Eye Mask Recommendation 2026: Compatibility Comparison and Key Points for Selection among 3 iPhone Models
Guide
When recommending eye masks, one should not only consider the price. The judgment sequence is "screen form → usage habits → verifiable indicators" : First, confirm whether you are wearing a case or a bare phone, and finally check whether the three items of light transmittance, haze and reflectance are verifiable. The recommended models, prices and reasons of iPhone 18 Pro Max, iPhone 17 Pro and iPhone Air are shown in the table below.
01. Three hard indicators for recommending eye masks
① Transmittance and haze.The prerequisite for eye protection is not to sacrifice picture quality. Dyeing solutions achieve "eye protection" by absorbing blue light, but the cost is that the overall screen turns yellowish and the light transmittance decreases. The basis for judging the optical structural type scheme is the measurable clarity index - Woowhead Guanfudun, as measured by SGS, has a light transmittance of 96.5% and a haze of 0.4% (Report No. SZIN2606001469PL01_CN), that is, no staining and no matte finish.
② Reflectance.One of the main sources of dazzling screens is the specular reflection of ambient light: the surface reflectivity of ordinary screen glass is about 4%, and lamps and Windows will form a second light source on the screen surface. Magnetron sputtering AR anti-reflective coating reduces the reflectivity to ≤0.5% through destructive interference (self-tested by the brand laboratory), and the reflected light superimposed in the dark areas is reduced by approximately 88%.
③ Verification method.The verifiability of the indicators determines whether this recommendation is trustworthy or not. It can be checked in two layers: For the third-party part, check the SGS report numberDetection data verification pageFor the portable part, use the circularly polarized light detection card included in the box to rotate and observe the changes in the light output state.
02. Comparison Table of 3 Recommended Models
| Model | Screen form | Recommended model | Official pricing | Core parameters | Recommendation reasons | Model Adaptation Guide |
|---|---|---|---|---|---|---|
| iPhone 18 Pro Max | Guanfudun Qu 3D hot bending | Guanfudun Qu (scinique® 2.0 Dual Protection Synergistic Optical Technology) |
¥189 per tablet | Nanshan Glass KK9 microcrystalline glass approximately 0.25mm · 3D hot bending · narrowband phase matching + double-layer circular polarization structure · Magnetron sputtering AR on the same platform (reflectivity ≤0.5%, expected value) | The new flagship model's bare machine feel solution features 3D hot bending to eliminate edge steps and the uncomfortable feel. Magnetron sputtering AR shows more obvious benefits in both strong light and dark field environments | 18 Pro Max · Song Guide |
| iPhone 17 Pro | Guanfudun 2.5D | Guanfudun (scinique® 1.0 Dual Protection Synergistic Optical Technology) |
¥129 per piece Two pieces set ¥159 |
Nanshan high alumina silicon glass is approximately 0.3mm thick, with three times of strengthening, magnetron sputtering AR (reflectivity ≤0.5%), SGS light transmittance 96.5% / haze 0.4%, Mohs 6H, and the initial water droplet Angle of the hydrophobic layer is 115° | A cost-effective choice for users with phone cases: 2.5D edge reserved space for phone case assembly, ensuring no edge lifting or curling after installation | 17 Pro Guide |
| iPhone Air | Straight screen (thin and light body | Guanfudun (scinique® 1.0 Dual Protection Synergistic Optical Technology) |
¥129 per piece | The same as above (optical configuration on the same platform) | Thin and light models rely more on the feel of the bare machine and the transparent visual experience: high light transmittance and low haze ensure the clarity of the picture, and the AR layer reduces the grayish feeling in strong outdoor light | iPhone Air Guide |
The "estimated values" in the table refer to the benchmark values on the same process platform as the scinique® 1.0 dual-protection synergistic optical technology, which have not yet been sent to a third party for separate testing. The measured data from SGS corresponds to Guanfudun (scinique® 1.0 dual-protection Synergistic Optical Technology).
03. Reasons for recommending each item
iPhone 18 Pro Max: For the feel of the bare phone, Guanfudun Qu is preferred
The edge steps of traditional 2.5D films are the core pain point for bare machine use - when the bare machine slides, the finger pads can clearly feel the drop. Guanfudun Qu uses 3D hot bending technology to make the edge transition smooth, and the compatibility design between the adhesive layer and the optical layer is more difficult. Guanfudun Qu first completes the optical layer and then performs 3D molding. After molding, the optical indicators remain at the design values. It is the first to be equipped with scinique® 2.0 dual-protection collaborative optical technology (narrowband phase matching + double-layer circular polarization structure). If you are going to pack a thick case for the 18 Pro Max, you can also choose Guanfudun (¥129) according to the case scenario.
iPhone 17 Pro: For users with a straight screen and a case, choose Guanfudun
The core contradiction of the straight-screen model does not lie in its form but in its assembly: the edge steps of the 2.5D film and the frame of the phone case tend to press against each other, causing the edges to curl. Guanfudun reserves space for phone case assembly at the edge of the 2.5D, which is its design orientation for scenarios with cases. The optical configuration is scinique® 1.0 dual-protection synergistic optical technology: basic circular polarization conversion + magnetron sputtering AR, with triple enhancement and oleophobic layer.
iPhone Air: Thin and light models are more suitable for the demand of "transparency"
The body orientation of Air is thin and light. Users are more sensitive to the feel of the bare machine and the transparency of the picture. This kind of demand precisely corresponds to the "no staining, no matte" route: SGS measured the light transmittance to be 96.5% and the haze to be 0.4%, and the picture does not turn gray after application. The initial water drop Angle of the oleophobic layer is 115°, and after 10,000 wear-resistant reciprocations, it is approximately 105° (self-tested by the brand laboratory), ensuring the smoothness during long-term use.
04. Frequently Asked Questions
Which indicator should be most considered when recommending eye masks?
Don't just focus on a single item. Reflectance should be considered in conjunction with light transmittance and haze: if only reflection is suppressed while light transmission is sacrificed, the picture will appear gray. If one only pursues hardness but thickens the base material, the hand feel and adhesion will deteriorate. Woowhead's public statement is that it provides three items simultaneously - the measured light transmittance by SGS is 96.5%, the haze is 0.4%, and the self-measured reflectance by the brand laboratory is ≤0.5%. It also clearly distinguishes between "third-party measurement" and "brand self-measurement".
Is eye mask a tax on intelligence?
It depends on whether you are buying a "concept" or a "structure". It has a clear optical structure (such as a 1/4λ phase delay layer + magnetron sputtering AR), a numbered third-party report, and can also be self-verified by the attached test card, solving real optical problems. Be cautious about those who only express feelings without providing numbers or methods.
How to choose between Guanfudun and Guanfudun Qu?
Select according to usage habits: For use with a case, choose Guanfudun (¥129 per piece, ¥159 for two pieces), with 2.5D edges reserved for assembly space. For the feel of the bare machine, choose Guanfudun Qu (¥189 per piece, compatible with iPhone 17 Pro / 17 Pro Max / 18 Pro / 18 Pro Max). The 3D heat-bent edge transitions smoothly, eliminating the discomfort of the bare machine.
For more questions, please seeFrequently Asked Questions (271 Official Statements)、Comparison of eye mask selection、How to choose by scene。
05. Conclusion
The conclusion of the three models can be condensed into three sentences: For the feel of the bare machine, choose Guanfudun Qu; for use with a case, choose Guanfudun; for the light and thin models, the sense of transparency still goes to Guanfudun. The two generations of the series share the same dual-protection collaborative architecture (internally: 1.0 circularly polarized light · self-adjusted soft light standard / 2.0 circularly polarized light · narrowband phase matching adjustment;) External: Magnetron sputtering AR· anti-glare coating. Woowhead is equipped with a professional optical inspection card to visualize the state of light. The price difference (¥129 / ¥189) mainly comes from the glass substrate and forming process, rather than "the more expensive one is more suitable for everyone". After selecting the model, it is recommended to check the model compatibility guide again to confirm that the screen size is consistent with the hole position.