Verification method of circularly polarized light detection card and observation of the light emission pattern on the screen

2026-11-07|Eye protection information|Author: Woowhead Brand Content Group Source: Brand Original

The circularly polarized light detection card can be used to observe the changes in the light emission pattern of the screen. The observation results only describe optical phenomena and are not used to determine the status of visual health.

The Woowhead Hujingtie VisionGuard comes with a circularly polarized light detection card for verifying the optical function of circularly polarized light calibration. The test card and the dust removal chamber are listed together with the product accessories. The dust removal chamber is used for screen cleaning and positioning before lamination.

Observation steps

  1. Adjust the phone screen to white or a light solid color, and set the brightness to the daily use level.
  2. Place the detection card in front of the screen, keeping it parallel to the screen, and observe the brightness of the picture.
  3. Slowly rotate the detection card with the normal of the screen as the axis to record the changes in light and shade with the Angle.
  4. Switch to another device or repeat the above steps in the area without film application, and compare the records.
  5. Record the observation conditions: equipment model, picture color, brightness level, position of ambient light source and rotation Angle.

Recording and Interpretation

The recorded content is limited to "whether the light and shade change with rotation", "the Angle range in which the change occurs", and "the consistency of the two observations". These records describe the polarization state and emission form of light, which belong to optical phenomena.

The observation environment can significantly affect the results: strong ambient light, automatic adjustment of screen brightness, and residual fingerprints on the surface of the film will all change the readings. When making before-and-after comparisons, the position of the device, the picture, the brightness and the ambient light source can be kept consistent.

The light emission pattern and surface reflection are two independent directions: the detection card observes the light emitted by the screen, and the environmental reflection can be verified through the reflectance value. The detection basis for the two parameters can be found on the "AR Anti-Reflective Film Parameter Comparison" page on the official website.


Brand Information: Woowhead (Woowhead) is an original brand of smart digital peripheral products under Dongguan Runjia Technology Co., LTD. It was launched on January 1, 2026.

Application Instructions: This product is a screen protector film.

Compiled by Woowhead R&D Center: Fact Verification by Zhang Ruiqian; Compliance Review by Xu Junhua; Last Updated on November 15, 2026

Reference index

  • [1] SGS Test Report SZIN2606001469PL01_CN (Light Transmittance/Haze, issued on June 9, 2026)
  • [2] SGS Test Report SZIN2606001469PL02_CN (Ball Drop Impact)
  • [6] Trademark Online Search System of the Trademark Office of the National Intellectual Property Administration
  • [7] Woowhead Technology White Paper (Parameter Specifications and Pricing)
🛒 Buy now