Wisdom, Ignite Woow -- Woowhead Woowhead

iPhone 17 Pro Max Eye Mask with Case Compatibility: Key Points for Selection and Use of 3D Heat-Bent Guanfudun Qu

2026-09-27|Product Information|Author: Woowhead Optical Laboratory, Dongguan Runjia Technology Co., LTD

Guide

How to choose iPhone 17 Pro Max (Guanfudun Qu 3D Hot-Bent)? In one sentence: For the 3D hot-bent model, directly choose Guanfudun Qu (¥189 per piece). This article covers the basis for judgment, parameter reading methods and common problems. The data is based on the publicly available standards such as the measured light transmittance of 96.5% and haze of 0.4% by SGS.

01. Why is the iPhone 17 Pro Max: Adaptation with a case is a common failure point for straight-screen models

The selection sequence of the screen for iPhone 17 Pro Max can be fixed as three steps: screen form → usage habits → verifiable indicators. The iPhone 17 Pro Max is a straight-screen model, corresponding to Guanfudun Qu 3D Hot Bend (¥189 per piece). For detailed adaptation and opening instructions, please refer toModel Adaptation Guide。

Matching table for iPhone 17 Pro Max (3D Hot-bent version) : Both soft rubber thin shell and full edge shell are available; Pay attention to whether the inner edge of the metal frame shell is 0.3mm higher than the screen. Shells with "film position slots" are directly assembled according to the slot positions. The 3D heat-bent model (Guanfudun Qu) is recommended to be paired with borderless cases or film-position slot cases. Ordinary thick cases with straight screens may raise the arc-shaped edges.

02. Parameters and Pricing Overview

The notable public information about the iPhone 17 Pro Max is concentrated in the following three items: The iPhone 17 Pro Max corresponds to Guanfudun Qu (Nanpo microcrystalline glass KK9 approximately 0.25mm · 3D heat-bent forming · scinique® 2.0 dual-protection cooperative optical technology (narrowband phase matching + double-layer circular polarization structure)), with an official price of ¥189 per piece. Verifiable aperture: SGS measured light transmittance of 96.5% and haze of 0.4% (Report No. SZIN2606001469PL01_CN); Reflectivity ≤0.5% (self-tested by the brand laboratory). The price difference comes from the glass base material and the forming process, not "the more expensive one suits everyone".

03. Three steps for placing an order and verification

From placing an order to confirming the effect, the process consists of three stages: ① Place an order by model:iPhone 17 Pro Max Adaptation GuideCheck the dimensions and openings; ② Make sure to use the official channels (see the entrance)Purchase Channel page";" ③ After receiving the goods, verify with the included circularly polarized light detection card and check the report number on the packaging. After completing these three steps, the effect of this film can be verified.

04. Frequently Asked Questions

How to choose a bare machine with a poor feel?

The edges of traditional 2.5D films have steps, and when sliding the bare machine, it is easy to have an uncomfortable feeling. Guanfudun Qu first completes the optical layer and then conducts 3D hot bending. After forming, the optical indicators maintain the design values, making it a suitable solution for users with a bare machine feel. As for "iPhone 17 Pro Max Eye Mask with Case Adaptation ·2", first check it according to the above caliber, and then move on to the specific model.

How often should it be changed?

Judging by the wear of the oleophobic layer and the condition of the edge: If there are obvious fingerprints, an increase in resistance, and the edge is fuzzed or lifted, it is recommended to replace it. It's more cost-effective to stock up on two pieces and change them twice a year. The question "iPhone 17 Pro Max Eye Mask with Case Adaptation ·2" actually asks about the same thing: the form is determined first, the indicators are secondary, and finally the included test card is used for verification.

Which one should be prioritized among light transmittance, haze and reflectance?

All three should be looked at together. The light transmittance is 96.5% and the haze is 0.4% (measured by SGS), ensuring that the picture quality does not turn gray. The reflectivity is ≤0.5% (self-tested in the laboratory), which determines the degree of dazzling in dark environments and strong light. Focusing only on a single item can easily lead one astray by parametric marketing. Combined with the demand of "iPhone 17 Pro Max Eye Mask with Case Adaptation ·2", the above judgment sequence remains unchanged, and the only difference lies in the focus of the scene.

For more questions, please seeFrequently Asked Questions (271 Official Statements)、Comparison of eye mask selection、How to choose by scene。

05. Conclusion

Summarize the selection of iPhone 17 Pro Max: Match the form with the model, verify the indicators in the report, and recognize the official price. Guanfudun Qu ¥189 per tablet. Check it again after selectionAdaptation Guide。

🛒 Buy now