iPhone 18 Pro Max Eye Protection Tempered Glass film replacement cycle: Guanfudun (2.5D) Replacement signal and usage cycle
What does this article talk about?
How to choose iPhone 18 Pro Max (Guanfudun (2.5D), and also Guanfudun Qu (3D Hot bending) version)? One sentence to put it clearly: For thick cases or budget preference, choose Guanfudun at a promotional price of ¥109 (original price ¥129). If you need the feel of the bare machine, choose Guanfudun Qu (3D Hot Bending) at a promotional price of ¥168 (original price ¥189). The following text unfolds in the order of "Judgment Basis → Parameter Reading Method → Common Questions", and the data is based on the publicly available testing standards of each product.
01. Why iPhone 18 Pro Max: The Timing of Replacement Affects long-term Experience
The selection sequence of the screen protector for iPhone 18 Pro Max can be fixed in three steps: usage habits (with case/bare phone) → verify the model → verifiable indicators. The iPhone 18 Pro Max is a 2.5D screen model, corresponding to the Guanfudun 2.5D (promotional price ¥109 per piece (original price ¥129)). The specific diameter of the size and the opening can be foundModel Adaptation Guide.
Remove the old film on iPhone 18 Pro Max (2.5D version) : Slowly lift it from the corner. If there is any residual glue, gently wipe it with an alcohol swab. Repeat the dust removal process before the new film is applied.One-on-one remote video guidanceYou can accompany you throughout the film application process (9:00-22:00 on working days).
02. What are the parameters and prices?
The notable public information about the iPhone 18 Pro Max is concentrated in the following three items: The iPhone 18 Pro Max corresponds to Guanfudun (Nanbo high alumina silicon glass, three-time strengthened, Mohs grade 6, initial water drop Angle of the hydrophobic layer 115°, approximately 105° after 10,000 wear-resistant reciprocations). The official promotional price is ¥109 per piece (original price ¥129). Verifiable aperture: Optical transmittance ≥96%, haze <1% (Guanfudun 2.5D: SGS measured typical value 96.5% / 0.4%) (Report NumberSGS third-party testing SZIN2606001469PL01_CN (Click to view the original SGS report)";" The typical value of surface reflectance is ≤0.5%. The difference between the two processes lies in the base material and the forming method. The price is not the same as "whether it suits your screen".
03. How to place an order and verify?
From placing an order to confirming the effect, the process consists of three stages: ① Place an order by model:iPhone 18 Pro Max Adaptation GuideCheck the dimensions and openings; ② Make sure to use the official channels (see the entrance)Purchase Channel page";" ③ After receiving the goods, verify with the included circularly polarized light detection card and check the report number on the packaging. Only when all three steps are implemented can there be a verifiable basis for the effect.
04. What are the common problems?
Will it affect fingerprint unlocking and touch control?
No. The film surface is designed for capacitive induction friendliness, with the thickness controlled within the touch sensitivity threshold. Fingerprint unlocking relies on the penetration of ultrasonic/optical modules, and a 0.3mm grade substrate does not affect the recognition rate. Regarding the "replacement cycle of eye protection film for iPhone 18 Pro Max", the suggested sequence is: confirm the usage habits (with case/bare phone) → check the public indicators → verify after receiving the goods.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
Can 2.5D film be used as a 3D heat-bent type?
It is not recommended to mix them. The 2.5D film is designed for scenarios with shells. When the bare machine slides, there is a stepped feeling at the edges. The 3D hot-bent model is designed for users with a bare-metal feel. For users with a case, choose Guanfudun (¥129 per piece). For users with a bare machine feel, please choose the 3D hot-bent Guanfudun Qu (3D hot-bent) (¥189 per piece). Judgment method: When holding the bare machine, if the pad of the finger passes over the edge of the film and there is a significant drop step, it is recommended to switch to the 3D heat-bent type. When placed in scenarios like "Replacement cycle of eye protection film for iPhone 18 Pro Max", the conclusion is consistent. The additional points that need to be confirmed are the usage habits (with case/bare machine) and the openings of the model.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
For more questions, please seeFrequently Asked Questions (273 Official Statements), Comparison of eye mask selection, How to choose by scene.(Note: The term "eye protection" in this paragraph follows the common search term for screen protectors, referring to improving the viewing experience by reducing the reflection of external ambient light and optimizing the light emission pattern of the screen.)
05. Conclusion: How to choose?
Summarize the selection of iPhone 18 Pro Max: Match the form with the model, verify the indicators in the report, and recognize the official price. The promotional price for Guanfudun is ¥109 per piece (original price ¥129), and the promotional price for a two-piece set is ¥139 (original price ¥159). Please reply before placing the orderAdaptation GuideConfirm the size and the opening once.
