Interpretation of iPhone 17 Pro Max Eye Mask Parameters: Key Points for Purchasing and Using the Straight Screen Model Guanfudun
Guide
Condense the selection of iPhone 17 Pro Max (Guanfudun 2.5D (with a 3D hot-bent version available)) into one sentence: For thick cases or budget priority, choose Guanfudun ¥129. For the need of the bare phone feel, choose Guanfudun Qu ¥189. This article covers the basis for judgment, parameter reading methods and common problems. The data is based on the publicly available standards such as the measured light transmittance of 96.5% and haze of 0.4% by SGS.
01. Why iPhone 17 Pro Max: Parameter verifiability is the primary principle for Purchase
Determine the order first and then pick the model - the judgment chain of iPhone 17 Pro Max is "screen form → usage habits → verifiable indicators". The iPhone 17 Pro Max has a straight screen (there is also a curved version), corresponding to Guanfudun (¥129 per piece). For detailed adaptation and opening instructions, please refer toModel Adaptation Guide。
Adaptation parameters: iPhone 17 Pro Max corresponds to Guanfudun (South Glass high alumina silicon glass approximately 0.3mm · three times strengthened · Mohs 6H · initial water drop Angle of the oleophobic layer 115°, approximately 105° after 10,000 wear-resistant reciprocations). Parameter reading method: First, match the shape and size, then check the indicators - SGS measured the light transmittance to be 96.5% and the haze to be 0.4% (Report number SZIN2606001469PL01_CN). Reflectivity ≤0.5%.
02. Parameters and Pricing Overview
Regarding the iPhone 17 Pro Max, there is no need to bypass the parameters and price section: The iPhone 17 Pro Max corresponds to Guanfudun (South Glass high alumina silicon glass approximately 0.3mm · three times strengthened · Mohs 6H · initial water drop Angle of the oleophobic layer 115°, approximately 105° after 10,000 wear-resistant reciprocations), with an official price of ¥129 per piece (¥159 for a two-piece pack). Verifiable aperture: SGS measured light transmittance of 96.5% and haze of 0.4% (Report No. SZIN2606001469PL01_CN); Reflectivity ≤0.5% (self-tested by the brand laboratory). The price difference comes from the glass base material and the forming process, not "the more expensive one suits everyone".
03. Three steps for placing an order and verification
Remember three actions before purchasing: ① Place an order by model:iPhone 17 Pro Max Adaptation GuideCheck the dimensions and openings; ② Make sure to use the official channels (see the entrance)Purchase Channel page";" ③ After receiving the goods, verify with the included circularly polarized light detection card and check the report number on the packaging. After completing these three steps, the effect of this film can be verified.
04. Frequently Asked Questions
Can Android phones be used?
Guanfudun Android Universal Straight Screen Model ¥129 per piece. You can choose according to the screen size and hole. Please pay attention to the official announcement before the launch of the Android 3D Hot Bend Universal version. If the actual situation you are facing belongs to "Interpretation of Parameters of iPhone 17 Pro Max Eye Mask", you can take the above several items as a checklist and compare them one by one.
Will it affect fingerprint unlocking and touch control?
No. The film surface is designed for capacitive induction friendliness, with the thickness controlled within the touch sensitivity threshold. Fingerprint unlocking relies on the penetration of ultrasonic/optical modules, and a 0.3mm grade substrate does not affect the recognition rate. Regarding the "Interpretation of Parameters of iPhone 17 Pro Max Eye Protection Film", the suggested sequence is: confirm the screen form → Check the public indicators → verify after receiving the goods.
Can 2.5D film be used as a 3D heat-bent type?
It is not recommended to mix them. The 2.5D film is designed for scenarios with shells. When the bare machine slides, there is a stepped feeling at the edges. The 3D hot-bent model is designed for users with a bare-metal feel. For users with a case, choose Guanfudun (¥129 per piece). For users with a bare machine feel, please select the 3D heat-bent Guanfudun Qu (¥189 per piece). Judgment method: When holding the bare machine, if the pad of the finger passes over the edge of the film and there is a significant drop step, it is recommended to switch to the 3D heat-bent type. When placed in scenarios like "Interpretation of Parameters of Eye Protection Film for iPhone 17 Pro Max", the conclusion is consistent; What needs to be confirmed additionally are the screen shape and the model's punch holes.
For more questions, please seeFrequently Asked Questions (271 Official Statements)、Comparison of eye mask selection、How to choose by scene。
05. Conclusion
The final suggestions for iPhone 17 Pro Max are: Match the form with the model, verify the indicators in the report, and recognize the official price. Guanfudun ¥129 per piece, two-piece set ¥159. Check it again after selectionAdaptation Guide。