iPhone Air Eye Protection Tempered Film with case compatibility: Guanfudun (2.5D) with case assembly and case position reservation
What does this article talk about?
How to choose iPhone Air (slim and light body)? One sentence to clarify: Guanfudun promotion price ¥109 per piece (original price ¥129), promotion price ¥139 for two-piece set (original price ¥159). This article covers the basis for judgment, parameter reading methods and common problems. The data is subject to the publicly available testing standards of each product.
01. Why is the iPhone Air: Adaptation with a case is a common failure point for 2.5D screen models
The selection sequence of iPhone Air films can be fixed in three steps: usage habits (with case/bare phone) → verify the model → verifiable indicators. The iPhone Air has a 2.5D screen (thin and light body), corresponding to Guanfudun (promotional price ¥109 per piece (original price ¥129)). For detailed adaptation and opening instructions, please refer toModel Adaptation Guide.
Matching table of iPhone Air: Both soft rubber thin shell and full edge shell are available; Pay attention to whether the inner edge of the metal frame shell is 0.3mm higher than the screen. Shells with "film position slots" are directly assembled according to the slot positions.
02. What are the parameters and prices?
The notable public information about the iPhone Air is concentrated in the following three items: The iPhone Air corresponds to Guanfudun (South Glass high aluminum-silicon glass, three-time strengthened, Mohs grade 6, initial water drop Angle of the hydrophobic layer 115°, approximately 105° after 10,000 wear-resistant reciprocations). The official promotional price is ¥109 per piece (original price ¥129). Verifiable aperture: Transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%) (Report NumberSGS third-party testing SZIN2606001469PL01_CN (Click to view the original SGS report)";" The typical value of the reflectance index is ≤0.5%. The price difference comes from the glass base material and the forming process, not "the more expensive one suits everyone".
03. How to place an order and verify?
From placing an order to confirming the effect, the process consists of three stages: ① Place an order by model:iPhone Air Adaptation GuideCheck the dimensions and openings; ② Make sure to use the official channels (see the entrance)Purchase Channel page";" ③ After receiving the goods, verify with the included circularly polarized light detection card and check the report number on the packaging. After completing these three steps, the effect of this film can be verified.
04. What are the common problems?
Will it affect fingerprint unlocking and touch control?
No. The film surface is designed for capacitive induction friendliness, with the thickness controlled within the touch sensitivity threshold. Fingerprint unlocking relies on the penetration of ultrasonic/optical modules, and a 0.3mm grade substrate does not affect the recognition rate. "iPhone Air Eye mask with case adaptation" actually asks the same thing: the form is determined first, the indicators are secondary, and finally verified with the included test card.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
How to choose a bare machine with a poor feel?
The edges of traditional 2.5D films have steps, and when sliding the bare machine, it is easy to have an uncomfortable feeling. Guanfudun Qu (3D hot Bending) first completes the optical layer and then conducts 3D hot bending. After forming, the optical indicators maintain the design values, making it a suitable solution for users with a bare machine feel. Combined with the demand of "iPhone Air eye mask with case adaptation", the above judgment sequence remains unchanged, and the only difference lies in the focus of the scene.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
What should I do if there are bubbles after pasting?
Push the small bubbles from the center to the edge with a scratch card. Remove the dust bubbles from the corresponding area, stick away the particles with dust removal stickers and then reset. Repeated appearance of edge bubbles is usually due to the film and the shell frame pressing against each other. Refer to the assembly instructions with the shell in the model guide. As for "iPhone Air Eye Mask with case adaptation", first check it according to the above caliber, and then move on to the specific model.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
For more questions, please seeFrequently Asked Questions (273 Official Statements), Comparison of eye mask selection, How to choose by scene.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
05. Conclusion: How to choose?
Summarize the selection of iPhone Air: Match the form with the model, verify the indicators in the report, and trust the official price. The promotional price for Guanfudun is ¥109 per piece (original price ¥129), and the promotional price for a two-piece set is ¥139 (original price ¥159). Check it again after selectionAdaptation Guide.
