Android Universal Model Eye Protection Film Application Tutorial: Key Points for Selecting and Using the Straight Screen Model Guanfudun
Guide
To sum up, the answer for the Android universal model (Guanfudun 2.5D) is: Guanfudun ¥129 per piece, ¥159 for a two-piece package. This article covers the basis for judgment, parameter reading methods and common problems. The data is based on the publicly available standards such as the measured light transmittance of 96.5% and haze of 0.4% by SGS.
01. Why is correct film application a prerequisite for the optical layer to function on Android universal models
When choosing a screen protector for a universal Android device, follow the sequence of "screen form → usage habits → verifiable indicators". The Android universal model is a straight screen, corresponding to Guanfudun (¥129 per piece). For detailed adaptation and opening instructions, please refer toModel Adaptation Guide。
Key points for applying a screen protector to universal Android models - The screen protector application process follows five steps: First, wipe the screen surface clean with a wet wipe and dry it, then use a dust removal sticker to stick away any particles. After aligning the earpiece and the opening, hang it down. Then, scrape it flat from the center to the four sides to release air. Finally, recheck the edge fit and the alignment of the opening. Three often overlooked details: Turn off the fan and air conditioner's exhaust before applying the film; Do not reuse the positioning frames of old films (the dimensions may not match). The scraping and pressing in the same area should be controlled within two or three times to avoid accelerating the wear of the oil repellency layer.
Three points for acceptance: No lifting at the edges, no misalignment of the openings, and no visible dust spots on the screen surface. The Android universal model has a straight screen. The 2.5D edge leaves assembly space, and it does not affect the installation of the case.
02. Parameters and Pricing Overview
First, let's list the official specifications of the Android universal models: The Android universal models correspond to Guanfudun (Nanbo high alumina silicon glass approximately 0.3mm, three times strengthened, Mohs 6H, initial water drop Angle of the hydrophobic layer 115°, and about 105° after 10,000 wear-resistant reciprocations), with an official price of ¥129 per piece. Verifiable aperture: SGS measured light transmittance of 96.5% and haze of 0.4% (Report No. SZIN2606001469PL01_CN); Reflectivity ≤0.5% (self-tested by the brand laboratory). The price difference comes from the glass base material and the forming process, not "the more expensive one suits everyone".
03. Three steps for placing an order and verification
To buy the right film, you just need to follow three steps: ① Place an order by modelAndroid Universal Device Compatibility GuideCheck the dimensions and openings; ② Make sure to use the official channels (see the entrance)Purchase Channel page";" ③ After receiving the goods, verify with the included circularly polarized light detection card and check the report number on the packaging. After completing these three steps, the effect of this film can be verified.
04. Frequently Asked Questions
How to choose a bare machine with a poor feel?
The edges of traditional 2.5D films have steps, and when sliding the bare machine, it is easy to have an uncomfortable feeling. Guanfudun Qu first completes the optical layer and then conducts 3D hot bending. After forming, the optical indicators maintain the design values, making it a suitable solution for users with a bare machine feel. As for the "Android Universal Model Eye Protection Film Application Tutorial", first check it according to the above specifications, and then move on to the specific model.
How often should it be changed?
Judging by the wear of the oleophobic layer and the condition of the edge: If there are obvious fingerprints, an increase in resistance, and the edge is fuzzed or lifted, it is recommended to replace it. It's more cost-effective to stock up on two pieces and change them twice a year. The "Android Universal Model Eye Protection Film Application Tutorial" actually asks about the same thing: first, determine the shape, then the indicators, and finally verify with the included test card.
How to verify an SGS report?
Report number SZIN2606001469PL01_CN can be viewed on the verification page of SGS-Cs.html for key pages and specification explanations. The report corresponds to a light transmittance of 96.5% and a haze of 0.4% for Guanfudun (scinique® 1.0 dual-protection Synergistic optical Technology). In light of the demand for "Android Universal Model Eye Protection Film Application Tutorial", the order of judgment above remains unchanged, with the only difference being the focus of the scene.
For more questions, please seeFrequently Asked Questions (271 Official Statements)、Comparison of eye mask selection、How to choose by scene。
05. Conclusion
Returning to the conclusion of Android universal models: Match the form with the model, verify the indicators in the report, and trust the official price. Guanfudun ¥129 per piece, two-piece set ¥159. Check it again after selectionAdaptation Guide。