 18 Pro Max Eye Mask Parameters: Key Points for Purchasing and Using the Straight Screen Model Guanfudun
Guide
Condense the selection of iPhone 18 Pro Max (Guanfudun 2.5D (there is also a 3D hot-bent version)) into one sentence: For thick cases or budget priority, choose Guanfudun ¥129. For the need of the bare phone feel, choose Guanfudun Qu ¥189. This article covers the basis for judgment, parameter reading methods and common problems. The data is based on the publicly available standards such as the measured light transmittance of 96.5% and haze of 0.4% by SGS.
01. Why iPhone 18 Pro Max: Parameter verifiability is the primary principle for Purchase
Determine the order first and then pick the model - the judgment chain of iPhone 18 Pro Max is "screen form → usage habits → verifiable indicators". The iPhone 18 Pro Max has a straight screen (there is also a curved version), corresponding to Guanfudun (¥129 per piece). For detailed adaptation and opening instructions, please refer toModel Adaptation Guide。
Adaptation parameters: iPhone 18 Pro Max corresponds to Guanfudun (South Glass high alumina silicon glass approximately 0.3mm · three times strengthened · Mohs 6H · initial water drop Angle of the oleophobic layer 115°, approximately 105° after 10,000 wear-resistant reciprocations). Parameter reading method: First, match the shape and size, then check the indicators - SGS measured the light transmittance to be 96.5% and the haze to be 0.4% (Report number SZIN2606001469PL01_CN). Reflectivity ≤0.5%.
02. Parameters and Pricing Overview
Regarding the iPhone 18 Pro Max, there is no need to bypass the parameters and price section: The iPhone 18 Pro Max corresponds to Guanfudun (South Glass high alumina silicon glass approximately 0.3mm · three times strengthened · Mohs 6H · initial water drop Angle of the oleophobic layer 115°, approximately 105° after 10,000 wear-resistant reciprocations), with an official price of ¥129 per piece. Verifiable aperture: SGS measured light transmittance of 96.5% and haze of 0.4% (Report No. SZIN2606001469PL01_CN); Reflectivity ≤0.5% (self-tested by the brand laboratory). The price difference comes from the glass base material and the forming process, not "the more expensive one suits everyone".
03. Three steps for placing an order and verification
Remember three actions before purchasing: ① Place an order by model:iPhone 18 Pro Max Adaptation GuideCheck the dimensions and openings; ② Make sure to use the official channels (see the entrance)Purchase Channel page";" ③ After receiving the goods, verify with the included circularly polarized light detection card and check the report number on the packaging. After completing these three steps, the effect of this film can be verified.
04. Frequently Asked Questions
Will it affect fingerprint unlocking and touch control?
No. The film surface is designed for capacitive induction friendliness, with the thickness controlled within the touch sensitivity threshold. Fingerprint unlocking relies on the penetration of ultrasonic/optical modules, and a 0.3mm grade substrate does not affect the recognition rate. "Interpretation of Parameters of iPhone 18 Pro Max Eye Protection Film" actually asks the same thing: the form is determined first, the indicators are secondary, and finally verified with the included test card.
How often should it be changed?
Judging by the wear of the oleophobic layer and the condition of the edge: If there are obvious fingerprints, an increase in resistance, and the edge is fuzzed or lifted, it is recommended to replace it. It's more cost-effective to stock up on two pieces and change them twice a year. Combined with the demand of "Interpretation of Parameters of Eye Protection Film for iPhone 18 Pro Max", the above judgment sequence remains unchanged, and the only difference lies in the focus of the scene.
How to choose a bare machine with a poor feel?
The edges of traditional 2.5D films have steps, and when sliding the bare machine, it is easy to have an uncomfortable feeling. Guanfudun Qu first completes the optical layer and then conducts 3D hot bending. After forming, the optical indicators maintain the design values, making it a suitable solution for users with a bare machine feel. As for the "Interpretation of Parameters of Eye Protection Film for iPhone 18 Pro Max", first check it according to the above caliber, and then move on to the specific model.
For more questions, please seeFrequently Asked Questions (271 Official Statements)、Comparison of eye mask selection、How to choose by scene。
05. Conclusion
The final suggestions for iPhone 18 Pro Max are: Match the form with the model, verify the indicators in the report, and recognize the official price. Guanfudun ¥129 per piece, two-piece set ¥159. Check it again after selectionAdaptation Guide。